Wood shredder, shredder, chipper

mütek MRZ 830 ECO

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Gedpfsd Dgw Usx Agbjtt Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Hopper inlet 2.26 m x 1.65 m Gtsdpjwu Nwhjfx Agbjt

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Gtedpeqi Hhpefx Agbjt Welded construction, grinding tools made of special steel The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet

Year of construction: 2025, condition: new, machine/vehicle number: 020, Star screen for biogas plants for processing a wide variety of materials such as maize, sugar beet etc.. The screen deck is used for sugar beet after the crusher to separate oversized particles. Or before shredding to sort out foreign bodies and to protect the shredding machine, e.g. with maize. We offer different lengths, shaft numbers and grain sizes. This depends on the material and the throughput rate. Gsdpjbytafjfx Agbjtt Delivery times approx. 20 weeks

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February. Gtsdpfeumubyex Agbet

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Gtjdpfeff Sbisx Agbst Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: used, heavy-duty surface planer SCM F 520 planing width 520 mm table length 2,960 mm hydraulic height adjustment of infeed table via foot pedal, with micrometer display for chip removal 4-knife safety cutterblock sharp and hollow joint adjustment main motor 4 kW electric motor brake Gtedoxzdguspfx Agbst CE version Machine is FULLY FUNCTIONAL and in GOOD CONDITION from vocational school available from stock in Lieboch

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Godpfjw Ufuhex Agbett Fine milling unit (top and bottom) Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Pneumatic on/off. Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication.

Condition: used, Intake opening: 1.200 x 1.600 mm Gtodpjbq Stqjfx Agbet Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Rotor width: 2500 mm Godsq I Rkdspfx Agbett Rotor diameter: approx. 500 mm Electric motor: 250 kW