Used Weiler 120 Cnc for sale (205)

Condition: used, Year of construction: 2002, Weiler E90 / 4.5M - CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 pcs. Multifix quick-change toolholders - 1 live centre - Regular servicing by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centres: 4500 mm - Centre height: 450 mm - Swing diameter over bed: 900 mm - Swing diameter over cross slide: 530 mm - Bed width: 600 mm - Travel of cross slide: 590 mm - Travel of top slide: 250 mm - Cross slide length: 1230 mm Knjdpexn Rr Refx Afijc - Cross slide width: 345 mm - Saddle guideway length: 860 mm - Tool shank cross-section (height/width): 40 x 40 mm Spindle: - Spindle nose according to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle internal taper, metric: 140 mm Main Drive: - Spindle nose according to DIN 55027 size: 11 - Total speed range: 1 - 1120 rpm - Speed range gear stage I: 1 - 350 rpm - Speed range gear stage II: 4 - 1120 rpm - Drive power at 60%/100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 - 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill internal taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 - 400 mm - Inch threads: 1/4 - 56 TPI - Module threads: 0.125 - 28 mm - DP threads: 1 - 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Total length: 6900 mm - Total width: 2600 mm - Total height: 2120 mm - Machine weight: 10,500 kg

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, 16-position turret – all stations driven, shank diameter 25 mm, driven tools up to 4,500 rpm, part tray, accessories, driven tool holders, fixed holders. Knsdpfjxnna Sex Afioc

Year of construction: 2007, condition: ready for operation (used), Swing diameter over bed/cross slide: 1100mm/730mm, turning diameter: 1130mm, spindle bore: 128mm, rapid traverse: 5m/min, quill diameter: 140mm, quill stroke: 300mm, center height: 550mm, distance between centers: 3000mm, max. workpiece weight: 6000kg. Machine dimensions X/Y/Z: approx. 6700mm/2600mm/2300mm, weight: approx. 10500kg, control: Siemens, operating hours: 67647h. Documentation available. An on-site inspection is possible. Expected to be available from 2026. Knodsxph N Nspfx Afioc

Condition: excellent (used), Year of construction: 2014, operating hours: 7,690 h, functionality: fully functional, turning diameter over cross slide: 560 mm, turning length: 530 mm, turning diameter: 240 mm, spindle speed (max.): 5,000 rpm, For sale: CNC lathe, brand Weiler, model DZ 65. The machine is equipped with 12 driven tool stations and is in excellent condition with low operating hours. Package including accessories available for a total price of €65,000. Technical data: Year of manufacture: 2014 Control: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45° slant bed Height of spindle center above floor: 1130 mm X travel: 207.5 mm Face length tip: 745 mm Z travel: 530 mm Turning diameter: 560 mm Rated power at 1000 rpm: 27 kW Spindle speed range: 50–5000 rpm Torque: 260 Nm Max. chuck size: 200 mm Spindle bore: 77 mm Spindle diameter at front bearing: 120 mm Bar capacity in draw tube: 65 mm Tailstock NC controlled Center taper: MK 4 Power: 4 MK Torque: 9.5 Nm Longitudinal travel: 525 mm Z-axis travel: 530 mm X-axis travel: 207.5 mm Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tool positions: 12 Tool shank cross-section: 20 x 20 mm Kedpfjuxc Tcsx Afijnc Tool holder: VDI 30 Dimensions: 3180 mm x 2050 mm x 2200 mm Weight: 6300 kg Additional information: - Bar feeder hardware is pre-installed but requires activation - Supplied with chip tray only, chip conveyor available from Weiler - Equipped with oil skimmer - Offer does not include tool holders and collets, but these can be included upon request Transport and loading can be arranged at extra cost, Europe-wide. Prices are plus VAT. Inspection possible by appointment. Please contact us – our team is happy to support you. Trade-ins or exchanges possible! Machinery purchase/sale BUY/SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2003, turning diameter 0240 mm turning length 525 mm control 840 D Siemens centre height 120 mm turning diameter over bed 450 mm turning dia. over face-slide 300 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 21,5 kW usable bar diameter 42 mm travel -x axis 210 mm Ksdpfxsw U Eife Afisnc travel -y axis 80 mm travel -z axis 525 mm number of toolpositions 16 pos. tool taper VDI 30 Shank diameter 20 x 20 mm rapid traverse X: 24 / Z: 30 m/min Feed force 4,5 kN total power requirement 30 kVA weight of the machine ca. 5 t dimensions of the machine ca. 5,0 x 2,2 x 1,8 m CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and live tooling. We supply an IEMCA VIP 80 bar loader along with the machine and many accessories.

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, For sale is a robust and precise cycle lathe WEILER E90 x 4500, year of manufacture 1999, featuring a large swing diameter and cycle control – ideal for heavy workpieces up to 6000 kg. The machine is in technically good condition and was most recently used in industrial production. It is perfectly suited for single-part and small-batch manufacturing of large components. The machine is equipped with cycle control, a steady rest, and a tailstock with large quill travel. Kodpow Idx Sjfx Afisnc

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 120160, turning length: 925 mm, turning diameter: 480 mm, total height: 1,990 mm, total length: 3,350 mm, total width: 1,800 mm, power: 0.032 kW (0.04 HP), Equipment: documentation/manual, From trade-in from a long-standing existing customer Knedpfxeqy Edgj Afijc

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg Ksdsw A Sqmopfx Afijnc total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle controlled

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Kedewmqkyspfx Afionc Year: 2003 Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Fixed Steady

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Kjdpfx Afev Nhxzoisnc Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: used, Year of construction: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - rotating center point MK5 - Mulifix B quick-change holder incl. 10 tool holders - Switch-on time 32582 h - Year of manufacture 1997 - incl. operating instructions and technical documentation Technical data: Working range: - Tip width: 1000 mm - Center height: 280 mm - Circumferential diameter over bed: 570 mm - Circumferential diameter over facing slide: 340 mm Knodor Hrq Dopfx Afiec - Bed width: 350 mm - Movement of the facing slide: 340 mm - Movement of the top support: 140 mm - Slide gate length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning tool cross-section (height/width): 32 x 25 mm Turning spindle: - Spindle head according to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Inner taper of the main spindle: metr. 70 Main drive: - Drive power 60% / 100% ED: 15 / 11 kW - Max. Torque at the turning spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gear stage I: 1 - 625 rpm - Speed range gear stage II: 4 - 2500 rpm Feed drive: - Type: Three-phase servo drives - Feed range longitudinal and planar: 0 - 10 mm/rev - Feed force longitudinal: 9000 N - Feed force planar: 7000 N - Input speed longitudinal/plane: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Inner taper of the quill: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch thread: 1/4 - 56 G/1" - Module thread: 0.125 - 28 - DP thread: 1 - 224 Machine dimensions: - Dimensions WxHxD: 2850 x 1750 x 1815 mm - Weight of the machine: 2950 kg

Condition: ready for operation (used), Year of construction: 1996, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, Weiler Voest Alpine E50 lathe Ksden Hp T Aspfx Afisnc Comes with 3-jaw chuck and 6 multifix tool holders

Condition: used, Year of construction: 2000, Technical details: turning length: 750 mm turning diameter over bed: 330 mm turning diameter over slide: 160 mm spindle bore: 42 mm turning speed range: 1 bis 4500 U/min drive capacity - spindle motor: 10 kW diameter of quill: 50 mm Kodexp I E Dspfx Afienc quill stroke: 130 mm control: Weiler Zyklensteuerung D2 rapid travel - longitudinal/face: 8 m/min weight of the machine ca.: 2100 kg PARAT toolholder basicsystem prepaired for collets 3.chaw-chuck SCHUNK Rota S plus D = 200 mm Yuear of teh Machine 2000, complet retrofitted in 2018 for € 53.000.- Original Invoice exists Control-Update new D2 - V2.07 Machine in very good condition Machine under power *

Year of construction: 2006, condition: ready for operation (used), This Weiler DZ65 was manufactured in 2006. A horizontal turning machine featuring a chip conveyor, counter spindle, extraction system, interface bar feeder, and an in-machine puller for 1m bars. It also boasts an enlarged coolant tank. Consider the opportunity to buy this Weiler DZ65 horizontal turning machine. Contact us for more information. Application Types Turning Kedjxp Sp Hopfx Afijnc

Condition: used, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm Knedpjxg Nhnjfx Afisc turning length: 1000 mm switched on hours: 37917 h centre distance: 1000 mm swing diameter over bed: 570 mm swing diameter over face slide: 340 mm centre height: 280 mm spindle bore: Ø 66 mm revolution per minute: 1 - 625 steples U/min max. torque on the spindle: 1600 Nm longitudinal feeds:: 0 - 20 mm/U cross feed: 0 - 20 mm/U tailstock quill adjustment:: 160 mm tailstock quill: MK 5 mm total power requirement: 20 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,9 x 2,28 x 1,8 m Machine has been overhauled/refurbished: Ball screw Z overhauled, X-axis end position overhauled, new paint job. Conventional design with integrated automatic cycle control. Metric thread cutting, inch threads, DP threads. Chip conveyor not available. 4-jaw chuck with steady rest available. 3-jaw chuck mounted. *

Year of construction: 1973, condition: excellent (used), turning length 125 mm Knodpfx Ajxpxqwjfijc weight of the machine ca. 0,4 t

Condition: used, Year of construction: 1997, - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 Kjdpfxswnh I Se Afienc - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm turning speeds 25-5000 U/min centre distance 650 mm Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via Kjdpfx Aexn Txajfijnc potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Knjdpfx Afsv Ifxisisc Inch thread,

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Ksdpfsxp Rvlex Afienc

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 1.000 mm swing diameter over bed: 570 mm centre height: 280 mm centre distance: 1000 mm switched on hours: 26668 h spindle bore: Ø 66 mm revolution per minute: 1 - 2.500 U/min max. torque on the spindle: 1.200 Nm longitudinal feeds:: 0-20 mm/U cross feed: 0-20 mm/U diameter of quill: MK5 Taper tailstock quill adjustment:: 200 mm total power requirement: 30 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,85x2,29x1,9 m Kodpfxjwtc T Te Afisnc Cycle controlle lathe equipment: -revolving tip (quill) -chip conveyor -cooling water unit manufactor Mayfran *

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left Knjdpfx Afjxndblsioc - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Knsdoxp Ru Uspfx Afioc

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) Kodpfx Aoxndbfsfionc particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts Knsdpfx Ajxnda Uofiec - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions