Used Weiler Md 260 for sale (175)

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet Pgjdpfx Aoymznhohvoi >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Psdpfx Ajx Urmlehvogi

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop Pgjdpfxsymdyms Ahvsi - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: excellent (used), Year of construction: 1997, CNC Lathe Weiler E 50/1, 1997 Technical specifications: Manufacturer: WEILER Pgodpfsymdw Sex Ahvei Model: E 50/1 Year of manufacture: 1997 Centre height: 280 mm Centre distance: 1000 mm Max. turning diameter: 500 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle speeds: 0 - 2500 rpm Chuck

Condition: used, Year of construction: 1995, turning diameter 720 mm turning length 3000 mm control Siemens 805 turning diameter over slide 430 mm turning speeds 1800 U/min tailstock quill taper MT 6 steady 3 Stück Pedsyqvbdspfx Ahvjgi main drive motor 36 kW z-axis 3050 mm x-axis 410 mm swing diameter over slide rest 430 mm spindle motor 28 kW workpiece weight 3000 kg spindle passage 106 mm 3-jaw-chuck diameter 305 mm total power requirement . kW weight of the machine ca. 6 t dimensions of the machine ca. 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min Podoxmaktspfx Ahvsgi spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with Toolmaker Precision, Year of Manufacture 2003, with 3-Axis Digital Readout ACU RITE, in Excellent Condition, CE Compliant Technical Data: - Year of manufacture: 2003 Machine No. 4391 - Centre height: 160 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Camlock Spindle Nose DIN 55027 Size 5 with Bayonet Lock - Tailstock taper: MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Inch, Module, and Diametral Pitch - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake can be engaged - Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories and Features: - 3-axis digital readout ACU RITE - Quick collet chuck with collets from 3 to 30 mm, incremental by 1.0 mm - Röhm 160 mm 3-jaw chuck with 1 set of jaws - Multifix size A with 3 tool holders - Coolant system - Machine lamp - Electronic spindle guard Pgedjyly Nnepfx Ahvoi - Machine feet - Bed stop - Splash guard - Operating manual and spare parts list About the Machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, year 2003, in excellent condition. The machine comes from a large enterprise and was only used very occasionally. This is a very well-maintained lathe, equipped with spindle safety features. All carriage movements are smooth and consistent. Even at high speeds, the Weiler operates quietly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The Heidenhain digital readout makes work even simpler and more precise. Take advantage of the opportunity to view this machine under power on-site and see its condition for yourself.

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request! Pjdjypbypjpfx Ahvogi

Condition: excellent (used), Year of construction: 2006, turning diameter 330 mm turning length 750 mm control WEILER D3 dia. of quill 50 mm quill stroke 130 mm taper in tailstock-quill MK-3 spindle turning speed range 1-4500 U/min taper in main spindle MK-5 weight of the machine ca. 1400 kg dimensions of the machine ca. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very good condition and can be viewed by arrangement with the seller. - Live chuck with sliding jaws, passage 10–85 mm Psdpfxsx Szpwe Ahvogi - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, with mounting according to DIN 55027/5, with 1 set of basic jaws and hard reversible attachment jaws

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by Heidenhain – Very Good Condition! Technical Data: >> Year of manufacture: 1991 | Machine No.: 3140 Pgsdpfx Ahoylh Ncevoi >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short-taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock taper: MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake selectable >> Motor power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Includes and features: >> Heidenhain 3-axis digital readout >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet About the machine: For sale is a Weiler Commodor lathe in very good, fully operational condition. The machine comes from a state-operated workshop and has seen little use. The Commodor is one of the largest manual lathes manufactured by Weiler – a very robust and powerful machine. The 3-axis digital readout by Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, year of manufacture 1991, 3-axis digital readout, center height 160 mm, center distance 650 mm, spindle speed up to 2,500 rpm, tailstock, collet set, chuck, holder, 1 set of bed guides. Pjdpfeyn Auxsx Ahvjgi

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 2,100 h, turning diameter over cross slide: 200 mm, spindle bore: 66 mm, turning diameter over bed slide: 435 mm, center height: 217 mm, turning length: 1,000 mm, total length: 3,061 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 1 rpm, bed width: 202 mm, For sale: WEILER E40 Precision Lathe – only 2100 hours on the clock, Machine condition as new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and a 1,000 mm turning length. Perfect for workshops needing accuracy and durability. The machine is equipped with standard factory equipment (turning bushings, a lathe center, and PARAT tool holders). Pedsv A Irzjpfx Ahvjgi *The price stated in the advertisement is the net price. The seller is a private individual.

Condition: good (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 1122, For sale is a robust and fully functional Weiler lead screw and feed shaft lathe from 1968. The machine comes from our workshop inventory and was in use until recently. Technically, it is in working condition; cosmetically, it shows signs of use consistent with its age. This is a classic, solidly built toolmaker's lathe of proven German industrial quality. Ideal for workshops, training, maintenance, or small manufacturing businesses. Pedpfx Ahsynwiwevjgi —— Condition • Used • Fully functional • Not refurbished • Age-related signs of wear —— Special Features • Heavy-duty construction • Renowned Weiler quality • Simple, low-maintenance technology • Ready for immediate use —— Location & Handover Location: Eisenach Collection preferred. Loading by arrangement possible. Sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Pgsdpfxoihig Ie Ahvei Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1994, functionality: fully functional, turning diameter: 410 mm, spindle bore: 54 mm, rotational speed (max.): 3,000 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,500 mm, workpiece weight (max.): 700 kg, overall weight: 2,100 kg, For sale is a Weiler E35 lathe. The machine is in good condition and fully operational. Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Centre height: 200 mm Between centres: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over cross slide: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions (approx.): 2,200 x 1,500 x 1,800 mm Weight (approx.): 2,100 kg Transport and loading can be organized Europe-wide for an additional charge, upon request. Podexu Ehgepfx Ahvjgi Prices are exclusive of VAT. Inspection possible by prior appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), e.g. suitable for a high-performance lead and draw spindle lathe WEILER 300 or others Pjdpfew Sfitox Ahvogi For spindle bores diameter 38 mm with bracket, draw tube and collets Ø 1, 2, 3, 4, 5, 6 (2x), 7, 8, 9, 10, 11, 13, 14, 16, 18, 19, 20, 21, 22, 23, 25 mm and for square bar □ 6, 8, 10, 12, 16 mm, 1 center punch with collet holder, … Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 1992, Lathe WEILER Precision center lathe in ergonomic design The Weiler Ergodor is the first German ergonomically designed lathe. It creates a more humane workplace and prevents health problems. The key feature is that the employee can operate this lathe while standing or sitting. Technical data Center width 470 mm Turning length 430 mm Center height 145 mm Rotation Ø over cross slide 160 mm Rotation Ø over bed 300 mm Spindle head, short taper flange Bayonet mounting DIN 55022 size 5 or Camlock clamping D 1-ASA-4 Spindle bore 36 mm DIN 55022 size 5 Spindle inner taper Spindle speeds Speeds 30 - 3550 rpm S Speeds 15 - 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Face slide travel 150 mm Travel of the top slide 100 mm Feed rates and thread pitches on the gearbox switchable steps 30 Section 2 1.5/3 kW 38 Gear ratio in headstock 3 20 Long feeds 150 mm via change gears 100 mm via toothed belt Face feeds = 1/2 Longitudinal feed values Metric pitches 0.2 - 12 mm Module pitches 0.1 - 4 Dimensions 1450 x 640 x 1500 mm Dimensions 1450 x 640 x 1500 mm Net weight 1000 kg Acceptance according to toolmaker's accuracy DIN 8605 20 Built according to the rules of occupational safety, official test no. A. EM 11 1545/80. Encombrement 1450 x 640 x 1500 mm Psdpfxovgqu Hj Ahvjgi

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Pgodpfx Ahjykca Hsvsi Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Pgsdsx Ngpdspfx Ahvei Machine equipped with: 3-axis digital readout 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: used, Year of construction: 2013, turning diameter over bed slide: 435 mm, turning diameter over top slide: 245 mm, center height: 210 mm, center width: 1,500 mm, overall weight: 1,700 kg, Technical data Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre height: 210 mm Centre distance: 1,500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Stepless speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks, manufacturer Röhm Duro • Multifix toolholder + 10 inserts • Collet chuck Fahrion + approx. 33 collets • Fixed and travelling steady rest • Various live and dead centres + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 digital position display • 3-axis readout for bed, cross slide, and top slide • Tool memory for 16 tools, with one reference point per axis • Summation key for Z and Zo • Switchable between imperial/metric Podpfx Aoykakpehvogi • X-axis traverse as radius or diameter display • Delta key for "distance-to-go" display to zero • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. FCA D-73235 Weilheim Teck – loaded onto truck Pgsdpfxeyiztis Ahvji

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical data: Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Spindle speed: 30 – 3000 rpm Pgodpjx Htf Hjfx Ahvji Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light Pjdpevadqzefx Ahvjgi - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 2009, operating hours: 31,914 h, functionality: unexamined, machine/vehicle number: EK02, turning diameter over cross slide: 560 mm, turning length: 600 mm, turning diameter: 560 mm, spindle bore: 77 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 530 mm, spindle motor power: 27 W, total height: 2,050 mm, total length: 3,900 mm, total width: 2,200 mm, type of input current: three-phase, overall weight: 6,300 kg, chuck outer diameter: 200 mm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellently restored condition. Pjdpfx Asykzw Dehvogi

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: Podpfoyglk Hjx Ahvsgi - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.