Used Felder Bf6-31 for sale (132)

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Cjdpeyzdnbsfx Aiisri Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Cedpfxsxlt Shj Aiiori Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: used, Year of construction: 2023, Felder Format 4 Profit H80 21.31 Machining Centre. Serial No TBA (2023), F4 Integrate Control, Working Area 3090 x 2100 x 85mm, Travel X/Y/Z = 3860/3500/225mm, 500m3/h Vacuum Table, Main Spindle 10kW, HSK F63 at 1000 – 24000rpm, 15 Position Toolchanger, Length Measurement Tool, Hand Held Remote Control, Loading/Unloading Tables, Upper Table Extraction, Light Guards Location: This lot is located in Gateshead, Tyne & Wear, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Csdpfxo Ah Etye Aiiori Lot 1 of Auction 3516

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Csdpozq Dcuofx Aiisri Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Cjdpfx Aow Hcygsiieri Reference: R-A0117

Condition: like new (used), CNC machining center profit H80 21.31 Working area: Cjdpfjz A Dwyex Aiieri X 3090, Y 2100, Z 85mm X and Y axis speed - 25m/min, Z axis - 15m/min 10KW milling spindle, HSK - F63 Spindle cooling: air Linear tool changer - 15 positions Drilling head with 8 spindles, 6 in the X axis, 2 in the Y axis 2 vacuum pumps with a suction capacity of 500m3/h Condition: excellent for a used machine Only 125 operating hours

Condition: as good as new (ex-display), Code: N0249 Brand: HAMMER - FELDER - AUSTRIA Model: C 3 31 - CE Standard Universal 5-works combined machine - CE Standard Planer width 310 mm Table length 1400 mm Cjdpszqgduefx Aiiori Helical planer spindle “Sylent Power” with reversible blades Thickness height 225 mm Circular saw unit tiltable 0-45° Cutting height 103 mm Scoring unit Aluminium carriage 2000 mm Spindle moulder unit diameter 30 mm – 4 speeds Motor power 4 Hp

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Crodpfx Aisxzppbjioi Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: excellent (used), Felder D 951 – Thickness planer, 500 mm planing width Crjdpfxj Aa Avie Aiioi Manufacturer: Felder Model / Type: D 951 Year of manufacture: 2011 Technical data and equipment * Planing width: approx. 500 mm * Planing height: approx. 250 mm * Motor power: 5.5 kW * Number of planing knives: 4 * Infinitely variable feed rate adjustment * Feed rate: 4–16 m/min

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom Cjdpfx Aj Ahmv Asiiori • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 105 mm, cutting width (max.): 900 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, saw blade bore: 30 mm, total length: 2,000 mm, overall weight: 450 kg, Panel saw FELDER, model K700, year of manufacture 2005, with scoring saw and tilting saw blade. Sliding table 2000 mm, condition: almost new. Cjdpfx Ae Ah Iazeiieri

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Codpfx Ajvw Ecteiijri Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 4 kW (5.44 HP), For sale is a Felder AD 741, a combination jointer and thickness planer manufactured in 2019. This machine is suitable for professional use in carpentry and woodworking shops. Crjdpfx Aj Ahqxwsiiei Technical data: - Manufacturer: Felder - Model: AD 741 - Year of manufacture: 2019 - Motor power: 4.0 kW - Connection: 400 V, 3 phases, 50 Hz - Current consumption: 8.6 A - Jointer table width: 410 mm - Thickness planer table width: 404 mm - Jointer table length: 2,000 mm - Thickness planing height: approx. 3–230 mm - Feed rate: 6 / 12 m/min - Max. material removal: approx. 4 mm - Weight: approx. 500 kg The Felder AD 741 allows switching between jointer and thickness planer functions. Please refer to the images for the exact equipment of the machine offered, in particular the cutterhead and any special accessories, or inquire if interested. Inspection is possible by arrangement.

Condition: used, Year of construction: 2020, Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2020 Technical data - Circular saw unit, 0 - 46° swivel, maintenance-free, - Maximum cutting height 200mm, under-table dust extraction - Upper guard, cutting width 1000mm, hood for 90° cuts and hood for angled cuts, height-adjustable and can be swiveled away - Dust extraction connection 100mm - Circular saw table extension up to 1200mm behind the saw axis - Parallel fence with fine adjustment, fence ruler length 1200mm, can be swiveled - Crosscut fence 3200mm, swivels 90-45° - Kappa 550 control unit with programmable angle and height positioning, cutting height correction during swiveling - Machine stand Kappa 550, circular saw table 1180x610mm Cedpfx Ae Ah E Rzjiijri - Electrical system Kappa 550, 2x400V 50Hz CE, 10 kW S6 with star-delta starter - 3 speeds 3000/4000/5000 rpm. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, machine/vehicle number: 604.11.059.19, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 200 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, total length: 3,200 mm, total width: 450 mm, total height: 1,200 mm, overall weight: 1,200 kg, table height: 1,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Felder Kappa 550 circular saw, 0-45 degree swivel, maintenance-free, saw blade D=250mm-550mm Cjdpfx Aij Ad Itueieri Extension arm 1250mm x 650mm, cutting length 3200mm, crosscut function. Kappa 550X - motion control with LCD screen with touch function...etc. Circular saw table extension 1620mm Additional light, scoring unit, red LED strip marks the danger area. Scoring unit Control with 3 controlled axes. Cutting width 1250mm, aluminum, anodized. Controlled parallel fence 1250mm Sliding table 3200mm Rip fence 3200mm with 2 fence blocks, digital The machine was used in a two-person business and has hardly been used for the past 2 years. The saw was only used for fine work (not for carpentry). Selling due to retirement. If interested, please request more information.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Crodozuywijpfx Aiiei Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 22.07.003.23, power: 11.5 kW (15.64 HP), overall weight: 3,490 kg, Equipment: saw blade guard, Felder Format 4 KA3232C Machine Number 22.07.003.23 Year of Construction 2023 Cutting length 3.200 mm Pusher stroke 3.200 mm Number of grippers 6 Feedrate max 40 m/min Continuously variable feed Saw blade projection 67 mm Saw blade diameter max 320 mm Main motor power 7,5 kW Scoring saw Yes For sensible workpiecesClamping pressure adjustable Crodpfs Ahumpsx Aiioi Stop side Left Control Touchscreen CE mark Total connection 11,5 kW Weight 3.490 kg Space requirement Length 6,47 m Space requirement Width 5,3 m Space requirement Height 1,8 m

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz - Phase (Ph): 3.0 - Power (kW): 15.0 kW - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm Credpfxjz Nwa Ne Aiiei

Condition: used, Year of construction: 2018, functionality: fully functional, Felder A 951L planer/jointer Year of manufacture: 2018 From an insolvency, therefore no further technical data available. Please submit a bid. Location: Freising Inspection is welcome. Sale to the highest bidder. Csdpj Aaz I Rsfx Aiijri We have other used machines available. Simply contact us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. Cedpfozy Hdaox Aiiori The machine was purchased and was unused.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, FELDER FD21 Pro – Manufactured in 2024, in top condition Equipment: Credez Abu Ejpfx Aiiji * 21 drilling spindles including a quick-change system * 8mm drill bits * Precise adjustment options via rotary dials * Robust and high-quality construction * Display for width adjustment (self-built) * Cross rails for series drilling If you are interested or have any questions, please feel free to contact us. Viewing is possible by appointment. For sale due to a change in machinery.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm Crsdpfoztxt Hex Aiisi - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: ready for operation (used), Year of construction: 2024, machine/vehicle number: 305.12.001.24, functionality: fully functional, input voltage: 400 V, input current: 43 A, input frequency: 50 Hz, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, number of slots in tool magazine: 8, Equipment: CE marking, documentation/manual, For sale: CNC machining center PROFIT H08 13.25, year 2024. Technical specifications: Axis travel: X = 3260 mm Y = 1630 mm Crsdpfs Adnqyox Aiisi Z = 225 mm Working area: X = 2500 mm Y = 1250 mm Z = 85 mm Equipment: Matrix work table Limit stops around the working area Guidance system in the X, Y, and Z axes Automatic central lubrication Efficient vacuum system (180 m³/h) 10 kW HSK F63 electro-spindle DH8 drilling head 8-position tool magazine (side-mounted, on the machine body) Control terminal for machine operation Control cabinet Safety system compliant with CE declaration.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Csdpfx Aie Abrzqoiori Polishing unit Year of manufacture: 2013

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Crodpfjz R R Ttjx Aiioi I am offering for sale a Felder F900Z Z vertical spindle milling machine. The machine is in VERY GOOD CONDITION – it has been used sparingly. It is robust and ideal for precise wood processing. Its condition can be seen in the photos; it is ready for use and has no hidden defects. Please contact me.