Used Wire Coiling Machine for sale (66,237)

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric Control Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives in XY axes Linear scales in XY axes Intelligent AT – Automatic Wire Threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function Pgedpfexpfy Ssx Ahvsi 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä17326

Condition: used, Year of construction: 1994, EDM machine Charmilles Robofil 2020 and 4020, year of manufacture 1994 and 1996 Pgsdpfjyq R Tbex Ahvsi

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown Psdpfowhf Hfox Ahvsgi - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 2003, CNC wire EDM machine Fanuc Pgsdsypluqepfx Ahvoi Model Robocut Alpha 1iB Year of manufacture: 2003 Travel distance XY axis: 550 x 370 mm Travel distance U V axis: plus / minus 60 mm Z axis adjustment: 410 mm Max. workpiece weight: 1000 kg

Condition: excellent (used), Year of construction: 2013, workpiece weight (max.): 800 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, total height: 2,290 mm, total length: 2,720 mm, total width: 2,520 mm, type of input current: three-phase, overall weight: 3,850 kg, table length: 1,000 mm, input voltage: 220 V, tank capacity: 850 l, input frequency: 50 Hz, Equipment: documentation/manual, We offer the machine EXCETEK V650G in very good condition. Year of construction 2013. The machine has been in our ownership since the beginning. The machine has been serviced from authorized slovenian service company and we have all the service lists. The machine is placed in Zagreb, Croatia. PRICE = 23.800,00 EUR Loading is included in price! Model number: V650G Serial number: MWI3650010 Assembly number: A0A2400601 Manufacturing date: 2013/06 Pedpjyn Silofx Ahvegi Weight: 3850 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible Pgjdpfxsin Rn Ao Ahvji -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 Pgsdpfx Asyknpgshvsi 4000 operating hours since overhaul Control: MARK 30 LN 1 W Wire threading: 97 Pipe AWT

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Pgsdpfxjw A Iils Ahvji Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, Year of construction: 2025, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Cutting area 6000 × 1500 mm Pgsdpfxew A Ik Ns Ahvsi X‑axis travel 1520 mm Y‑axis travel 6020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L × W × H) 14500 × 2300 × 2380 mm Floor footprint 15500 × 2800 mm Net weight 6000 kg Fully automatic cutting, material saving, fast speed

Condition: ready for operation (used), Lot of Well Ascent copper coil/winding wire Various widths and thicknesses: 0.274 x 2.070, 0.190 x 2.760, Podpsym Amfsfx Ahvsgi 0.080 x 1.000, and more. Total of 25 reels Copper wire weight: ~115 kg (approximate) Manufacturer: Well Ascent

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup Pgodpov Dkvrsfx Ahvei AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Pgodogzv Scopfx Ahvoi Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Pgedpfx Ajyir N Uohvoi Net weight: 6000 kg The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered on request.

Condition: excellent (used), Year of construction: 2006, Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 Pjdpfx Aewt N Uqshvogi With accessories More pictures and data will follow shortly.

Condition: good (used), Year of construction: 2021, Wire EDM machine MITSUBISHI MV2400S II, no. 51DC2501, year of manufacture 2021, weight 3,500 kg, with various auxiliary units, work area 600 x 400 x 310 mm Podpfxjyl Uu Ee Ahvogi

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Psdpfx Ahsx Igc Uevogi Lukas van Rossum

Condition: used, machine/vehicle number: 6099, Coil winding machine HDR type 20.1/89 Winding diameter: 200 mm, laying width: 350 mm Max. wire diameter: 2.5 mm Pedpfsyl Ntisx Ahvsgi

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm Pgjdsylzurjpfx Ahvoi HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, machine/vehicle number: 85252. und 85122, Coil winding machine Aumann WG 85253 Winding diameter 160 mm, laying width 550 mm Wire guide DF 50 No. 85099 defective Coil winding machine Aumann PW 85122 Winding diameter 100 mm, laying width 200 mm Podpoylztuefx Ahvogi Wire guide DF 70 No. 85115

Condition: used, machine/vehicle number: 8528, Coil winding machine Blume und Redecker AM 2100 Pgsdpfxsylzr Ro Ahvoi Winding diameter: 330 mm, laying width: 700 mm Maximum wire thickness: 2 mm

Condition: used, machine/vehicle number: 10458, Coil winding machine Meteor M 10 Winding diameter: 80 mm, winding width: 60 mm Pgjdpfxsylzqto Ahvsi Max. wire thickness: 0.3 mm

Condition: used, machine/vehicle number: FN 100, Coil winding machine Winding diameter: 120 mm x 200 mm Maximum wire thickness: 0.3 mm Pgedpfeylzn Sox Ahvei

Condition: used, Micafil winding machine Winding diameter 160 mm, laying width 400 mm Pedpsylzmujfx Ahvjgi Wire diameter 0.06 - 1.5 mm

Condition: used, machine/vehicle number: 8544, Coil winding machine Blume und Redecker AM 100 Winding diameter: 200 mm, laying width: 600 mm Maximum wire diameter: 2 mm Pedpfx Asylzghohvogi

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Mitsubishi wire-cut EDM machine FA20-S advance, year 2011, fully functional. Can be inspected under power. Pgsdpfxoylyhks Ahvsi