Briquette Press BP 500A

ump BP 500A

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is intended for compressing secondary raw materials into briquettes (briquette shape: rectangular). Technical specifications of the press: Dimensions: Length: 1800 mm (2100 mm for transport) Width: 1800 mm (2000 mm for transport) Height: 1900 mm (2200 mm for transport) Net weight: 2945 kg Power supply: 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: 450 kg/h (+/-50 kg depending on raw material type and fraction) Noise level: A-weighted sound pressure level at operator’s station: 77.8 dB +/-5 dB Compression pressure: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Pressure: Max. 300 bar Raw material moisture content: No more than 14% Briquette dimensions: Width: 150 mm Thickness: 60 mm Length: 40-105 mm Permissible ambient temperature for operation: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system – controls the hydraulic press system. There are four electric motors: the first (30 kW) drives the main hydraulic pumps, the second (1.1 kW) powers the cooling hydraulic pump, the third (0.55 kW) drives the cooling fan of the oil system, and the fourth (1.5 kW) drives the sawdust feed screw. The operation of the motors and hydraulic valves is managed via contactors and intermediate solid-state relays by a microprocessor with expansion modules. For visualization and parameter adjustment, a liquid crystal display with buttons is provided. Nlodsxmav Njpfx Afrei Hydraulic system – manages the operation of hydraulic cylinders using pumps, high- and low-pressure valves, solenoid valves, and hoses. There are three hydraulic cylinders: the first is the main cylinder for compressing sawdust, the second is a vertical cylinder for initial sawdust compaction, and the third is a forming cylinder for moving the briquette form. Also installed are an oil cooling system with a pump and air cooler. Oil filtration is performed by the main high-capacity filter, a filter for the cooling system, and a fine filtering unit. Feeding of raw material into the press is performed by an integrated loading hopper. The raw material in the hopper is mixed intermittently to prevent bridging. The mixer is driven by a chain from the auger gearmotor. The auger cyclically feeds the material to the shaft of the vertical cylinder. The hopper is equipped with two level sensors – lower and upper. When the hopper is enlarged, the sensors can be repositioned as needed. Control – dual-mode, manual and automatic, is provided. All control equipment is mounted in the electrical cabinet. Automatic control constitutes the normal press operation without operator intervention. Manual control is used for press setup, troubleshooting, returning the cylinders to their home positions, or in emergency situations. Operation is facilitated by a display located on the cabinet door. It allows for viewing and adjustment of input parameters, as well as real-time monitoring of press status and error messages.

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Nsdolht H Eepfx Afrjli Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Dimensions: length 1800 mm, width 1800 mm, height 1900 mm . Njdpfx Aec Nb Rfefrsli Weight netto 3000 kg. Eletric power of the press: 380 V 50 Hz 33 kW 70-100 A Capacity of the press: 450-500 kg/h Pressure: minimum 1000 kg/cm², maximum 1700 kg/cm2 Dimensions of the briquette: length 150 mm width 60 mm height 40 – 105 mm

Condition: excellent (used), Year of construction: 2011, 6-axis industrial robot ABB IRB6640-235/2.55 Nljdpfx Afoixqhuorsi Year of manufacture 2011 With teachpanel, IRC5 control, connection cable, robot body We have more robots in stock, mainly from KUKA and ABB

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer Nljdpfegr Er Sox Afrsi TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: good (used), Good, used condition Main motor: 11 kW Nledpfx Afjt Hxuderei Maximum throughput: 200 kg/h Year of manufacture: 12/2008 / Technically tested: 01/2025 Briquettes: 150x60 mm . *Used machine, purchased as is Functional guarantee upon delivery

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Nlsdji Hpk Uspfx Afrei Weight: 500kg

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work Nodeiim Tqepfx Afroli -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 278 h, Max. Workpiece Size for Peripheral Milling: X = 3,620 mm Maximum Travel Distances: X = 3,865 mm Minimum Room Height: 3.20 m Machining in Y and Z Y = 1,600 mm; Maximum Panel Width 2,000 mm Maximum Workpiece Height 300 mm Measured from the top edge of the vacuum suction cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured via USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE – HIGH-SPEED MILLING Control Siemens industrial PC control Handheld remote control unit for machine operation MILLING HEAD 5-axis head 7840, Power: 12 kW n(max) = 0 - 24,000 rpm, steplessly adjustable Cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holding fixture Max. Tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing the standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, including saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X, 6 in Y direction, 32 mm pitch n(max) 1,000 - 5,710 rpm steplessly adjustable 6 horizontal spindles 2 double drilling spindles in X 1 double drilling spindle in Y Including saw unit Integrated saw unit for sawing / grooving in X direction n(max) 1,000 - 7,330 rpm steplessly adjustable MACHINE TABLE Machine table with 6 consoles, pneumatically clamped, adjustable in X direction Display and positioning of consoles and suction cups via software program 2 lateral stops at field A and D, 2 large buttons for clamping and releasing workpieces, 2 tape-measure position displays for console positioning in X relative to stop at field A/D, tape-measure positioning for suction cups at each console in Y relative to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy workpieces TOOL CHANGERS Tool changer 7996, 18-position magazine (carousel), automatically moves in X-axis direction Moving tool changer 7886, 1-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatically operated Max. Tool diameter: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED lighting for the machining area. SAFETY OPTIONS Safety enclosure according to CE standards Protective fencing on the side and rear EQUIPMENT VARIANTS AND ACCESSORIES – LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Each module can simultaneously control up to 5 frame clamping elements. Simultaneous opening/closing of connected frame clamping elements, including foot pedal for operation, max. 2 modules per field A and field D available; OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum suction cups Nljdpfx Afoxfaf Ujrsi

Year of construction: 2006, condition: good (used), Generator, emergency generator, generator, generator, power generator, generator, emergency generator -Electric start -Power: 3.8 KVA 50 Hz -petrol engine Nedpfxoflmm Sj Afroli -only: 95 operating hours -2x Schuko: 230 volts, 1 socket slightly damaged -Dimensions unit: 580/530/H615 mm -Weight: 79 kg