Used Vetaphone Corona for sale (92)

Year of construction: 2016, condition: used, functionality: fully functional, The Vetaphone Corona Treatment System is used to boost surface energy before winding on film extruders, or prior to a laminating, printing, or coating process, in order to ensure good adhesion and high quality on the final product. Station VE1C-A(C4) 1920 QC, generator iCorona2-6kW, remote control TF415, ventilator RD62, transformer iHP200 6kW, 4 ceramic electrodes (not included). Pjdpfx Adjw I D Uysnerd

Year of construction: 1996, condition: ready for operation (used), Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. Pedpfogrn N Rox Adnerd

Condition: used, Year of construction: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18") Year: 2009 Consisting of Gathering machine Müller Martini 3681 Description: - Chain tensioning station Psdpfx Asxdx Tnjdnsrd - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Gantry system: Pfaff (yr 23) - Pump - Set up element: 3641 - Reject gate for incomplete products: 3714 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C15 S/35 (18") Year: 2009 Description: - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit: ICS C160 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Size: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Cover size: max 642 mm; min 203 mm Speed: max 12.000 c/h Equipment gathering machine • 18 stations • feeders 3691 • reject gate 3614 controls • miss and double sheet control • ASAC automatic self-adjusting calipers intermediate elements • spiral race away • 3 jogging elements • connected with perfect binder • 21 clamps • milling and roughening station • 2 hot melt spine gluing units • hot melt side gluing unit • 2 premelters • SF stream cover feeder • SF cover nipping and pressing station • smooth lay down device conveyor system • ca. 30 m • connected with Prjdpjrgpqcjfx Adnsd three knife trimmer • three knife trimmer MM Zenith 3672 compensating stacker • compensating stacker Müller Martini standards • standard accessories • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Predpevrip Hofx Adnod

Year of construction: 2021, operating hours: 400 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: Prsdpfx Adjwcp I Aenjd - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: good (used), Year of construction: 2012, 2012 overhauled Size max. 360 x 310 mm Pedpfxju Eubxo Adnsrd at least 140 x 100 mm Book block thickness max. 60 mm at least 3 mm Cover size max. 642 mm at least 203 mm Speed max. 18,000 c/h Equipment collecting machine - Chain tensioner - 18 stations - 18 feeders 3681 - Reject gate 3714 Checks - Missing and double sheet control - 2 jogging elements perfect binder - commander - 35 clamps - Clamp spacing 18" - Inlet channel with vibrator - Jogging station - Seam pressing station - Milling and roughening station - Double combined spine preparation station - Unit for gluing the spine with hot glue - Cam-controlled - Trolley spine gluing unit - Hot glue side gluing unit - Cam-controlled - Gluing unit on carriage side - 2 pre-melters - SF-Stream cover feeder - Cover scoring from 2 to 6 lines - Smooth depositing device Standard accessories - 1 set of operating instructions - condition - . clean in very good, working condition - available: - immediately

Condition: excellent (used), mileage: 330,224 km, power: 371 kW (504.42 HP), first registration: 03/2016, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 800 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Roof spoiler - Electrically adjustable exterior mirrors - High beam - Low-noise - Speed limiter - Alloy wheels - Air suspension - Air horn - Particulate filter - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater (parking heater) - Toolbox - PTO (Power Take-Off) = Further Information = Front axle: steered Rear axle 1: twin tires Rear axle 2: twin tires Technical condition: very good Visual condition: very good FREIGHTLINER CORONADO 6X4 TRACTOR UNIT EURO 6 L PACKAGE 505 HP DRIVE 6X4 WHEELBASE 520 CM AIR SUSPENSION MANUAL TRANSMISSION XXL SLEEPER CAB AIR CONDITIONING + PARKING HEATER TIPPER HYDRAULICS ADJUSTABLE FIFTH WHEEL ENGINE BRAKE ALCOA DURA-BRIGHT CRUISE CONTROL DIGITAL TACHOGRAPH FULL LEATHER INTERIOR Psdpfx Adovl S U Ejnerd REGISTERED IN THE EUROPEAN UNION!!!! WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Prjdpfjxz Ewnox Adnod

Condition: good (used), Year of construction: 2006, 8-color web width: 330 mm Corona UV Podpfx Ajxzr Erodnsrd etc.

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Prjdpfjxzrx Eox Adnod Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter Podpfsxznwkox Adnsrd • Maximum roll diameter (unwind): 360 mm • Maximum roll diameter (rewind): 300 mm • Unwinder shaft diameter: 3 inches

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,650 kg, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, oil tank capacity: 615 l, 12x is full set. Each 2500Eur/piece High-voltage Transformer–Rectifier (TR) set manufactured by ADOR Powertron / ADOR-CORONA, designed for supplying Electrostatic Precipitator (ESP) sections with stable high-voltage DC power. This unit converts 400 V / 50 Hz AC into 80–95 kV DC at approx. 1.4 A output. Built with an ONAN-type oil-cooled transformer, integrated rectifier assembly, HV bushings, protective circuits and monitoring components. Equipment from a working installation in Elektrėnai (LT). Fully maintained and suitable as a direct replacement or spare for large ESP systems. Transformer–Rectifier Unit: Brand: ADOR Powertron / ADOR-CORONA Application: High-voltage DC supply for ESP fields Input: 400 V AC, 50 Hz Output voltage: 80–95 kV DC Output current: 1.4 A (average) Rated power: 145 kVA Cooling type: ONAN (oil natural air natural) Oil volume: ~615 L Total weight: ~1650 kg Ambient temp range: –35…+50 °C Impulse withstand level: 250 kV Podpfxexy I Rbs Adnerd Enclosure: Outdoor-rated, heavy-duty steel tank with cooling radiators Additional components visible in photos Integrated high-voltage earthing switch (HV ground switch) Protective fuses & connection panel Oil gauge, breather, and filling ports Heavy-duty mounting frame Applications / Industries This TR set is used for powering: Electrostatic precipitators (ESP) Flue gas treatment systems (power plants, biomass boilers, CHP) Cement & lime kilns Metallurgical dust capture Waste-to-energy plants Industrial emission control systems One TR usually powers one ESP field. A full system typically uses 10–12 units, and a matching set is available from this site.

Condition: good (used), Year of construction: 2018, functionality: fully functional, For Sale: CARTES GT364VHSR (2018) Condition: Pre-owned, carefully maintained, fully functional Availability: By arrangement The CARTES GT364VHSR combines advanced technologies with a modular design, making it one of the most competitive solutions on the market. It not only guarantees premium finishing results but also enables the production of high-value labels with maximum efficiency and economy. Main Configuration - Modular machine with MHPS system: Automatic, independent positioning of each unit. 1. Infeed Unit - Servo-driven Ø76mm pneumatic expanding shaft (reels up to Ø800mm / 200kg) - Automatic web tension control based on reel diameter, end-of-material automatic stop - Electronic web guide with ultrasonic sensor, splicing table, pneumatic clamps & tape dispenser - High-sensitivity photocell for print mark or contrast point detection - Fully servo motor-controlled web transport - VETAPHONE Corona treater system, 2 kW 2. Flexo Varnishing Unit - Full rotary flexo varnishing with UV dryer (40–160 W/cm) - TRESU closed chamber "V" unit 3. Hot Stamping & Embossing Unit - 2 transverse and 1 longitudinal foil feeders - Hologram photocell & gauges 4. Silk Screen Printing Unit - Flatbed for full backgrounds, spot & tactile printing - UV curing system (29–250 W/cm) - Vacuum table for multiple frame sizes 5. Semi-rotary Die-Cutting with AGS & IDS - Gearless magnetic cylinder, die thickness: 0.2–2 mm - Air Gap System (AGS): Perfect cutting depth control from the first cycle, minimizing waste and die breakage - Image Distortion System (IDS): Software-based die adaptation (+/-20%), allowing reuse of existing dies for different repeat lengths 6. Powerscope BST 5000 with motorized support 7. Outfeed Unit - Fully servo-driven draw & rewind system with slitting (10 razor blades) - Two Ø76mm shafts (up to Ø800mm & Ø500mm reels), automatic tension control (CW/CCW) - Additional Ø25mm shaft for special applications - Ø76mm matrix shaft (up to Ø500mm reels), optimized for high-speed matrix stripping of intricate shapes - PC for remote diagnostics & updates (Cartes support) Key Advantages - Highly modular configuration adaptable to production requirements - Multiple advanced finishing technologies integrated in one system - Cost efficiency via reduced waste and die reuse - Remote support & updates for long-term reliability Additional Equipment - Comprehensive accessory package included Pjdpfxexwl Dmj Adnsrd - Extensive range of spare parts available

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. The unit is in full working condition and is ready for immediate release. System Details: The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Podpfxjxwc Iis Adnsrd Key Features: Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Condition: good (used), Year of construction: 2006, web width: 330 mm Corona 8-color UV Cold Prjdpfexzr Dzox Adnjd In Production etc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Predpfx Aoxwaikjdnjd Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: used, Year of construction: 2010, format range from 15 1/2" to 30" with 1/ " print widths of up to 427 mm reel diameter in the unwinder up to 127 mm E + L paper path control device Tensiomatic paper path tension measuring device central AIC remote control automatic register special surface treatment of inking rollers for UV inks temperature control in ducts and oscillating rollers UV drying with air cooling and 10 UV lamps Pjdpfx Adexvz H Ujnsrd UV vapor extraction device maximum speed 300 m / min. die cut of registration system cold pressing of metallic foil laminating aggregate flexo printing unit format from 22" to 30" with 1/6" Corona cutting unit for self-adhesive labels printing form bender Grafotronic 440 maximum reel diameter 800 mm viewing table Master with cutting and editing capabilities shaft with five pairs of cutting discs three knife cutting blade module

Condition: new, Year of construction: 2025, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Prjdpfxebqk Nbo Adnsd Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Condition: used, mileage: 64,787 km, power: 95 kW (129.16 HP), first registration: 09/2011, overall weight: 5,000 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, -Mercedes Sprinter 513 ambulance -Ideal as a mobile practice, treatment vehicle or mobile corona test station -Has the latest hygiene standards -3-pin power connection outside 3+3 seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, on-board computer, air conditioning, central locking + radio remote control, Euro 5, fog lights, air conditioning in the rear area, air connections, power connections (230v available several times), sink, refrigerator, stretcher available, wing doors, side door / right, 2x side doors / left as storage space and as storage for oxygen bottle, no rust, roof spoiler, twin tires, total length: 6,170mm, width: 2,170mm, height: 2,900mm, empty weight: 3,715Kg, payload approx. 1285 kg, wheelbase: 3,665 mm etc. Subject to errors, prior sale and typos. Sale to businesses and export only. Psdpfx Adokbbr Donord !!!! Fg-7379!!!! Key no. 232!!!!!

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame Predpfx Adswq Ay Ijnjd MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: good (used), Year of construction: 2008, OMET FLEXY S330 Year of Manufacture: 2008 _____ Technical Specifications: - Number of Colors: 8 - Web Width: 350 mm - Print Width: 330 mm - Drying System: o UV drying on all stations Podpfxju St R Ej Adnord o 3 additional hot air dryers Unwinder: Single Rewinder: Double _____ Additional features: - 3 Corona Treaters - 1 turn bar - Material thickness: Min. 50 μm, Max. 350 μm - 1 Turn Bar for cold foil lamination - 2 Cutting Stations - 1 Laminating Unit for varnishing and self-adhesive lamination - Coldfoil - Camera Inspection _____

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Pedsvfx A Aspfx Adnord Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: used, mileage: 87,208 km, power: 100 kW (135.96 HP), first registration: 01/2012, overall weight: 3,880 kg, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, -VW Crafter intensive care ambulance -Sepcial bed with all reclining settings -Bear tail lift -Ideal as a mobile practice, treatment trolley or mobile corona test station -Complies with the current hygiene standards Psdpjkbbqxsfx Adnord -2 pole power connection in the outdoor area 3+2 seater, power steering, driver airbag, 6-speed manual gearbox, rev counter, power steering, electric windows, on-board computer, air conditioning, central locking + radio remote control, air conditioning in the rear area, air connections, power connections (230v several times available), washbasin, refrigerator, hinged doors, side doors/left/right as storage space and as storage for oxygen bottle, without rust, roof spoiler, single tires, total length:6.170mm, Width:2.170mm, Height:2.900mm, Unladen weight: 3.460Kg, Payload approx.420Kg, wheelbase:4.325mm etc. Errors and omissions excepted. Sale only to traders and export. !!!! Fg-1970 !!!! Key no.82 !!!!!

Condition: good (used), Year of construction: 2000, SANJO PO3-350 / Offset Labelpreess We present this SANJO PO3 Offset Labelpress max format 254mm x 330mm / year of manufacture 2000 Machine details:  Year of construction: 2000 Prodpfx Adsu I Nu Sonjd  Printing process: 6 x Offfset (Toray)  FLEXO VARNISH UNIT  unwind unit  CORONA DISCHARGE UNIT  2 x HOTSTAMPING UNIT  1 x AIR COOLING DEVICE  UV AIR COOLED UV UNITS  FLATBED DIE CUTTING STATION  SANJO REWINDER with SPOR VARNISHER  MULTIPASS UNIT  High Speed modification has been included Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)