Mobile welding fume extraction

Euromate MFS UltraFlex

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Fedpfx Akopu R Ncjyjgh Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms Fsdswn Egropfx Akyegh - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction -Drive: 1.1 kW - Connection: 380V 50Hz - Flow rate: 700 m³/h -Max. Pressure: 1,600 Pa -Inlet diameter: 200mm Fgedpfx Aod E Tftokyjh -Outlet diameter: 250 mm -Number: 1 suction available -Dimensions: 1320/655/H1275 mm -Weight: 192 kg

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: Fgsdpex I Afxofx Akyoh - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW Fodpfx Akewqdycoyegh - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Fedpfx Aksu S Tfgsyegh Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS Fsdpfeyz Dilex Akysgh (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Fjdez Hwypspfx Akyjgh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm Fgedpfx Aksztwgreyoh -Weight: 31 kg