Used Welding Fumes for sale (5,716)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of cooling: water, CoWelder with Universal Robots UR10 – Migatronic Pi 350 AC/DC We are offering for sale a CoWelder robotic welding system with Universal Robots UR10, complete with Migatronic welding equipment. The system was purchased in 2021 and has been used in production, but only to a limited extent. It is in good condition and available for immediate sale. Equipment included: CoWelder robotic welding system Universal Robots UR10 collaborative robot Migatronic Pi 350 AC/DC welding power source Cold Wire Feeder (CWF) Water-cooled welding torch Ndsdpfxjz D Uufo Af Sjb The system is suitable for automated and repetitive welding applications and can be used for a wide range of welding tasks. Technical information: Manufacturer: Migatronic / Universal Robots Model: CoWelder / UR10 Robot: Universal Robots UR10 Welding power source: Migatronic Pi 350 AC/DC Cold Wire Feeder: CWF Water-cooled welding torch Year of purchase: 2021 Condition: Used, good condition The welding/work table is not included in the sale. The equipment can be inspected by prior arrangement. Price: EUR 34,900 net + VAT The equipment is sold as a complete set.

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Nedpfozw Eu Sjx Af Sodb

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Njdpez Dv Dnofx Af Ssdb

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation Ndjdpfx Afjzqucfo Sjb The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. Ndedpfszx D Tcex Af Ssb The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! Ndedpshzhynofx Af Seb We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland. Ndodpfx Afeurlcro Sjb

Condition: excellent (used), For sale: a BOFA ES400i industrial extraction unit, manufactured by BOFA International for Markem-Imaje. This unit is designed to extract and filter contaminants generated during the operation of marking devices, including lasers. The metal housing is equipped with wheels, a control panel, and connectors for connecting the extraction system. The interior and visual condition of the unit are shown in the photos. Data from the nameplate: - Model: ES400i Ndjdpfx Afoz Ezr Te Seb - Part number: 0695914 - Power supply: 230 V, 50/60 Hz, 6.20 A - Date of manufacture: 03/2009 - Serial number: 03/09/ES400i-1111

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. Nodpozwac Rsfx Af Sedb For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source Nedezty D Hspfx Af Sedb 6-axis industrial robot Arc sensor / Tactile sensor Automatic torch cleaning 2-station operation Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Ndsdpfx Afeci Ik Sj Ssb Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, 🔥 FOR SALE: Fiber Laser Welding Machine — XTW-1000 (2020) A professional-grade fiber laser welding machine, model XTW-1000, manufactured in June 2020, is for sale. The machine is in excellent working condition and ready for immediate use. This unit is perfectly suited for precision welding of stainless steel, carbon steel, aluminum, copper, galvanized sheet, and various metal alloys. Laser welding is 4–10 times faster than conventional TIG/MIG welding, produces clean and smooth welds with minimal heat distortion, and requires little to no post-processing work. 📋 TECHNICAL SPECIFICATIONS • Model: XTW-1000 • Laser type: Fiber laser • Output power: 1000 W • Laser wavelength: 1080 nm Nedpfjyzcg Nox Af Ssdb • Laser spot size: 1–2 mm • Rated power: 7500 W • Supply voltage: 220V / 50Hz • Current: 30 A • Laser safety class: Class 4 • Serial number: 202005145 • Manufacturing date: 2020-06-01 • Certification: CE ✅ APPLICATIONS • Sheet metal processing & manufacturing • Stainless steel product & kitchen equipment fabrication • Automotive repair & bodywork • Elevator & staircase manufacturing • Tool & hardware production • Custom metalwork & repair workshops 📞 For further details and pricing — contact the seller!

Condition: used, Year of construction: 2006, functionality: fully functional, High-frequency welding machine ERKA (06-016-101) FIAB HF generator 8 kW, model P-8 GF Njdozud Aijpfx Af Sodb with accessories Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. Ndodpfx Aoib Dadsf Seb The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Year of construction: 1993, condition: good (used), Radial fan, high-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, extraction fan, fan, pressure fan, vacuum fan, ventilation fan, fan, radial fan -Manufacturer: Höcker, radial fan extractor fan -Type: TRE 05-315 -Engine power: 1.1 kW / 2800 rpm -Volume flow: 2500 m³/h -Connection input: Ø 300 mm -Connection output: Ø 300 mm -Fan wheel: Ø 350 x 140 mm -Protection class: IP 54 Nsdpfev E D Rxjx Af Ssdb -Dimensions: 750/440/H950 mm -Weight: 53 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h Ndjdpozukp Aofx Af Seb -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Njdpfoz D H Drjx Af Sjdb Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Ndodpfozudivjx Af Sjb Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition Ndodpfx Afezzaxas Ssb The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Ndjdpfxezd Twbo Af Sjb The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: new, Year of construction: 2020, functionality: fully functional, operating hours: 10 h, SPECIAL OFFER / 6-Axis Robot Machining Center 🔥 Universal 6-Axis Robot Center – Milling, Welding, Grinding, 3D Printing & More | Modular configuration available from €49,000 to €99,000 (net) Product Details • Year of manufacture: 2020 • Condition: NEW – The system was exclusively used for demonstration and promotional purposes. No heavy-duty or machining work was performed. • Original price: €199,000 (net) • Warranty: 1-year warranty on the system Highlights and Features 1. OCTOPUZ Software o Value: €25,000 o Serves as the interface between the KUKA controller and SolidCAM. This powerful software makes programming easy and efficient, especially for complex machining tasks. 2. Precision KUKA Robot o Value: €85,000 o Exceptional precision and reliability, perfectly suited for demanding applications such as milling, cutting, welding, grinding, polishing, including material handling. o Handheld control panel. o Up to 5,000 mm working range. o Up to 120 kg load capacity. 3. High-quality KEB Controller Nodpfou T Rx Tjx Af Sjdb o Value: €15,000 o Supports automatic tool changing, spindle control, and specific add-on modules such as:  Chip, vapor and fume extraction  Welding torches  Tool heads for a range of applications 4. High-Speed Spindle o Value: €5,000 o Perfect for precise machining of steel, aluminum, wood, plastic, and other materials. 5. Robust Frame with Large Machining Table o Value: €20,000 o Aluminum table for horizontal and vertical machining, ideal for both small and large workpieces. Note: The stated values refer to the pure component costs without fasteners, adapters and brackets, as well as assembly and machining costs. Applications and Advantages This robot machining center is extremely flexible and can be used for a variety of tasks: • Milling: Complex, three-dimensional geometries with the highest precision. • Welding: Integration of a welding head for versatile metal processing. • Material Handling: Automatic workpiece feeding for increased efficiency. • Surface Processing: Polishing, grinding or deburring. The machining center is ideally suited for integration into a fully automated production line. Sale Price and Options • Special offer: €113,000 (net) for the existing system in its current configuration. • Modified version: €149,000 (net) for customer-specific adaptations, such as the integration of tool changers, welding or laser cutting heads. (Welding and laser units not included in the price and must be provided separately.) Inspection and Delivery • Connection: The system is ready for operation and can be inspected at any time. • Delivery time: Immediately available. Lead time for modifications upon agreement. • Disassembly and transport: Not included in the price. Additional Advantages • Future-proof: Expandable and adaptable for new applications. • Mobility: Usable at different locations. • Cost-effectiveness: Saves time and costs due to multifunctional capabilities. Do you have any further questions or would you like individual consultation? We are happy to assist you!

Condition: used, Year of construction: 2001, operating hours: 12,790 h, Easy-to-use welding cell equipped with an ABB IRB140 robot and an S4C+ M2000 control system, as well as Fronius TPS welding equipment. A convenient solution for smaller welding projects, with a design that makes it easy to position and move as needed. Only a pallet truck is required to move it. The cell has primarily been used for trial welding and demonstrations. Specifications: - ABB IRB140 - ABB S4C+ M2000 control system - Fronius TPS welding equipment - Compact design Nodpfez Apzyex Af Sjdb - Suitable for smaller welding projects - Used for trial welding and demonstrations - Easily moved with a pallet truck

Condition: like new (used), Year of construction: 2012, operating hours: 90 h, functionality: fully functional, type of input current: three-phase, total height: 1,100 mm, total width: 500 mm, total length: 1,200 mm, overall weight: 60 kg, Offer little used welding set Orbital welding of pipes on site (with or without oscillation, depending on pipe thickness) with assembly! Pipe diameter from 25–115 mm Pipe thickness from 1–8 mm Inside includes a pipe cutter, welding arm, remote control, equipment with cooling system everything you see in the pictures. Length x width x height 1200 × 500 × 1100 Nedpfx Ajv Di S Esf Sjdb

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON Nodsykvdlepfx Af Ssdb The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. Ndedpeztn Sxsfx Af Sob The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.