Used Wire Cutting Machine for sale (67,903)

Condition: excellent (used), Year of construction: 2022, Ref: 11171 . 2022 IML S74/13 Pneumatic Corner Cutting Machine Cedpfx Abs Ah D Snjaohd Single-head pneumatic corner cutter for paper and board finishing, suitable for bookbinding and cover-making applications. Specification: Operation: Pneumatic Cutting thickness: 0–35 mm Cutting stroke: 50 mm Cutting angle: Dependent on fitted tooling Overall dimensions: 700 × 550 × 1,250 mm (L × D × H) Weight: Approximately 100 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Cedpfx Abo Agggysaohd Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Cedpfx Aboyxprtoajhd

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Chodpj Afnltofx Abasd Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm V-axis: 120 mm Cjdpfezrh N Uox Abashd Rapid traverse (X): 900 mm/min Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Max. workpiece weight: 250 kg Machine weight: approx. 1.5 t Connected load: 11 kVA Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet Csdpfx Aovvl Uaobaehd 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cooling unit, documentation/manual, FANUC Robocut α-C400iB 31i WB HMI Complete with RENISHAW part probe Hammer for removing swarf Spatula for collecting swarf Robot interface for unattended machining Chsdpj Ah T Rwefx Abaed Door with automatic (opening) descent • CNC Fanuc 31i-WB • Z-axis controlled by CNC • Wire driving unit with automatic threading AWF2 • 15” ‘touch screen’ display and portable keyboard • Automatic water level adjustment • Dielectric fluid filtration system • Fanuc cooling unit • Three-phase 380/220V 15 kVA transformer MANUALS TECHNICAL SPECIFICATIONS: Maximum workpiece size (mm)……………..……………730 x 630 x 250 Maximum workpiece weight (kg) ……………..………….500 Travel of X and Y axes (mm) ……………..……400x 300 Travel of Z axis (mm) ……………...…255 Travel of U and V axes (mm)…………….. ………..120 x 120 Maximum taper angle (°/mm)……………. 30°/80 Minimum incremental step of drives (mm)……………..……………..…0.0001 Wire diameter (mm)…………….……0.10/0.30 Maximum wire weight (kg)…………….……………..……………..……..16 Footprint (W/D) (mm)…………….……………..1930 x 2330 Machine weight (approx.) (kg)…………….…………….1800 Control…………….……………..FANUC 31i-WB Program memory size (MB)…………….……………...4 Generator AC ……………..standard Pulse generator ……………fully transistorized Maximum cutting speed …………….330 mm2/min (brass wire Ø 0.3 mm) Minimum surface roughness …………….Standard 0.3 Ra (OPTIONAL 0.1 RA for superfine finishing) Dielectric system ……………..……………Deionized water Tank capacity (liters)…………….……………..……………520 Filters ……………2 paper filters Machine weight …………….1800 kg FANUC Robocut α-CiB Series 31i WB Machine features High precision: New high-rigidity structure with thermal insulation. Symmetrical pyramid structure with a wide base to eliminate load overhang Lower guide support with thermally isolated arm Tank with hermetic pre-closure device (patented) Servo control of the water level in the working tank (follows the position of the Z-axis) Transparent sealing plate in two partitions for easy inspection and maintenance Economic efficiency: Long service life of wear parts Low operating costs Minimum footprint for installation Energy consumption monitoring User friendly: Numerical control of the latest generation FANUC 31i WB 15” ‘touch sensor’ LCD screen with Teach pendant USB I/O for data and programs System features to increase machining speed and precision New concept Skim Cutting Power Supply SF2 generator for finishing with Ra 0.3µm on tool steels with a thickness of up to 60 mm Patented AIP2 (artificial intelligence) discharge pulse control High-speed servo control (direct and not through the CNC) Machining of variable thickness shapes optimized thanks to AIP2 pulse control

Condition: ready for operation (used), Year of construction: 2018, Komax Wire Kappa 310 Automatic Cable Cutting and Stripping Machine Year of manufacture: 2018 Cable cross-section, stranded conductor: 0.02-6mm² Max. outer diameter: 10mm Length accuracy: ±(0.2%+1mm) Cable length range: 1mm-700000mm Max. cable transport speed: 4.0m/s Quantity range: 1-99999 Max. stripping lengths: Full stripping: Side 1: 100mm Side 2: 40mm Partial stripping: Side 1: 999.9mm Side 2: 999.9mm Multiple stripping: Side 1: 999.9mm Side 2: 999.9mm Dimensions: 465mm x 460mm x 385mm (W x D x H) Weight: approx. 25 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Csdpfx Ao Ah Rhmobaohd Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Chsdpjyvuuzsfx Abajd

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head Chedpfo Afm Hiox Abaod - High-pressure pump KMT SLVI 50 STD Maximum pressure: 3800 bar Power: 37.5 kW - Water treatment system - Silo and dosing system for abrasive sand - Slurry flushing and filter system

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 9-2105/331138, Equipment: cooling unit, documentation/manual, CHARMILLES ROBOFIL 290 Wire EDM Machine – 1999 Description: CHARMILLES ROBOFIL 290 CNC wire EDM machine, manufactured in 1999, designed for high-precision machining of conductive metal parts, including hardened steels, alloy steels, stainless steels, and carbides. General characteristics: - Brand: CHARMILLES Chsdo Agwbwepfx Abaed - Model: ROBOFIL 290 - Year: 1999 - Type: Wire EDM machine - Control: CNC - Axes: X, Y, Z, U, and V - Wire diameter: 0.25 mm - Technology: Wire EDM cutting in a dielectric bath Characteristic | Value X-axis travel | 400 mm Y-axis travel | 250 mm Z-axis travel | 200 mm U / V-axis travel | 80 / 80 mm Maximum part dimensions | 850 × 500 × 200 mm Maximum part weight | 500 kg Taper cutting angle | ±30° over 200 mm Admissible wire diameter | 0.10 to 0.30 mm Installed power | 10.5 kVA Power supply | 400 V, three-phase Machine dimensions (L × W × H) | 1,800 × 1,600 × 2,180 mm Net weight | Approximately 2,200 kg Equipment and features - CHARMILLES numerical control. - 2D profile machining and taper cutting. - Water filtration and deionization system. - Adjustment of voltage and wire speed. - Anti-collision protection for the axes. - USB communication interface Machine available for viewing by appointment in our workshop in Sprimont, Belgium. For further information or to arrange a visit, please do not hesitate to contact us.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: Chodpfxsz R Iq Uj Abaod – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: used, Year of construction: 2021, functionality: fully functional, sheet thickness (max.): 25 mm, working width: 1,500 mm, hose package length: 10,700 mm, working length: 3,000 mm, CNC Plasma Cutting System Swift-Cut Pro 3000 MK 5 – Complete Manufacturing Cell incl. Portal Crane & Hypertherm 105 SYNC Description For sale is a professional, fully functional, and immediately ready-to-use CNC plasma cutting system, type Swift-Cut Pro 3000 (MK 5). The system was acquired from the renowned specialist dealer Heidenbluth Schweißtechnik and set up as a well-thought-out, turnkey manufacturing cell. The machine is in operation, has few operating hours, and can be inspected and tested while powered on. Scope of Delivery & Technical Equipment Cedpj Ah Eu Eefx Abaehd • CNC Cutting Table: Swift-Cut Pro 3000 MK 5 with a working area of 1,500 mm x 3,000 mm. Equipped with a sectional extraction table, Soft-Sense height sensing, collision protection, and a robust steel frame with integrated forklift attachment. • Plasma Power Source: Hypertherm Powermax 105 SYNC (year of manufacture 04/2021) incl. CPC connection, voltage divider, and serial interface for precise cuts up to 25 mm sheet thickness. • Cutting Torch: Machine cutting torch Smart SYNC 180° (10.7 m). • Material Handling System (Portal Crane): Solid, custom-made steel crane frame including a heavy-duty trolley with chain hoist for ergonomic loading of large-format sheets. • Marking System: Integrated marking system PRO. • Exhaust & Compressed Air: Powerful exhaust fan set (radial fan with wall console) for long duct runs including approx. 20–25 m of flexible ducting. Integrated Camozzi compressed air maintenance unit and a water separator Dropout 600 A. • Control & Software: Industrial control console with touchscreen monitor, PC and LAN connection. Including full versions of SWIFT Wizard 3 (automatic nesting) and SWIFT Cam Wizard 3 (incl. 2nd license with dongle for an additional external workstation). • Accessories: Comprehensive set of wear parts (SYNC 45A to 105A, FineCut nozzles, electrodes and wear parts box). Sales and Delivery Conditions • Price: €28,500 (net) OBO (or best offer) • Location: Schleswig-Holstein • Availability: Immediately • Delivery: The sale is intended for self-collection. Assistance with loading on-site is possible upon agreement using a forklift. Dismantling of the ceiling structure (crane) and the piping is carried out by the buyer after consultation.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, cutting speed: 8,500 mm/min, workpiece weight (max.): 200 kg, input voltage: 380 V, input frequency: 50 Hz, overall weight: 4,500 kg, total length: 11,380 mm, total width: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, fume extraction, nozzle changer, safety light barrier, 2 Chuck Professional Pipe Laser Cutting Machine Max length of pipe: 6000mm*φ240mm Repeat positioning accuracy: ≤0.03mm Positioning accuracy: ≤0.05mm Max positioning speed: 85m/min Max acceleration: 1.0G Max rotating speed of chuck: 100r/min Round pipe: Φ10mm-Φ220mm Square pipe: 10mm*10mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm High-quality chuck 1)High clamping accuracy; 2)Sealed and dustproof; 3)Various types of pipes can be clamped; 4)Low failure rate; High-strength cage structure welded bed, high temperature annealing, gantry milling processing, anti-vibration, anti-torsion and anti-deformation; Professional industrial computer, resistant to high temperature and dust; Dust removal Chodpfx Abev Hkmvoasd Hollow rear chuck, dust is removed from the inside of the pipe, the dust removal effect is good, meet the requirements of environmental protection; Short tail function Support two kinds of short tail functions: rear chuck inserted short tail, front chuck movable short tail; Ensure that workpieces & pipes can achieve short tails, reducing material waste.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cjdpj Af E H Usfx Abashd Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade Chjdpfx Abs Af E Hnoajd

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling Chodpfxe Abal Ro Abaed The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Condition: used, Year of construction: 2021, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: NRGL614.01025, type of input current: AC, total width: 3,340 mm, input voltage: 400 V, input current: 19 A, SEI NRGL 1612 V300 – 300 W Industrial CO₂ Laser Cutter with Automatic Material Loader – Operational Industrial SEI NRGL 1612 V300 laser cutting system for sale. Manufactured in 2021 and equipped with a 300 W CO₂ laser source and material loading system. The machine is fully operational and available for inspection. Approximately 10,000 operating hours. Key Features: • SEI NRGL 1612 V300 • Year: 2021 • 300 W CO₂ laser • Working area: 1600 × 1200 mm • Automatic material loader included • Approx. 10,000 operating hours • Operational and available for testing • Located in Munich Germany Suitable for industrial processing of acrylic, textiles, technical fabrics, wood, paper, cardboard, and other non-metal materials. Chedpfx Aozcny Ajbaod Price: €30,000 VB Additional photos, videos, technical documentation, and inspection appointments available upon request. Transportation not included, can be discussed defined and agreed.

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Csdpozz Hhnofx Abaehd Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 152018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 2,500 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2026, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The laser beam output power is 2.5 kW. The machine can cut sheets up to 10 mm thick. Additional equipment includes a sheet loading device and a device for unloading cut parts. The machine is in operation, and its functions and cutting quality can be demonstrated. Cedpe Ahxvzjfx Abajhd The facility where the machine is installed can be rented, allowing production to continue without relocating the laser, which significantly reduces costs. A gas station with a nitrogen tank and oxygen cylinders is located near the facility. The facility covers an area of 1250 m2.

Year of construction: 1993, condition: used, Automatic cut and strip machine designed to process various types of wire. Csdpfxs Ah Sk De Abaehd

Condition: good (used), Ideal 4705 Paper Cutting Guillotine Cjdpjz Rk Ngsfx Abaehd This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Codozg D I Aepfx Abaehd NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Real photos in the gallery - machine comes new Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Max. workpiece height of 400mm Max. workpiece weight of 300kg Stable 1,400kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Codpfx Abeznttdoaehd Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available / one left in stock Estimated delivery time: approximately 90 working days, only one we have left in stock Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System Chjdpfxe Af E E Rj Abajd – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.