Used Wire Straightening Machine for sale (65,684)

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible Hnedpfxoin Rn Aj Ahvsi -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Hsdpfoxzikfsx Ahveni

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Hnodpfju Ic Hnjx Ahvoi Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 Hnsdpfxjvc Aklo Ahvsi A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, wire diameter - max. 10 mm Hnsdewu Hg Hspfx Ahvei wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: good (used), Year of construction: 2011, functionality: fully functional, section length (min.): 100 mm, section length (max.): 3,500 mm, type of input current: three-phase, For sale: Used WAFIOS RS4 wire straightening machine in good condition. Technical data: • Model: RS4 • Manufacturer: WAFIOS • Straightening range: 3 to 6 mm • Equipment: includes blade, straightening stones, feed rollers in various sizes, decoiler • Year of manufacture: 2011 Condition: • Fully functional, regularly serviced Hedow U Eubjpfx Ahveni Location: 74931 Lobbach Price: €9,900 net

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. Hnedpfx Ahewyaywovoi – Mašina je automatska – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Hsdoim Ittjpfx Ahvjni

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles. Hnodpfsrdvq Aex Ahvsi

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Hnedpfx Ajymn Hwohvji Henk Hoos.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, table load: 500 kg, TECHNICAL DETAILS Travel, X-axis: 350 mm Travel, Y-axis: 250 mm Travel, Z-axis: 220 mm Additional travel (U/V axis): ± 32 mm Worktable (W x D): 590 x 514 mm Load capacity: 500 kg Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions (W x D x H): 800 x 600 x 215 mm MACHINE DETAILS Control: Mitsubishi - Advance - CNC Hjdpfx Ahoytfx Djvoni EQUIPMENT Cutting in water bath Automatic wire threading Wire chopper Cooling unit

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: Hsdeyu Iq Espfx Ahvsni - Transport - Commissioning - Chiller unit - Clamping devices

Condition: good (used), Renz ECL500 Electric Wire Closing Machine The machine is in very good condition, ready for production. The Renz ECL500 Electric Wire Closing Machine: Electric cycle via a foot pedal Binding up to 34 mm (340 sheets) in a single cycle Cycle output: approximately 400 cycles/hour, depending on material type and format Foot-operated cycle control allows for two-handed material adjustment Spiral diameters from 3/16″ to 1 1/2″ can be handled independently of the pitch Quick adjustments to various spiral diameters in seconds Quiet operation. No compressor required Weight: 47 kg 230V power supply Hnodpfoyur Inox Ahvji

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Hnjdpfxevuugio Ahvoi Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm Hnsdpfx Ahjvut Rajvji speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 Hodovut Dtepfx Ahvsni with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, The GF AgieCharmilles CUT E600 from year 2017 is a powerful and precise used wire EDM machine, specifically designed for demanding applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent controls, the CUT E600 delivers top cutting quality, low maintenance effort, and excellent return on investment. Main Features & Benefits: ✅ Large Working Area: - Workpiece size: max. 1030 x 800 x 350 mm - Max. workpiece weight: 1,000 kg - Travel distances: X/Y/Z: 600 x 400 x 350 mm - U/V axes: ± 50 mm - Taper cutting up to ± 30° / 77 mm ✅ High-Precision Machining: - Position accuracy via glass linear scales - Automatic wire tensioning for consistently precise cutting results - Achievable surface finish: Ra 0.18 µm (steel) ✅ Efficient Wire System: - Standard wire diameters: 0.20 and 0.25 mm - Additional possible wire diameters: 0.10 / 0.15 / 0.30 mm - Automatic wire feeding and re-threading - 25 kg wire spool for extended operation times ✅ Intelligent Control & User Friendliness: - Modern AC CUT HMI control with intuitive user interface - 19-inch touchscreen display for easy programming - DXF import & 3D graphic verification for precise simulations ✅ Reliability & Low Operating Costs: - Energy-efficient generator with low power consumption (9 kVA) - Low maintenance costs due to robust construction and durable wear parts - Integrated collision protection for maximum safety Hnodpfx Asyud I Hshvoi Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT E600 – the perfect choice for precise and cost-effective wire EDM! 📌 Our used machine from year 2017 is cleaned, overhauled, and thoroughly tested prior to sale to guarantee top quality and reliability. 📩 Contact us for a tailored quotation or a demonstration! We are also pleased to offer commissioning and operator training on the machine upon request.

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. Hnedeyubh Repfx Ahvji They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. * Hsdpfx Aeuzbayjhvjni

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Hodpfxex Ekcys Ahveni Immersion in dielectric fluid

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TANK SIZE: 3495 x 3143 x 2633 mm TABLE SIZE: 1100 x 875 mm WEIGHT: 540 Kg Hjdpfxeytkdre Ahvoni

Condition: ready for operation (used), Year of construction: 2006, Semi-automatic wire comb binding machine Max. binding width (bound edge): 360 mm Min. binding width (bound edge): 60 mm Min. binding width (unbound edge): 60 mm Max. book thickness: 20 mm Possible wire diameters: 1/4"–1" (6.9–25.4 mm) Pitch: 3:1, 2:1 Max. speed per hour: 2,000 cycles per hour Effective speed per hour: 800–1,400 per hour Hnodpfoythxtsx Ahvei Technical data according to manufacturer's specifications; subject to confirmation

Condition: excellent (used), Year of construction: 2016, operating hours: 8,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,345 mm, total length: 2,945 mm, total width: 2,757 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, type of input current: three-phase, table width: 490 mm, table length: 840 mm, table height: 995 mm, empty load weight: 4,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 350 mm, table load: 1,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, documentation/manual, Commissioning date: May 2017. Cutting time: 8,000 hours. At our company, the machine operates in a climate-controlled, virtually dust-free facility with an epoxy-coated floor. Price of the machine – loaded onto a vehicle in Hungary. Shipping and all other costs are the responsibility of the buyer. Hsdpfxoyuutgj Ahvsni

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 92568/331430, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified period, between 04/05/26 and 07/05/26. TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm U-axis travel: 400 mm V-axis travel: 250 mm Taper angle/height: ±30°/200 mm Max. workpiece dimensions: 850 mm x 500 mm x 200 mm Max. workpiece weight: 500 kg Table dimensions: 720 mm x 500 mm Distance floor to table: 1,000 mm MACHINE DETAILS Control: CHARMILLES Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Hodpfsyr Nknsx Ahvjni Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,200 x 2,100 mm Door width: 900 mm Weight: 2,500 kg External reference: 59

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Hnedpfxsyr Niqe Ahvji Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. External reference: 58