Veneer press OTT JU 60-S

Ott Junior JU 60 S

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley Isdpfxsxnvq Ee Ag Ieib • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Iiedpfx Asxy Tmnjg Ijb

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. Iijdpfevu Um Nex Ag Iob 📌 Key features: ✔ Precise cutting of laminated beams ✔ Automatic control for increased efficiency ✔ Robust and reliable construction

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Gas filling press: Models and triple available Isdowikn Rspfx Ag Ijib

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Iiodsuy Sazjpfx Ag Ieb Throat 276 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, SELECT 20800 step milling machine for recessing treads and risers into stair stringers and posts. The machine features stops for tread length, tread thickness, riser length, riser thickness, and projection dimension. In a single clamping, one tread and one riser can be milled in approximately 1 minute. Clamping the workpiece takes just one second. This machine is the ideal solution for professional staircase manufacturers. Voltage: 3-phase, 400 V. Maximum clamping height: 300 mm. Iiedpfxowut Abj Ag Isb

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm Iedpfx Ageq Rb Irs Ijib with rear fence

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Iisdsu Damdspfx Ag Ieb

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Isdpfxeqpdkce Ag Isib

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm Iiodpfowpm I Hsx Ag Iob - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach