Used Wiring Diagram for sale (3,400)

Condition: like new (used), Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total length: 2,600 mm, total width: 2,340 mm, GF Machining Solutions CUT P550 Pro Year of manufacture: 2022 Uniqua Control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Integrated Collision Protection (ICP) on all 5 axes Cutting speed of 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.10 to 0.33 mm (with WIRE100 option) Iodjxl Suujpfx Afioih Including Taper Expert option for 0.25 mm wire Including AC-Setup 3D option Including wire chopper option Including horizontal manual annealing option Including automatic central lubrication option Including active thermal stabilization option Including SparkTrack option Including iWire option Including kit for 0.10 mm wire Overall system dimensions: 2,600 x 2,600 x 2,340 mm Total system weight: 3,300 kg The machine will be cleaned, serviced, and fully tested for all functions by us upon order placement. You will receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 Iodexl Nfqepfx Afijih C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator Iodpfocvkaljx Afieih The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Ijdpfjwl Ea Tjx Afijih Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1974 Iiedpfx Aoxnytqofieh diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Iisdpfjxnx Itox Afioh Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: excellent (used), functionality: fully functional, mileage: 33,400 km, power: 100 kW (135.96 HP), fuel type: gasoline, first registration: 07/2024, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2024, machine/vehicle number: 27188, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Inquiry number 27188 Highlights 1 owner, full service history Technology & Safety ESP, ABS, traction control, deactivatable front passenger airbag, front passenger airbag, side airbags, diesel particulate filter, start/stop system, power steering, automatic door locking, Power KeyFree start function, intelligent acceleration control, 2.0 L - 100 kW EcoBlue catalytic engine Multimedia USB interface, voice control Assistance systems Drowsiness warning, hill start assist, parking aid, rain sensor-equipped wipers, emergency call system, FordPass Connect incl. eCall, emergency brake assist (rear), emergency brake assist, wrong-way driver alert function Interior Automatic climate control, multifunction steering wheel, electric windows, onboard computer, leather steering wheel, adjustable steering wheel, multifunctional cargo floor (aluminum floor with 8 lashing rails, wood covering), metal cargo partition, recirculation heating system, lockable glove compartment Ijdpfxsw Uiice Afieih Seats & Upholstery Heated driver and front passenger seats, driver's seat armrest, driver's seat with lumbar support, height-adjustable driver’s seat, front double passenger seat Exterior Central locking with remote control, electrically adjustable and heated exterior mirrors, electrical trailer hitch preparation (socket and wiring), slightly tinted heat-insulating glazing Headlights & Lighting Turn indicators integrated into the exterior mirrors Wheels & Tires Tire pressure monitoring system, full-size spare wheel, 6.5x16 steel wheels Packages Express Line Package, Technology Package 5 Miscellaneous Sliding door right-hand side (cargo/passenger area), rear mud flaps, catalytic converter, front mud flaps, side lashing rails in load compartment, Trend, electric parking brake, partially painted bumpers, solid cargo partition (no window), LED cargo area light, 12V socket in the cargo/passenger area, A-pillar grab handle, 3100 mm wheelbase, second foldable remote key, 2-stage door unlocking incl. slam locking, rear wing doors (90° opening angle), Seat Package 16A: driver’s seat (4-way adjustable), front double passenger seat (4-way adjustable), seat heating, fabric, truck approval Former manufacturer’s RRP: 60,892 Euros Subject to alterations, prior sale, and errors!

Year of construction: 2010, condition: used, DFE Meincke is known for its expertise in industrial baking equipment, particularly in the area of biscuit forming machines and ovens. Here are some general details about these products: - Biscuit Forming Machines: - Designed for high-speed production of various types of biscuits. - Capable of producing different shapes and sizes with adjustable settings. Iisdpfxjxazlxo Afish - Often equipped with advanced technology to ensure consistent quality and minimal waste. - Can handle various dough types and formulations. - Ovens: - Specifically designed for baking biscuits at optimal temperatures and humidity levels. - Includes different types of ovens, such as convection, rotary, and tunnel ovens. - Feature energy-efficient designs and advanced control systems for better baking performance. - Can be integrated with forming machines for a complete production line. Peerless USA Bakery Mixing Machines: - Usage: Designed for mixing doughs and batters for various baked products such as bread, cakes, cookies, and pastries. - Types: They offer a variety of mixers, including planetary mixers, spiral mixers, and horizontal mixers, catering to different mixing needs. - Features: Common features may include variable speed settings, durable construction, and easy-to-clean designs. Some models might include programmable controls for consistent mixing results. - Applications: Peerless mixers are suitable for commercial bakeries, restaurants, and catering services, helping to improve efficiency and consistency in dough preparation. Line Capacity: 800 kg/h Biscuit Types: Sandwich type biscuit with filling Make: DFE Meincke Model : Turbu 3 Convection Oven Year of manufacture: 2009 Serial Number for Oven : 112988 Voltage: 3 x 380 V Oven Baking surface type: Wire mesh Current Icp: 6KA Current In: 140 A Made in: Denmark Mixer Manufactire: Peerless Year of manufacture of Mixer : 2010 Condition: Excellent Serial Number of Mixer: 209110 Former Manufacture: DFE Meincke Former Year of Manufacture: 2010 Controls: Siemens Type of biscuit: Sandwich type with filling Former Made in: Denmark Construction of Line: Stainless steel Available: Immediately Required Containers: 6-7 40ft

Year of construction: 1986, condition: excellent (used), Manufacturer: KONE Hint: MK10L1 Year of manufacture: 1986 Span: 9.3m Payload: 4t Lifting height: 6.3 m Wired remote control Net weight: 2550 kg Isdpfx Afjumt Ireieih More sizes in the photos.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-press 860 plus Year of manufacture: 2009 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Fill opening dimensions: 120 cm x 65 cm x 85 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Isdpjxnxmvsfx Afioih

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm Iisdpfsxnyrtex Afieh shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test the machine under power. The price is ex works, without disassembly. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 Model: MV4800 Operating hours: approx. 7,166 hrs Application type: EDM wire cutting Machine type: Wire EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Iodpfx Ajxnxmcsfioih Diameter over carriage: 1,020 mm Workpiece diameter: 505 mm Max. table load: 3,000 kg Worktable Outer length: 1,080 mm Outer width: 780 mm Price significantly reduced.

Condition: excellent (used), functionality: fully functional, mileage: 45,700 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,050 kg, first registration: 12/2022, emission class: euro6, color: white, number of seats: 2, number of previous owners: 1, Year of construction: 2022, machine/vehicle number: 59491, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, soot filter, traction control, truck registration, Inquiry number 59491 Highlights 1st owner, full service history Iiedsxbtbujpfx Afijh Technology & Safety ESP, ABS, ASR, driver’s airbag, passenger airbag, outside temperature display, power steering, adaptive brake lights, active brake assist, engine 2.0 L – 100 kW CDI CAT Multimedia Two-way speakers (front), communication module (LTE) for digital services Assistance Systems Attention Assist (drowsiness detection sensor), cruise control with speed limit function 210 km/h, Hill Start Assist, Parktronic System (PTS), wipers with rain sensor, brake assist, automatic headlight activation, Mercedes-Benz emergency call system Interior Multifunction steering wheel incl. trip computer, electric windows (2x), leather steering wheel, steering column adjustable (mechanically), window pillar trim, front cup holders, lockable glove compartment Seats & Upholstery Passenger seat adjustable Exterior Central locking with remote control, 3-button remote for central locking, electrically adjustable and heated exterior mirrors (both sides), trailer coupling: wiring for trailer socket, heat insulating glazing, mounting rails for roof rack Headlights & Lights Fog lights, daytime running lights, rear fog light Wheels & Tyres Steel rims 6.5x16 Packages Parking Package, BlueEfficiency Package, Driver Assistance Package Errors and prior sale excepted.

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Iedpfx Asizr Rlefioih Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Ijdpfxefl Iqus Afijih Outdoor unit 4x8 kw heating wire 32kW 160 ° C max

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinker KC 8060/650 Universal Year of construction: 2014 Dimensions: approx. 3550 x 1350 x 1450 mm (LxWxH) Weight: approx. net 690 kg / gross 790 kg Technical data: Sealing frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase current Iodpfxexl Dqzj Afioih Easy-to-operate angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with Teflonized cut-off welding wire for absolutely odorless operation. Equipped with locking mechanism as automatic pressure mechanism for precise adherence to the set welding time and for easy for problem-free cut-off welding even of thick films. Viewings and demonstrations are possible on our premises by prior arrangement. Function guarantee, no warranty

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Machinetype: wire nail press Make: WAFIOS Type: N41 Constr. year: 1987 diameter range: 1,8-3,4 mm nail length: 13-80 mm output - pieces/min: 550 Iijdpexnykpefx Afioh Location: In our warehouse

Condition: excellent (used), Chamber in very good condition Binder climate chambers are used to test material behavior under constant humidity and temperature conditions. These devices operate within a temperature range from 0°C to 70°C and a humidity range from 10% to 80% relative humidity. The distinguishing feature of the Binder KBF series is absolutely reliable stability testing and precise maintenance of constant climate conditions. Accurate climatic control makes these chambers ideal for stability testing. The climate chamber is based on a modular design, and the interior is lined with stainless steel for easy cleaning. Iiedpfx Aexnw Eqofieh Thanks to the APT.line™ preheating technology, the circulation of air throughout the usable volume is smooth and even. Humidity levels can be precisely regulated and fully adapted to specific requirements. Key features: - Temperature range: 0°C to 70°C - Humidity range: 10% to 80% relative humidity - APT.line™ preheating chamber technology - Humidity control with a capacitive humidity sensor and steam humidification - Airtight inner doors made of safety glass (ESG) - Corrosion prevention on the glass with special TIMELESS coating - Interior chamber made entirely of stainless steel - 2 stainless steel wire shelves - 30 mm access port with silicone plug, left side - 4 robust castors, two with brakes, from 240 L capacity upwards

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible. Ijdjwr Utijpfx Afijih

Condition: used, functionality: fully functional, machine/vehicle number: D08E/8404, Offer Number: D08E/8404 Machinetype: straightening and cutting machine Info: overhauled Make: WAFIOS Type: R5 Iedpjxnykcofx Afisih Constr. year: diameter range: 6-14 mm cutting length: 6000 mm speed - meters/min: 23 - 90 Location: Europe

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Iodpfx Afewk Rlxeieih Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8410, Offer Number: D32L/8410 Iisdpfxjxnyi Ee Afish Machinetype: spring coiling machine Make: WAFIOS Type: FS3 Constr. year: wire diameter: 0,2-1,8 mm spring diameter: 35 mm feeding length: 1.500 mm feed length: Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8405, Offer Number: D32L/8405 Machinetype: spring coiling machine Make: WAFIOS Type: ZO1 Constr. year: wire diameter: 0,1-0,5 mm spring diameter: 1-5 mm feeding length: 1000 mm output - pieces/min: 70 Iodpfx Afjxnyixeisih Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8411, Offer Number: D32L/8411 Machinetype: spring coiling machine Make: WAFIOS Type: FS2 Constr. year: wire diameter: 0,2-0,9 mm spring diameter: 1 - 20 mm feeding length: 4 - 1280 mm output pieces/min: 11 - 420 Location: In our warehouse Iedpfx Afoxnyifjisih

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D56L/8403, Offer Number: D56L/8403 Machinetype: packing machine Iijdpfxjxnyh Io Afijh Make: WEIGHPACK Type: Constr. year: 1994 working range: Location: In our warehouse