Magnetic drill

NITTO KOHKI Co. AS 30

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 air compressor Iodpfxoiywpzo Afujba 3.7 m3/min Operating hours: 2,371 hours Deutz engine Type: diesel

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Ibsdow Hx Rzspfx Afuoa Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm Ibsdpju Nwl Uofx Afuoa voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Iedotqf Rzjpfx Afujba Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Isdpfeur H I Nex Afusba Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV Iodpfxefc R D Ae Afusba - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, loading space volume: 35,000 m³, tire size: 385 /65 R22,5, Year of construction: 2026, operation weight: 60,000 kg, chassis manufacturer: Lider, Equipment: ABS, 4 Axles Heavy-Duty Tipper. Ijdorcb N Eepfx Afusba Lider Trailer for Heavy-Duty Trailers. High Quality and Durability Manufacturing. EU Standards. One-year Warranty for Manufacturing Defects. EBS or Double Line Brake Systems. Customer Requested Color. 2026 Production

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch Ibodpfsdzqb Esx Afuea - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 2007, overall grade 1-5 (1 bad, 5 like new): 4/5 certificates: CE, TÜV Aichi rm04b Year 2007 Hours low Working height 6 m Weight 650kg 0.78 x 1.30m working height: 600 cm Type: Electric Total weight gvw: 650 kg Maximum lifting capacity: 200 kg Type of drive: Caterpillar drive Maximum lifting height: 600 cm Production country: Japan Urenstand: Laag Werkhoogte: 6 meter Gewicht: 650 kilogram Ibjdpfsxbr U Hsx Afuea LxB: 0.78 x 1.30m Certificaten: CE, TÜV

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Ibsdspr Uvrepfx Afuoa