Welding fume extractor

ISI Industrie-Produkte GmbH TE 1200

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Pgedpsu Ttf Nsfx Amyop Take-off device and impact shears

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Pjdpfx Amjhpmaweyogp Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor Pgedpfx Amjwxvadoyjp 3 zone screw 35-25d fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: good (used), Year of construction: 1998, Semi-automatic circular saw machine Manufacturer: KASTO, Type: V350 U, Year of manufacture: 1998 with miter cut, roller conveyor, and stop Pgjdpfxjfym Ewj Amyep Saw blade diameter: 350 mm Pneumatic clamping device and saw feed Infinitely adjustable. Machine is in good condition and has seen little use.

Condition: ready for operation (used), Year of construction: 1994, Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible. Psdpfx Amswydgheyogp

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Pjdpevw Aqhofx Amyogp

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 Pgodpfxoya Elds Amyjp • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction Psdjd E Tftopfx Amyegp -Drive: 1.1 kW - Connection: 380V 50Hz - Flow rate: 700 m³/h -Max. Pressure: 1,600 Pa -Inlet diameter: 200mm -Outlet diameter: 250 mm -Number: 1 suction available -Dimensions: 1320/655/H1275 mm -Weight: 192 kg

Year of construction: 2025, operating hours: 2 h, condition: like new (used), functionality: fully functional, DG 2660 E granulator, 15 kW, rotor width 600 mm, rotor diameter 260 mm, 3 rows of knives, V-cut, 2 rows of counter knives. With soundproof enclosure. Showroom machine, as good as new. Pjdpsv Iqyxjfx Amyogp

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar Pgsdpfxou Niuzo Amysp electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *