Center lathe
Weiler Praktikant 160B

Name: Weiler Praktikant 160B
Brand: Weiler
Price: 20500 EUR
Availability: InStock

ONO plus VAT

€20,500

Year of construction

1992

Condition

Used (fully functional)

Location

Ubstadt-Weiher Germany

Machine data

Machine type:: Center lathe

Manufacturer:: Weiler

Model:: Praktikant 160B

Year of construction:: 1992

Condition:: used

Functionality:: fully functional

Price & Location

ONO plus VAT

€20,500

Location:: Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Call

Details about the offer

Listing ID:: A22149762

Update:: 18.06.2026

Description

Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop!

Technical data:

>> Year of manufacture 1992, Machine No. 92-160-2994
>> Center height 160 mm
>> Distance between centers 650 mm
>> Spindle speeds: from 24 to 2500 rpm
>> Spindle bore 40 mm
>> Short taper spindle head, DIN 55027, size 5, with bayonet lock
>> Tailstock, MK 3
>> Feeds from 0.02 to 0.63 mm/rev
>> Possible threads: metric, inch, module, and diametral pitch
>> Metric thread pitches from 0.25 to 8 mm
>> Weight approx. 680 kg
>> Spindle brake, switchable
>> Length 1.6 m, height 1.25 m, depth 0.7 m

Accessories and equipment:

>> 3-axis digital display from K&C with operating manual
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction
Nsdjzd Tycepfx Af Sowl
>> 3-jaw chuck 160 mm with 1 set of jaws
>> Tool clamping system with 2 steel holders
>> Bed stop
>> Centering point
>> Coolant system
>> Rear panel
>> Machine feet
>> Electronic spindle protection
>> Operating manual

Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge.

For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears.

About the machine:

Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2007

91 listings online

Call

Send inquiry

Telephone & Fax

+49 7251 ... show

Fax:

These listings may also fit your interest.

Listing

Dreieich

18,560 km

Center Lathe
WEILERPraktikant 160 B

Call

Condition: used, Year of construction: 1999, turning diameter over bed 330 mm turning diameter over slide rest 195 mm turning length 750 mm center height over bed 160 mm centre distance 650 mm digital readout 3 Achsen HEIDENHAIN bed width 205 mm spindle bore 36 mm spindle taper KK5 DIN 55027 turning speed range 48 - 2500 U/min power requirement 3,0 kW 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 100 mm voltage 400 V total power requirement 3,2 kW Nwsdpfozy Sb Dex Af Sel weight of the machine ca. 680 kg dimensions of the machine ca. 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point

See details

Listing

WIG welding unit, WIG welding machine, WIG and electro DC welding unit, E-welding machine also suita L-TEC TIG 200 DC

Hessisch Lichtenau

18,422 km

WIG welding unit, WIG welding machine, WIG and electro DC welding unit, E-welding machine also suita
L-TECTIG 200 DC

€770

Fixed price plus VAT

Call

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Nwsdpfx Asdzqb Eef Sel Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

See details

Listing

Feucht

18,450 km

Center lathe
WEILERPraktikant 160 B

Call

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Nwsdpszy Ngqefx Af Sol Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

See details

Listing

Ensisheim

18,782 km

Parallel Lathe
WEILERPraktikant 160 B

€12,400

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Nodpfx Afjzwcn No Sjwl Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

See details

Listing

HEDELIUS mod. CB80 MAGNUM Hedelius CB80 MAGNUM

Cuggiono

18,798 km

HEDELIUS mod. CB80 MAGNUM
HedeliusCB80 MAGNUM

Call

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Nwodpev Sdc Uefx Af Sjl

See details

Listing

Kaufungen

18,422 km

Center lathe
WeilerPraktikant 160 B

Call

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Njdpfozq R Ecex Af Sowl Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

See details

Listing

Lathe including accessories Weiler Praktikant 160B

Ebenweiler

18,640 km

Lathe including accessories
WeilerPraktikant 160B

€8,900

ONO plus VAT

Call

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Nwsdpfx Afsy D N Dao Sol Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

See details

Listing

Pillar Drilling Machine ALZMETALL AB3ESV

Germany

18,261 km

Pillar Drilling Machine
ALZMETALLAB3ESV

Call

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. Nwedpfxeu Idkzj Af Sel *

See details

Listing

Kaufungen

18,422 km

Center lathe
WeilerPraktikant 160 B

Call

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Nwjdpfxew Sdr Ho Af Ssl Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

See details

Listing

Iserlohn

18,518 km

Center lathe
WEILERPRAKTIKANT 160 B

€7,750

ONO plus VAT

Call

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Nwedey Rpr Rspfx Af Sol Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

See details

Listing

Lead/traction spindle lathe WEILER Praktikant VC - Teilüberholt

Ubstadt-Weiher

18,621 km

Lead/traction spindle lathe
WEILERPraktikant VC - Teilüberholt

Call

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Nedpfxewhx I Ns Af Sowl Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

See details

Listing

Lead/traction spindle lathe WEILER Praktikant 160 B

Feucht

18,450 km

Lead/traction spindle lathe
WEILERPraktikant 160 B

Call

Condition: reconditioned (used), Year of construction: 1990, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled Newly painted RAL 7035 light gray Nwjdpfxjhy Tdys Af Sjl Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric inspection with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - Covered guide and lead screw - Brake motor - Coolant system - Electrically secured chuck guard - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual With warranty Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

See details

Listing

Lead/traction spindle lathe WEILER Praktikant 160 B - Teilüberholt

Ubstadt-Weiher

18,621 km

Lead/traction spindle lathe
WEILERPraktikant 160 B - Teilüberholt

€21,500

ONO plus VAT

Call

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Nwsdpfx Afjwhzdmj Sel Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery

See details

Listing

Soerendonk

18,619 km

Lathe
NHH1N611N

€3,250

Fixed price plus VAT

Call

Listing

Lead/traction spindle lathe Weiler Praktikant 160B Geometrisch Überholt

Ubstadt-Weiher

18,620 km

Lead/traction spindle lathe
WeilerPraktikant 160B Geometrisch Überholt

Call

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm Nwodovrdlcepfx Af Ssl >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

See details

Advertise here

Center latheWeiler Praktikant 160B

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Center lathe
Weiler Praktikant 160B