Used Weiler Md 260 for sale (182)

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Lsdpfx Ahsxqqmtovohd

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm Ledpfx Ajxv A I Tohvshd incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Year of construction: 1973, condition: excellent (used), turning length 125 mm weight of the machine ca. 0,4 t Lhodpfxsxpxqwo Ahvod

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Lhodpfxjyu Ilij Ahved Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm Lodpfx Aexw H Dbehvohd - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 Lhsdpfx Ahswa Dz Esved spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Lhsdpfehtnu Tox Ahvsd

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Lhodsywpcispfx Ahved

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system Lsdoyg Rfijpfx Ahvjhd - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: ready for operation (used), Year of construction: 2002, Lead and feed screw lathe / WEILER COMMODOR 230 AC - CE marking - Year of manufacture: 2002 - Center height: 230 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Distance between centers: 1000 mm - Spindle speeds: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: metric / imperial / module etc. - Spindle nose DIN 55027 / size 6 - Tailstock taper: MT 4 - Drive power: 11 kW - Electric chuck guard - Multifix toolpost with inserts - Three-jaw chuck Ledpfoywtiyjx Ahvjhd - Chip guard with work light - 2x Emergency stop - Coolant system - Machine feet - Documentation Dimensions (LxWxH): 2.6 x 1.1 x 1.6 meters / Weight: 1900 kg Errors and omissions excepted.

Condition: good (used), Centre height: 125 mm Lhsdpfxoyu R H No Ahvjd Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. We can overhaul a machine from you or deliver a machine from us. Lhodpfefhnr Iox Ahvod

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Lhodpfx Ahoyah Rvjvjd Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical Data Center height: 140 mm Distance between centers: 500 mm Spindle bore: 40 mm Bed width: 205 mm Spindle speed, stepless: 30 – 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Overall dimensions LxWxH: approx. 1400 mm x 935 mm x 1550 mm Ljdpfx Asyuy D Rjhvohd

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate Lsdpfx Ahsyuyruevshd - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Lhjdpfx Aeyucf Rjhvod Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Lhodpfx Aheyucd Tsvjd Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Lsdpfxoyub Sps Ahvehd Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1991, L & Z leadscrew lathe WEILER COMMODOR B - GS certification - Heidenhain 3-axis digital readout - Centre height 180 mm - Centre distance 1000 mm - Spindle bore 56 mm - Spindle speeds 15 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / Metric / Inch / Module / Diametral Pitch - Chuck guard - 2 x Emergency stop - Multifix quick-change system with holders - Three-jaw chuck - Chip guard at rear - Coolant system - Documentation included Dimensions (LxWxH): 2.3 x 1.2 x 1.7 meters / Weight 1600 kg Ljdpfx Aheyvry Usvshd Errors and omissions excepted.

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min Ljdpfjycxibox Ahvohd 12 Stk. total power requirement --- kW weight of the machine ca. 6,1 t

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm * Distance between centres 500 mm * Speed: 15 / 3550 rpm * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 Ledpfxoytd U Re Ahvshd * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Lhodpfx Aoytd Ukjhvod Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * Several collets * 3-jaw steel chuck Rhom with 2 sets of jaws * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: ready for operation (used), WEILER Condor VS 2 from university (test laboratory) - Guides "as new" - Centre height: 165 mm - Swing diameter over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28–2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Threading / metric / imperial etc. - Collet quick-change system incl. collets - Four-jaw chuck Röhm - Faceplate - Chuck guard - Multifix toolpost with inserts - Emergency stop - Documentation Lsdpsyu Hl Isfx Ahvehd Dimensions (LxWxH): 2 x 0.8 x 1.6 m / Weight: 900 kg Subject to errors and input mistakes.

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Lodoyr R Dcepfx Ahvehd Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment Lhedpfxoyaimfo Ahvsd • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm