Lathe-conventional-electronic

WEILER MATADOR VS 2

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Lasdpfxsy T Hqcs Ac Isb Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent. Laodpouddcajfx Ac Ieb

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev Ledpfoy Tmkvjx Ac Ieab >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Swing over bed: 295 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Laodpfey Hi A Ijx Ac Ieb Inspection under power possible in 5023 Salzburg. Forklift available for loading.

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Ljdpfx Acsyuy D Rj Ijab Tailstock taper: Taper DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 3-jaw chuck 4-jaw chuck Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Lasdpoyylq Ujfx Ac Isb Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Lodpfx Aoyylqhoc Isab Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Ljdjxtnn Tspfx Ac Ijab Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: Ledoyyb T Sepfx Ac Ijab >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Lajdpfxjx Sqvge Ac Iob

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg Lajdpfx Astqqllec Iob quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min Lasdpfx Acoxnda Uo Isb total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions