Used Weiler Primus 2 Cnc for sale (200)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders Itedpoyylqhjfx Aa Esi >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard Itedpfjyyb T Sjx Aa Eoi >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: good (used), Year of construction: 2001, Weiler DA 210 Lathe Weiler DA 210 with Fagor digital readout, year of manufacture 2001, in very good original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant!! Technical Data: WORKING AREA Centre height: 210 mm Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre distance: 1,000 mm Itjdpfxsy Auyqe Aa Esi SPINDLE Spindle nose: DIN 55027 / DIN ISO 702-3 Size 6 Spindle bore: 52 mm Spindle bearing diameter (front): 83 mm MAIN DRIVE Drive power 60% / 100% duty cycle: – / 5.5 kW Speed range: 44 – 2,000 rpm Number of speeds: 12 FEED RANGE Number of feeds: 66 Longitudinal: 0.072 – 4 mm/rev Cross: 0.036 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.5 – 28 mm TAILSTOCK Quill diameter: 65 mm Quill stroke: 120 mm Internal taper: DIN 228 MK 4 ACCEPTANCE ACCURACY DIN 8605 About the machine: HIGHEST PRECISION, USER-FRIENDLY OPERATION AND SOPHISTICATED TECHNOLOGY are advantages of the conventional Weiler DA series. Offered is a Weiler DA 210 lathe with Fagor digital readout, year 2001. This lathe is in very good original condition. It comes from a workshop where it was only occasionally used for special production. Very easy to operate controls. The guides are regularly lubricated via the central lubrication system. The Weiler DA 210 has been mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler DA 210 under power at our facility. You can find further lathes from well-known manufacturers on our website.

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring Ijdpfx Aaeyu Ilis Eeti :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm Itsdpfx Aoyah Rvja Esi - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: • Hardening and grinding of all bed guides • Grinding of tailstock guides • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts Itedpfjx D Hz Tjx Aa Eoi • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Iodpfx Aex Sqvgea Esti

Condition: ready for operation (used), Year of construction: 2002, Lead and feed screw lathe / WEILER COMMODOR 230 AC - CE marking - Year of manufacture: 2002 - Center height: 230 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Distance between centers: 1000 mm - Spindle speeds: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: metric / imperial / module etc. - Spindle nose DIN 55027 / size 6 - Tailstock taper: MT 4 - Drive power: 11 kW - Electric chuck guard - Multifix toolpost with inserts - Three-jaw chuck - Chip guard with work light - 2x Emergency stop - Coolant system - Machine feet - Documentation Dimensions (LxWxH): 2.6 x 1.1 x 1.6 meters / Weight: 1900 kg Itodpfx Aajywtiys Eji Errors and omissions excepted.

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Ijdsykca Hopfx Aa Esti Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Condition: very good, used Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force transverse 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse speed longitudinal/transverse 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread pitches 99 Tailstock diameter 50mm Tailstock travel 130mm Iedpfx Aezmpyqsa Eoti Internal taper of the tailstock MK3 Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Scope of delivery Chuck Multifix including 17 tool holders Machine light Coolant system Machine feet Original documentation Drawer cabinet

Condition: excellent (used), functionality: fully functional, Weiler Commodor lead screw and drawstock lathe with 3-axis digital display, K&C, NEW, overhauled with acceptance report for tolerances comparable to new machines. Technical data: Ijdpfx Aaszmh Hvj Eoti >> Machine No. 0158 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be engaged >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming for 200 items, taper calculation, radius/diameter, quick zeros, switching the counting direction. >> 3-jaw chuck NEW 200mm, 2 sets of jaws >> Mulifix size B with 2 steel holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Optional: Covers for the lead screw and drawstock About the machine: Offered is a Weiler Commodor lead screw and drawstock lathe in geometrically overhauled condition. The guides have been newly ground or newly scraped. Acceptance after test report. 2-component white glossy paint. The accessories, Mulifix and chuck, are new. For safety: The machine has a brake motor, electronic spindle protection, and two emergency stop buttons – an absolutely like-new lathe. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. Take advantage of the opportunity to inspect this machine on-site under power and be convinced of its condition.

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Ijdpfx Aaeuqb Emj Eeti Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Itsdpfx Aszbhnqja Eoi Spindle bore: 36 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Multifix A with 4 holders, additional accessories available upon request. Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up. Iodpfx Aaozkpwqo Ejti

Condition: excellent (used), Year of construction: 2013, WEILER Praktikant GS – Precision lathe For sale is a used WEILER Praktikant GS precision lathe. Technical data: • Manufacturer: WEILER Ijdpfx Aaozl D Ums Eeti • Type: Praktikant GS • Machine number: ID03 • Year of manufacture: 2013 • Operating voltage: 400 V • Control voltage: AC 230 V • Connected load: 5.5 kW • Rated current: 7 A • Frequency: 50 Hz • Main fuse: 25 A • Design: 1 • Machine weight: approx. 710 kg The machine is ideally suited for use in workshops, training companies, and for the precise production of individual parts and small series. It is being sold as a used machine. Inspection and functional testing are possible by arrangement.

Condition: used, Year of construction: 2000, functionality: fully functional, Lead and feed screw lathe Make: Weiler Model: Condor B Year of manufacture: 2000 Technical data Manufacturer: Weiler Model: Condor B Year: 2000 Centre height: 165 mm Centre distance: 750 mm Spindle bore: 40 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle speeds: 45 – 2800 rpm Longitudinal feed: 0.015 – 3.7 mm/rev Metric thread pitches: 0.18 – 28 mm Main drive motor: 1.5 / 3 kW Dimensions (LxWxH): approx. 1.83 x 0.90 x 1.30 m Weight: approx. 1020 kg Equipment includes: - 3-axis Heidenhain digital readout - 3-jaw chuck - Operating manual - Collet chuck - Tool holder Ijdjy Ryvaspfx Aa Eeti All information subject to change; no liability assumed. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Year of manufacture: 2002 Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Turning diameter over bed: 410 mm Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Itsdpfx Ajy R Uuksa Eoi Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Ijdpfjzi S Snjx Aa Eoti Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Weiler 1109 grinder Isdpfjzlr Nrox Aa Eoti Height: 2100 mm Width: 1200 mm Length: 1800 mm Weight: 1800 kg Power supply: 400V 50Hz 3N Capacity: 22000 kg/h Total power: 75 kW Loading: No loader, optional post loader available Throat diameter: 279 mm Grinder type: Straight grinder Stuffing feeding system for the screw: Hopper

Condition: good (used), Year of construction: 1994, cycle controlled lathe Machine type: Weiler E 35 Ijdpfx Aoziy A Ija Ejti Control: Siemens 805 Year: 1994 Available after: sofort / now SPECIFICATIONS Center height: 200 mm Max. turning length: 950 mm Turningdiameter: 410 mm Max. swing over slide: 200 mm Spindle bore: 54 mm Spindle speeds: 20 - 3.000 rpm Tailstock: MK 4 Travel X-Axis: 230 mm Power consumption: 10 KW Machine weight: 2100 kg Equipment 46 Spannzangen 173 E nach DIN 6343 / 46 collets 173 E DIN 6343

Condition: used, Year of construction: 1979, 1 used lead screw and turret lathe Manufacturer: Weiler Type: Commodor Technical data: Center height: 190 mm Swinging diameter over bed: 380 mm Swinging diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Spindle mounting: DIN 55027 size 6 (A2-6) Spindle taper: MK 6 Spindle diameter in the front bearing: 90 mm Itsdpfxozlgxns Aa Eei Speed range: 25 – 2000 rpm Number of speeds: 18 steps Longitudinal feed: 0.026 – 0.90 mm/rev Cross feed: 0.013 – 0.45 mm/rev Metric threads: 0.3 – 10 mm Inch threads: 80 – 2.75 threads/inch Tailstock quill stroke: 150 mm Tailstock quill taper: MK 4 Dimensions: Length: approx. 230 cm Width: approx. 110 cm Height: approx. 200 cm Weight: 1600-1700 kg with digital display

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture 2008, Siemens 840 D control system, Travel range X/Z 200/350 mm, Turning diameter 180 mm, Maximum swing diameter 560 mm, Y-axis +/- 25 mm, Q-axis / programmable steady rest, Q-axis travel range 360 mm, Q-axis rotary measuring system, Steady rest, MK 4, Main spindle, maximum bar diameter 42 mm, Spindle bore 52 mm, Rapid traverse rate X/Z/Q 30/30/20 m/min, 16-station turret - all stations driven, VDI 25, Shaft diameter 25 mm, Driven tools up to 4,500 rpm, Itsdpfxozlc Eke Aa Eoi Tool tray, Accessories, Gobmey Ev Iusbf Sljbp, Driven tool holder, Fixed tool holder.

Condition: excellent (used), Year of construction: 1979,

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n Itjdpfx Aox D Ibboa Eoi • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under powerThe machine has been working effectively in 1-shift operation since it was purchased/ Optional euipment (extra charge):The chuck incl. hard & several sets of soft jawstailstocktools steady rest The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. Itedpsycxibefx Aa Eoi total power requirement --- kW weight of the machine ca. 6,1 t