Used Wiring Diagram for sale (3,277)

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,245 mm, total length: 3,445 mm, total width: 2,595 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, overall weight: 3,684 kg, Equipment: documentation/manual, We are offering this Sodick VN 600Q wire EDM machine, year of manufacture 2024. Manufacturer: Sodick Model: VN 600Q Year: 2024 Condition: like new The machine currently has 1,137 hours of cutting time and approx. 2,200 operating hours. • 10-year warranty on positioning accuracy • Linear motors (X, Y, U, V axes) • Absolute linear glass scales (X, Y, U, V axes) • Ceramic components • LN3W generator • Remote control • Enhanced operator-friendliness Blsdpfsytr Nvsx Ak Eeg • Energy-saving circuit • Automatic water level control • Fixed Jet AWT with pop-up function • Heart NC software • Wire end remover • Dielectric cooling unit • Voltage stabilizer • LAN interface • USB port Further specifications for this machine: Travel (X/Y/Z axis, mm): 600 x 400 x 310 Travel (U/V axis, mm): 90 x 90 Max. workpiece weight (kg): 850 Table height from floor (mm): 1,000 Machine dimensions (W x D x H, mm): 2,595 x 3,445 x 2,245 Machine weight (kg): 3,684 Air pressure: 0.65 MPa, 30 NL/min Total power consumption: 11.5 kVA, 3 phase, 50/60 Hz Taper angle: ±15° (workpiece thickness: 120 mm) Wire diameter (mm): ø 0.1 ~ ø 0.3 mm Wire tension (N): 3 ~ 23 N Category ID: 1896 Type ID: 2593 Machine type: Wire EDM machine If you have any questions or require further information, feel free to send us a message or call us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, For sale: Mitsubishi FA20S wire EDM. For all information, please contact us via email or phone. Additionally, we have several spare parts available for a Mitsubishi FX20, year 2000. Blsdpfxox Rprqs Ak Esg

Condition: good (used), Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor Bsdpfx Ajrgbu Hjk Eolg -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.

Condition: used, Load capacity: 1000 kg Bjdpfx Ajyk U Nmsk Eelg Lifting height: 12 m

Condition: used, Year of construction: 2000, Wire erosion / EDM Travel distance X: 520 mm Travel distance Y :370 mm Travel distance Z: 310 mm Bodsyk H Egepfx Ak Eolg max. workpiece size X: 790 mm max. workpiece size Y: 730 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 / 120 mm generator: 45 Ampere submerged cooling unit Perfect for precise EDM applications.

Condition: ready for operation (used), functionality: fully functional, For sale: 1 set Kemppi FastMig MXF 67 – High-performance wire feeder for welding systems Info: The Kemppi FastMig MXF 67 is a robust 4-roll wire feeder for 300 mm spools, designed for demanding industrial MIG/MAG welding applications. It delivers 520 A (60% duty cycle) power, a wire feed speed of 0–25 m/min, features an impact-resistant dual-wall plastic housing, and is compatible with FastMig Pulse/Synergic/M power sources. Technical Data (Kemppi FastMig MXF 67): Product group/code: 1693685 (or 6152200) Blsdpfx Akoyrr S Io Ejg Wire spool diameter: max. 300 mm / 20 kg Feed speed: 0–25 m/min Wire feed mechanism: 4-roll (DuraTorque™) Power (60% duty cycle): 520 A Power (100% duty cycle): 440 A Wire dia. (Fe, Ss): 0.6–1.6 mm Wire dia. (Al): 1.0–2.4 mm Protection class: IP23S Dimensions: 590 x 230 x 430 mm​ Weight: approx. 11.1 kg Main Features: Housing: Extra-sturdy dual-wall plastic housing for tough industrial use. Compatibility: Suitable for FastMig M, Pulse, and KMS power sources. Options: Compatible with SuperSnake GT02S/SW for extended reach. Control panels: Compatible with MR 200/300 (Regular) or MS 200/300 (Synergic) panels. Functions: Provides precise wire feeding and is designed for torches with Euro central connector. The MXF 67 (Product code 6152200) is ideal for heavy-duty welding applications and can be used with suitable models such as the FastMig M. (23 more sets available). Inspection welcome near D-24983 Handewitt. Further info available on firm inquiry. Subject to errors and omissions.

Condition: used, offer consists of: stitching wire unwinder for 15kg roll without wire We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Blsdpfxsw Ewzvo Ak Ejg

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm Bsdpfx Aksin Rn Ae Eelg -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Blsdpfxjyknpge Ak Ejg Control: MARK 30 LN 1 W Wire threading: 97 Pipe AWT

Condition: refurbished (used), Year of construction: 1999, In Line WIRE DRAWERS RMG 45 Used and revised to new. Operational. Manufacturer: RMG Type: 45 Max. Ø (mm.): 8 Capstan Ø (mm.): 500 Max. Speed (m/min.): 36 Year: 1999 Available at H.B.R. srl - Italy Cheaper Price Bedpfx Akeyrdzno Eslg

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Bsdpfjw Svapsx Ak Eolg

Condition: used, Year of construction: 1994, EDM machine Charmilles Robofil 2020 and 4020, year of manufacture 1994 and 1996 Bjdpoyq R Tbjfx Ak Eelg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Bedpfx Akev Dkvrs Eelg Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up Bljdogzv Scepfx Ak Eog AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: excellent (used), Year of construction: 2013, workpiece weight (max.): 800 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, total height: 2,290 mm, total length: 2,720 mm, total width: 2,520 mm, type of input current: three-phase, overall weight: 3,850 kg, table length: 1,000 mm, input voltage: 220 V, tank capacity: 850 l, input frequency: 50 Hz, Equipment: documentation/manual, We offer the machine EXCETEK V650G in very good condition. Year of construction 2013. The machine has been in our ownership since the beginning. The machine has been serviced from authorized slovenian service company and we have all the service lists. The machine is placed in Zagreb, Croatia. PRICE = 23.800,00 EUR Bodpfx Ajyn Silsk Eolg Loading is included in price! Model number: V650G Serial number: MWI3650010 Assembly number: A0A2400601 Manufacturing date: 2013/06 Weight: 3850 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Bodpfexwmacex Ak Eolg Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator Blsdpjyir N Ujfx Ak Eog AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered on request.

Condition: used, Wire erosion FANUC ROBOCUT ALPHA-0iE Bedpfx Akoxqrqae Ejlg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Bsdpfxji A I Hfe Ak Eslg Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer Bledpjvvl Uaofx Ak Ejg 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals Blsdpfx Akjul Uwlj Esg

Condition: ready for operation (used), Lot of Well Ascent copper coil/winding wire Various widths and thicknesses: 0.274 x 2.070, Bsdpfx Akjym Amfj Eolg 0.190 x 2.760, 0.080 x 1.000, and more. Total of 25 reels Copper wire weight: ~115 kg (approximate) Manufacturer: Well Ascent

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Blodpfx Akjxvdmdj Eog

Condition: used, machine/vehicle number: 7160, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Bedjiiilmepfx Ak Ejlg Typ / Model 781/1Q50R Serial-No. 7160 Armlänge / Arm length 55cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19142, Wire Stiching Machine Polygraph 703 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bledpsh Axw Tofx Ak Eog Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test