Single Edgebanders

SCM OLIMPIC SE 215

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor 4 knife shaft Godjndhdtopfx Agbsbg Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate

Condition: good (used), Gabbiani SA 300 multi-saw Godpjhcwrkefx Agbsbg - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: used, Working width 1350 mm Number of sanding units 2 st. Gsdpfjrmucxex Agbsbg Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Gbjdpexymd Tjfx Agbeg Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm Gedpfxec Tmygo Agbsbg work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz Gedpfswyu Rwox Agbebg - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm Gedpfxjw Nbacs Agbebg

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: Gbsdjgp Diaepfx Agbog a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Gbedpfx Agjw Tivgebog Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Gbsdpfxovqbh Ej Agbsg