Diesel generator
ETT 55E

Year of construction

2016

Condition

Used (limited functionality)

Location

Vilnius

Machine data

Machine type:: Diesel generator

Manufacturer:: ETT

Model:: 55E

Year of construction:: 2016

Condition:: repair required (used)

Functionality:: limited functionality

Operating hours:: 90 h

Price & Location

Location:: Vilnius, Lietuva

Call

Technical details

Fuel type:: diesel

Power:: 44 kW (59.82 HP)

Nominal power:: 44 kW (59.82 HP)

Continuous power:: 44 kW (59.82 HP)

Continuous power (apparent):: 55 kVA

Details about the offer

Listing ID:: A20229280

Update:: 07.10.2025

Description

Diesel Generator ETT-55E (55 kVA) for Sale

Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer.
Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey.

Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use.

Technical specifications:

Model: ETT-55E
Operating hours: 90 h
Output (Standby): 55 kVA / 44 kW
Output (Prime): 50 kVA / 40 kW
Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled)
Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR)
Voltage / Frequency: 400 / 230 V – 50 Hz
Current: 79 A
Power factor (cosφ): 0.8
RPM: 1500 rpm
Cooling: Water
Fuel consumption: ~10 L/h (at 100% load)
Fuel tank capacity: 260 L (up to 8 hours continuous operation)
Dimensions (LxWxH): 2250 × 1000 × 1500 mm
Weight: 1100 kg
Year of manufacture: 2016
Country of origin: Turkey
Fodpfx Aloxlngaobjgg

Controls and features:

Automatic DATKOM DKG309 control module
Emergency stop button
Fuel level, oil pressure, temperature, and voltage sensors
Battery charging system
Automatic transfer switch (ATS) for mains/generator control
Overvoltage, overload, and low oil pressure protection
Soundproof enclosure – reduced noise levels
Manual or automatic operating mode

Typical applications:

Suitable for:
- Industrial facilities, warehouses, production plants
- Construction sites and mobile workplaces
- Backup power for hotels, hospitals, office buildings, or farms
A reliable solution for stable and uninterrupted power supply.

Feel free to contact us if you have any further questions.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

84 listings online

Call

Send inquiry

Telephone & Fax

+370 5 20... show

These listings may also fit your interest.

Listing

Germany

18,634 km

Eroding machine
MAKINOU6 H.E.A.T.

Call

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Fodpsy I Ak Iofx Albogg Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

See details

Listing

Root

18,756 km

Power generator
DETROITDiesel 320 KW

Call

Listing

Schwanberg

18,287 km

Fan
ScheuchVMB 63 0400

Call

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed 2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Fodpfxoh Tfqho Albegg • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

See details

Listing

Roll Moulders - Plants Werner Pfleiderer Miniroll

Nijverdal

18,487 km

Roll Moulders - Plants
Werner PfleidererMiniroll

Call

Condition: ready for operation (used), Year of construction: 2023, WP Miniroll compact roll line with high capacity and maximum flexibility. The Werner & Pfleiderer MiniRoll Roll Line is a highly compact and efficient solution for the production of premium-quality small bakery products. Thanks to the integrated Multimatic dividing technology and built-in drum round moulder, this line delivers consistent product quality, excellent hygiene and impressive output – all within a minimal footprint. year of build 2023 only 51 working hours! suited for the production of: • Long-rolled rolls Fsdpfox Thvmox Albogg • Round rolls 5-row configuration with 600 mm working width Integrated Multimatic Pro G 2 dividing head, up to 150 gram Dividing range from 55 g to 150 g, measuring piston 55 mm Hourly capacity pieces/hour 3000 Built-in dividing and rolling head Motorized weight adjustment for consistent product results Manual pressure adjustment for precise shaping control Adjustable moulding belt and length-forming unit with pressure plate Resting time of 6 minutes Suitable for trays 600×400, 600×800 and 580×980 mm Integrated storage for up to 3 rolling drums Automatic cleaning positioning Router for remote access

See details

Listing

Biscuit machine KALMIJER KEKS MASCHINE KS 70

Bad Lippspringe

18,427 km

Biscuit machine
KALMIJER KEKS MASCHINEKS 70

Call

Condition: used, Year of construction: 2009, functionality: fully functional, Kalmijer KGM biscuit machine with 2 biscuit rollers: Spekulatius and Kipfel. Comes with 10 baking trays. The machine has been overhauled. Stainless steel frame on castors. Equipped with heating for the rollers. Tray width: 25 cm; tray lengths: 1 m, 80 cm, and 60 cm. 16A connection. If you have any further questions, please contact us. Thank you in advance! Fgjdsw T Rxcjpfx Albjg

See details

Listing

CNC Lathe c-axis MAZAK QUICKTURN 250-IIM Mazak QUICKTURN NEXUS 250-IIM

Babberich

18,541 km

CNC Lathe c-axis MAZAK QUICKTURN 250-IIM
MazakQUICKTURN NEXUS 250-IIM

Call

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Fgodpjyz Stlofx Albog Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Mierlo

18,605 km

Drill grinder
RogiDG-13

Call

Condition: new, type of input current: DC, total width: 370 mm, total length: 180 mm, total height: 190 mm, input voltage: 230 V, rotational speed (max.): 5,300 rpm, overall weight: 10 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.18 kW (0.24 HP), grinding diameter: 13 mm, Sharpening of drills with a diameter of 2 mm to 13 mm Adjustable angle: 90 and 135 degrees Grinding speed: 5300 rpm Grinding wheel: CBN 200 Motor: 230V/1Ph/180W Fsdjga T D Tjpfx Albegg Weight: 10 kg

See details

Listing

Office copier Konica Minolta refurbished C250i/300i

Nagytarcsa

17,966 km

Office copier
Konica Minoltarefurbished C250i/300i

Call

Condition: refurbished (used), Year of construction: 2026, We thoroughly refurbish all machines that arrive in our warehouse, ensuring that our customers receive devices that are virtually like new with almost zero print count. Each machine is carefully inspected, cleaned, and restored so that it performs reliably and also looks excellent. The refurbishment process Complete disassembly: Every machine is fully taken apart down to the frame, allowing each component to be individually inspected and serviced. Deep cleaning: We clean each device in great detail, removing all dust, dirt, and residues from even the smallest parts. Consumables refurbishment: All consumables and wear parts are refurbished regardless of their condition to ensure long-term reliability. Fedpoy R D Hpofx Albegg Housing replacement: Scratched, broken, or discolored casing elements are replaced with parts in excellent condition. Secure packaging: Finally, the machines are wrapped in protective film and shipped in boxes to ensure they arrive safely and without damage. By the end of the process, the machine is restored to a condition that is as close to new as possible, both in appearance and performance.

See details

Listing

Sodick SL400G (2015) wire cutter (only 4.355 hours!) Sodick SL400G

Trenčianske Stankovce

18,022 km

Sodick SL400G (2015) wire cutter (only 4.355 hours!)
SodickSL400G

Call

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Fsdpfx Aeyu Nqmelbogg Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

See details

Listing

Płachty

17,695 km

Traub TNL26K
TraubTNL26K

Call

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Fedpevldx Aefx Albogg Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

See details

Advertise here

Diesel generatorETT 55E

Machine data

Price & Location

Technical details

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Diesel generator
ETT 55E