Used Wire Draw for sale (7,555)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Cedpfx Aovax Iueb Tehf Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, lifting height: 6,000 mm, load capacity: 5,000 kg, lifting speed: 50 mm/s, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, wire rope hoist Konecranes CXT400 5000kg emag.6m bridge crane trolley, hoist, crane single girder bridge crane mounted 5 ton crane trolley for sale Manufacturer: Konecranes CXT400 Year of manufacture 2004/11 Load capacity: 5000 kg Working height: 6 m Type: CXT40410050P35FBL0F Date of manufacture: 29.01.2001 Lifting speed: Fast: 5.0 m/min Slow: 0.8 m/min Side travel speed: Fast: 20 m/min Slow: 5 m/min Voltage: 400v 50Hz Drive: 4.5/0.7kw Chsdpjxpphmefx Ab Tef Controller: 48V

Condition: good (used), Ideal for pallet racks with frame depth 800 mm and 2700 mm crossbars. It is also suitable for other uses. Size: 1340*820 mm (55*105 mm) Load capacity: about 400 kg/m2 If you need shelves or accessories in other compositions or designs, please contact us. We offer a wide range of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Cjdpshbhavofx Ab Tehf Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm Chjdpfx Aexvty Hsb Tjf This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 1976, number of stapling heads 1 Chsdpsv Ach Rofx Ab Tof

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Chodpfjv Nhk Dox Ab Tjf Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2025, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm Chedpfx Aexvh Hueb Tef -Weight: 318 kg

Condition: used, functionality: fully functional, Year of construction: 2001, lifting height: 8,000 mm, load capacity: 5,000 kg, input frequency: 50 Hz, wire rope hoist Konecranes XL300 5t emag.8m bridge crane trolley, hoist, crane double girder bridge crane mounted 5 ton crane trolley for sale Manufacturer: Konecranes Load capacity: 5000 kg Working height: 8 m Type: XL304N20ADA409B0K0 Date of manufacture: 29.01.2001 Lifting speed: Fast: 4.0 m/min Slow: 0.6 m/min Side travel speed: Fast: 25 m/min Slow: 6.3 m/min Chsdpfx Asxpphtsb Tof

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Csdpfx Abjxvdmde Tehf Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2015, functionality: fully functional, load capacity: 600 kg, total height: 900 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 49 kg, Metal Wire Baskets with Solid Bottom Dimension: 1200x800x900 mm Material Weight: 48–49 kg/pc Wire & Mesh: Wire diameter 6.0 mm, mesh pitch 50×100 mm Solid Bottom: 0.8 mm thick steel plate Load Capacity & Stacking: Load 600 kg/pc in use, stackable up to 6 layers Quantity: 3,000 pcs. Chsdpfoxwwfpex Ab Tjf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, Equipment: documentation/manual, type plate available, Wafios CNC bending and coiling center with loading magazine Type: BMZ 41 Machine No.: 2.7680.044 Working range: Wire diameter: at < 600 N/mm²: 3.0 - 8.0 mm Chedpoxwuuzofx Ab Tjf at < 800 N/mm²: 3.0 - 6.0 mm at < 1200 N/mm²: 3.0 - 5.0 mm at < 2000 N/mm²: 3.0 - 4.0 mm Tube diameter: at 50 pieces Minimum leg length at the beginning: 2 x d Minimum leg length at the end: 60 mm Distance between 2 bends

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travel: 1,200 x 800 mm U and V axis travel: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.3 mm Simultaneous controllable axes: 4 (X, Y, U, V) Motors: AC motors on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg Filtration system Capacity: 3,000 L Conductivity control: automatic Resin capacity: 14 L Temperature control: automatic Dielectric cooling system: chiller Generator Power circuits: Mosfet AC Minimum roughness: Ra 0.35 Cutting speed: 360 mm²/min (with 0.3 mm brass wire) Automatic wire threading: standard Power supply: 400V three-phase CNC Hardware: Industrial PC, 64 bit Memory: 1 GB Display: 15” TFT touchscreen Data input: keyboard, RS 232, floppy, LAN, USB Cedpfx Asxwmacjb Tehf Positioning system: closed-loop servo-assisted Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm Machine equipped with: • Optical scales on X and Y axes • 600 mm Z axis • Coil holder for up to 50 kg spools • 1 set of 0.25 mm guides • 1 set of 0.30 mm guides • Taper cutting system • Automatic wire threading and re-threading after breakage • Clamping system: frame with universal drilling • 64-bit CNC with 16 GB memory • AC power generator with anti-electrolysis device • Automatic technology generation • Serial interface, floppy drive, LAN, USB • Dielectric unit with automatic demineralization system • Chiller Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2015, operating hours: 9,014 h, functionality: fully functional, machine/vehicle number: MV2400S, overall weight: 3,500 kg, total length: 2,687 mm, total width: 3,030 mm, total height: 2,150 mm, input voltage: 400 V, input current: 50 A, type of input current: three-phase, input frequency: 50 Hz, Accessories: - ODS optical drive system - Tubular Direct Drives on X, Y axis - Scale on X, Y axis - Intelligent automatic wire feeding system (wire diameter 0.1 - 0.3 mm) - (Can be used both dry and underwater) - Wire straightening system - Automatic wire cutter (for thicker wires) - Automatic hole search - MITSUBISHI M700 controller - 3D CAD/CAM control system - 5 controlled axes + prepared for additional axes - PFC precision finishing (Precise Finish Circuit) - LLS long life system - 10 kg wire coil holder (receiver) - U-shaped hardened segmented receiving table - Compressor dielectric (water) cooler equipment - Remote communication preparation (mcAnywhere) - CE version - H/W 30°/45° (30/45° cutting capability instead of 15° for 0.25 mm wire Controller: - MITSUBISHI ELECTRIC "ADVANCE Plus" control software. - MITSUBISHI M700 control with 3D CAD/CAM software. - 10 GB memory - 15" touch screen - Clear layout of the main functions on the screen. - Programming with ESPERADVANCE conversational system. - The controller is prepared to receive 3D files. - Graphical inspection: 3D, front view, side view, top view. - Hand-held control unit. Codpfjvvt Afex Ab Tshf - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Cjdpfjwr Utiox Ab Tehf Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, pressing force: 320 t, table width: 1,200 mm, table length: 1,200 mm, retraction force: 140 t, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE DELIVERY FROM STOCK H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 320 TONS CAPACITY (POT) 140 TONS MAIN TABLE SIZE 1200 x 1200 mm MOVING TABLE (RAM) SIZE 1200 x 1200 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 1000 mm Cjdpfjvx T Hpjx Ab Tjhf STROKE (POT) 350 mm MIN. OPENING HEIGHT 300 mm MAX. OPENING HEIGHT 1300 mm STRESS RELIEF afer WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) PROPORTIONAL SPEED AND PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. At different points of the pressing process, different speed, stop and pressure values are entered and the effect of material and mold deformations on the work is minimized with proportional precision. MAX. PRESSURE 250 Bar – Proportionally adjustable ENGINE POWER 37 KW – IE3 PUMP FLOW RATE 70 cm³ – REXROTH FREE FALLING SPEED 50 ~ 600 mm/sec. – Proportionally adjustable PRESSING SPEED 10 ~ 72 mm/sec. – Proportionally adjustable ASCENDING SPEED 90 ~ 750 mm/sec. – Proportionally adjustable DIE-CUSHION WITH SPEED – UP 50 ~ 190 mm/sec. – Proportionally adjustable MAIN CYLINDER DIAMETER Ø380 mm – Ck45 POT CYLINDER DIAMETER Ø270 mm – Ck45 AUXILIARY CYLINDER NUMBER Ø100/60 mm Ck45 – 2 pc. PRESS HEIGHT 7300 mm PRESS DEPTH 2040 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1630 mm PRESS SIDE WINDOW SIZE 500x1685 mm PRE-FILLING VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH WET COOLING EXCHANGER CIESSE OFF-LINE FILTRATION REXROTH CIRCILATION MOTOR PUMP REXROTH – 3 kW ENGINE USED IN THE UNIT IE3 LEVEL INDICATOR REXROTH FAN COOLING REXROTH – 10 MICRON PRESSURE FILTER REXROTH – 10 MICRON RETURN FILTER REXROTH – 25 MICRON OIL AND HEAT INDICATOR REXROTH USED VALVES REXROTH FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATINON ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC FORGET OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. PLC DELTA TOUCHSCREEN DELTA KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS KEYENCE, LEUZE, PILZ or SICK – 2 pcs. APPROXIMATE WEIGHT 27 TONS

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: Chedpfxsxrta Eo Ab Tef The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Path Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Cjdpfx Aoxu Uzcjb Tehf Total weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of input current: three-phase current EQUIPMENT 16 kg spools Note: Dismantling and loading can be carried out by the seller at an additional charge.

Condition: used, für Draht hydraulically tiltable ja 2 t Csdpfxjh Tafxj Ab Tohf Year unbekannt Hydraulik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 1,000 mm, total width: 300 mm, load capacity: 150 kg, total length: 1,200 mm, Metal shelf for displaying promotions or fast-moving products, typically installed near the checkout area. This is a professional and economical solution for product merchandising. Dimensions: height 1 m, length 1.2 m, width 30 cm, color anthracite grey, RAL 7016. The shelf is stable and does not require floor fixing. We provide VAT invoice! Price plus VAT! Cedpow S Iqmefx Ab Tehf

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Chjdpfxexu Hvlj Ab Tsf Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,000 mm, retraction force: 100 t, Equipment: safety light barrier, H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 200 TON H TYPE SERVO HYBRID HYDRAULIC PRESS TECHNICAL SPECIFICATION – EHP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 200 TONS CAPACITY (POT) 100 TONS MAIN TABLE SIZE 1000 x 800 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 600 mm STROKE (POT) 200 mm MIN. OPENING HEIGHT 200 mm MAX. OPENING HEIGHT 800 mm STRESS RELIEF after WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar MOTOR POWER 30 kW – HAWE – SERVO MOTOR FREE FALLING SPEED 150 mm/sec. PRESSING SPEED 15 mm/sec. ASCENDING SPEED 200 mm/sec. RAM CYLINDER DIAMETER Ø 320 mm – Ck45 POT CYLINDER DIAMETER Ø 230 mm – Ck45 AUXILIARY CYLINDER NUMBER 2 pcs. PRESS HEIGHT 4400 mm PRESS DEPTH 1800 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1150 mm ENGINE Protection Class IE3 PRESSURE FILTER PARKER USED VALVES HAWE FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATION ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL Csdpfxsv D Rv Eo Ab Tshf PLC SIEMENS S71510 TOUCHSCREEN PANEL SIEMENS KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS PILZ– 2 pc. APPROXIMATE WEIGHT 10 TONS

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Payload 6300KG / 6.3t payload / lifting load - 4 strands with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) with control bottle and connection plug for the power supply Cedpfevbck Aox Ab Tjhf Weight complete approx. 400 kg, connection to 400V 50Hz Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Codpfoxq Akwox Ab Tjhf Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Condition: used, Year of construction: 1989, serial number L169 output 6 kw ja seperat Chsdpfxovu Hl Rj Ab Tof digital readout ja Wizard Puls50 Kühlwasseraufbereitungsei

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 50163, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the bidder to collect the machine within the designated timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm MACHINE DETAILS Electrical Data Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 80 A Connection: 12 kVA Chsdpfxsxqp R Ds Ab Tef Tank dimensions (L x W x H): 900 x 500 x 600 mm Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,500 mm Weight: 4,000 kg EQUIPMENT Documentation