Used Welding Fumes for sale (5,641)

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge Lasdpfx Aoy N Duqjftod - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Lajdpfxovxtkzs Aftjd Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Lodpfxjy T Uxne Aftead Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated Ledpfx Aouud Irjftoad integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Lsdox Da Tiopfx Aftead Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Lsdpfx Afoy Hq Rtstoad

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m Laodpfxsu A Thlo Aftsd depth - 1.25m fan: 1.00m x 1.00m

Condition: used, type of input current: three-phase, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type by TEKA. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 4 kW Capacity: 4000 m3/h Vacuum: 2500 Pa Laodpfxsy Hhd Do Afted Filtration surface: 40 m2 Inlet diameter: 315 mm Device dimensions: Height - 2.50 m Width - 1.25 m Depth - 0.97 m Stock no. - 1116

Year of construction: 2000, condition: good (used), Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum-based, brand: ESTA Model: SRF P13 JET For welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Fan power: 3 kW Capacity: 1850 m3/h Filtration area: 15 m2 Lasdpfsirt Amox Aftsd Vacuum: 4300 Pa Inlet diameter: 2 x 160 mm Year of manufacture: 2000

Condition: not inspected (used), Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum-based. For welding, grinding, sandblasting, and all types of dry dust. Cartridge-type filter inserts. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. Fan with a power of 3.2 kW. Lasdpfxoip Nkts Aftjd Capacity: 1600 m3/h.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum type by KEMPER. Laodpfx Afetq E Sistod Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation, suitable for high-concentration welding fumes and dust filtration. Appropriate for all welding methods with carbon steel, low-alloy and high-alloy steel, as well as aluminium. Cost-effective operation thanks to the long service life of the filter cartridge. Due to IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Specifications: Airflow capacity: 1,100 m³/h Maximum negative pressure: 3,200 Pa Three-phase fan motor: 1.5 kW Filter surface area: 15 m² Year of manufacture: 12/2023 Cartridge filter element with PTFE membrane Filtration efficiency: > 99.97% Built-in delay time controller for start-stop operation. With the optional start-stop sensor connected, the extraction delay after welding can be set between 5 to 60 seconds. Stock no.: 1071

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Ljdpfoxz R Aiex Aftjad

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Lasdpfx Asunh Uvefted Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Model : DUSTEX F-64 The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Lajdpfx Afevkd Rpotjd Capacity - 4500 m3/h Vacuum - 3200 Pa Filtration area - 64 m2 Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 The device from the year 2007

Condition: used, Year of construction: 2006, suction capacity: 10,300 m³/h, negative pressure: 4,400 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is installed on the clean air side, minimizing the risk of explosion. Specifications: Max. airflow: 10,300 m³/h Max. negative pressure: 4,400 Pa Ledox Hxycepfx Aftsad Filtration surface area: 126 m² Cartridge filter elements: 6 pcs Motor power: 7.5 kW Inlet diameter: 315 mm Unit dimensions: Height: 3.70 m Width: 2.00 m x 1.35 m Base: 1.45 m x 1.02 m Stock number: 1095

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Ljdpfx Afjn Nw Ntstoad Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) Laedpfx Afetpui Istod SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Laodpfx Ajrk Itcofted The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Lajdpfxswthbvs Aftjd Technical data: * max. volumetric flow: 6,000 m³/h * filter area: 60 m² * motor power: 5.5 kW * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Laodpfxsicic He Aftsd Weight approx. 2000 kg Very good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch Lodpfsu S Tfgjx Aftoad - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Laodpoxxkzmofx Aftjd Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 875 kg, volume flow: 2,750 m³/h, Donaldson dry extraction unit for sale Capacity: Lasdpfxoulgl Ie Aftjd Q 2.750 m³/h 5,5 KW further technical data see pictures Condition very good. Can be viewed at any time

Year of construction: 1996, condition: used, Dust extraction system, fume extraction system, self-cleaning filter, cartridge filter for plasma cutting, laser cutting, sandblasting, and shot blasting. The filter is cleaned pneumatically with pulses of compressed air during operation, which ensures high efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: STURM Model: 3-7x20/140 DLR P Year of manufacture: 1996 Engine power: 7.5 kW Capacity: 4200 m3/h Lasdoif Rluepfx Afted Inlet diameter: 200 mm Cartridge filter elements: 7 pcs. Filtration area: 140 m2 Includes electrical diagram and partial ductwork.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms Lsdpfxswn Egre Aftoad - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg