Four-side moulder Weinig Unimat 23 E

Weinig Unimat 23 E

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) Njdpfoxz Hh Ujx Acboct ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Year of construction: 1998, condition: ready for operation (used), A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible. Ncjdpfx Aswv Umwscbjt

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 2.500 mm Ncedpfxsv Ec Nts Acbet Feed motor 5,5 kW

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 86573, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, rotational speed (min.): 6,000 rpm, number of spindles: 6, Spindles: 6 Working width: 230 mm Working height: 160 mm Spindle 1: Bottom (4.0 kW) Ncjdpjy Rrgksfx Acbet Spindle 2: Top (4.0 kW) Spindle 3: Right (7.5 kW) Spindle 4: Left (7.5 kW) Spindle 5: Top kW Spindle 6: Bottom kW

Condition: used, Year of construction: 2024, operating hours: 69 h, machine/vehicle number: PB14740, fuel type: hybrid, Weights Empty weight: 2.430 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.760 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 920 m Transport dimensions (LxWxH): 5.21x0.79x1.95 Nodpfeu Rl Adsx Acboct Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Ncodpfx Aoxg Sa Hscbst One driven roller at the outfeed table.

Condition: used, Year of construction: 2001, functionality: fully functional, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, – German-made – Year of manufacture: 2001 – Total power: 42 kW – Driven rollers in the table TECHNICAL SPECIFICATIONS: – Planing width: 230 mm – Planing height: 170 mm – Electric height adjustment – Spindle diameter: 40 mm – 1st (bottom) spindle: 7.5 kW – 2nd (left) spindle: 11 kW Ncedpow H Smhofx Acbjt – 3rd (right) spindle – 4th (top) spindle: 11 kW – 5th (bottom) spindle: 5.5 kW – Continuously variable feed speed: 6–38 m/min – Feed motor power: 4 kW – Infeed table length: 1000 mm – Electric brakes – 5 driven top steel rollers – 1 driven top rubber roller – 2 driven table rollers: one is toothed – Air cushion in the table – Pneumatic pressure system – Feed via cardan shafts – Outlet diameter: 5 x 140 mm – Centralized table lubrication system – Machine dimensions (L/W/H): 390 / 210 / 230 cm – Weight approx. 4000 kg

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m Ncodpfxovbtpj Acbst -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: used, Technical specifications: Maximum planing width: 240 mm Maximum planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle configuration: bottom 5.5 kW right/left 7.5 kW top 5.5 kW top 5.5 kW bottom 5.5 kW universal 5.5 kW 1/4/5/6 spindles on separate motors 2/3 on a single motor Ribbed worktables Ribbed rollers in the table: 2 Upper steel feed rollers: 5 Upper rubber feed rollers: 3 Extraction port diameter: 6 x 140 mm Infinitely variable feed rate Feed drive on cardan shafts Lubrication pump for worktable 2 smooth rollers in the table Pressure: 6 atm. Ncedpfx Acjycu R Isbet Electric elevation of machine body Power supply: 400 V Total power: 32 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Njdpfx Acju Damdebjct

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port Ncodpfx Acjx Nrvvobet - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Year of construction: 1997, condition: excellent (used), max width of the workpiece 23cm max height of the workpiece 18cm 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 top horizontal spindle heads adjustable up / down, right / left spindle diameter 40mm Njdpfx Acjk Dxrasbjct Hydraulic side feed on the feeding table