Sliding table saw

SCM SIGMA 115 PLUS

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P Dsdpfxjwu Ahgs Ab Tecr

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW Djdpfsmt Hhwsx Ab Tscr

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Dsdpfx Aju T Tuwjb Tocr Operating Units: 10 nr

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Dedpfxjukhd Ao Ab Tjcr Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Dcodeuc Idxepfx Ab Tsr Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide Dodev Sqrpjpfx Ab Tscr - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width 1. aggregate rubberized roller 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Dsdpfxjghymhj Ab Tocr Vacuum carpet

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Djdpsw Ec Riofx Ab Tscr Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Dedpfx Absvi H Die Tecr Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 62 kg, Vacuum lifter designed for handling black steel, stainless steel, and other sheet metal. The device can be optionally equipped with a compressed air impulse system for easy sheet release. It is compatible with all types of cranes and overhead hoists. Sample specification: Lifting capacity – 600 kg Power supply – Permanent 230V Working position – Horizontal Number of suction cups – DS.250-8 Dedpfx Abow Eltts Tocr Minimum working area dimensions – 0.6m x 0.4m Maximum working area dimensions – 1.5m x 3.0m Compressed air impulse – Optional upgrade Device weight – 62 kg The listed price applies to the machine with the above parameters. Custom configuration – available upon request.