Used Weiler E 70 for sale (177)

Condition: excellent (used), Weiler Primus L & Z lathe in top condition with original paint Turning capacity 245 x 450 mm Speed range 60 - 3000 rpm Collet system with lever-actuated clamping and standard draw tube + set of collets 3- and 4-jaw Röhm chucks Rotating centre Röhm, Albrecht quick-action drill chuck Multifix A with 5 tool holders Spindle brake Ndodpfxsx I U Tzo Affjf Condition: very good, runs absolutely smoothly and quietly, guides in perfect shape. Dimensions: L 1.2 m H 1.25 m W 0.55 m Of course, can be inspected under power. Free loaded D - 88433 Schemmerhofen

Condition: used, Year of construction: 2013, Lathe, used Manufacturer: WEILER Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over support: 245 mm Center distance: 1,500 mm Speed range: 20 - 2,000 rpm (2 ranges, infinitely variable) Spindle bore: 52 mm Equipment: - Infinitely variable speed control - HEIDENHAIN 3-axis digital readout - Multifix toolpost + 10 tool holders - 3-jaw chuck RÖHM DURO - 4-jaw chuck RÖHM Ndsdpfox I S I Njx Affef - Collet chuck Fahrion + approx. 33 collets - Fixed and travelling steady rests - Various live/dead centers + drill chuck (see photos) - Coolant system - Documentation The machine was used in-house by a manufacturer of automation technology for their own products. The machine has been tested for basic functions; everything worked except for the spindle brake.

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Nsdpfx Afevgmbvefodf Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Njdpfx Aex E Um Njffodf Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts Ndedew Sdr Hjpfx Affef 3-jaw chuck Emergency stop

Condition: good (used), Year of construction: 2012, turning diameter: 360 mm, CONTROLS .. CNC controls BASIC FUNCTIONS .. number of x/z slides: 1 WORKING RANGE TURNING Ndsdpfx Afex Ewd Dsfjf .. swing diameter (max): 360 mm .. worpiece length max.: 800 mm MAIN SPINDLE .. spindle revolutions (min): 25 /min .. spindle revolutions (max): 4000 /min ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 1400 kg 25 x 25 Toolholder

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 5088, spindle bore: 25 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total height: 1,300 mm, total length: 1,200 mm, total width: 800 mm, overall weight: 700 kg, WEILER PRIMUS GS Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Power connection: 2 kW - Rated current: 4.1 A - Frequency: 50 Hz - Distance between centers: 450 mm - Center height over bed: 130 mm - Swing over bed: 260 mm - Center height over cross slide: 70 mm - Swing over cross slide: 140 mm Nodpfsx Ekm Eox Affedf The machine is equipped with a tailstock, a Multifix quick-change tool post, and a three-jaw chuck by RÖHM, diameter 120 mm. Comes complete with a matching workshop cabinet and appropriate accessories. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Technical College Inventory Technical Data: - Year of manufacture: 1992, Machine No. 92 160 3273 - Center height: 160 mm - Center distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feeds from 0.02 to 0.63 mm/rev - Thread cutting options: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 8 mm - Weight approx. 680 kg - Spindle brake can be engaged - Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Features: - 3-axis DRO by K&C with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction reversal, - Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments - 160 mm three-jaw chuck (with 1 set of jaws) - Quick-change tool post with 4 tool holders - Bed stop - Electronic spindle guard - Rear splash guard - Coolant system - Operating manual, spare parts diagram About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All carriage slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for finishes similar to grinding. Take the opportunity to inspect this machine under power at our premises and see the condition for yourself. Njdpfx Aex Eb D Eoffsdf Immediately available.

Condition: used, total length: 1,500 mm, total width: 750 mm, total height: 1,350 mm, Empty weight: 700 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 150 - Swing over bed [mm]: 300 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 - Bed width [mm]: 210 - Spindle bore [mm]: 36 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 3550 - Transport dimensions: 1500mm x 750mm x 1350mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information Ndjdpfxox D Tlre Affef VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2009, condition: ready for operation (used), General Data Measurements width 2290 Measurements depth 3250 mm Measurements height 1785 mm Machine weight 3850 kg Main Drive Spindle speed range 1 - 2500 Number of axis 2 Workpiece Workpiece drm over bed 570 mm Workpiece drm over support 340 mm Nodpex D Ibbsfx Affjdf Workpiece Y 1000/1600/2000 mm Workpiece Z 280 mm This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 1996, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Lathe WEILER Praktikant 160 AC, year of manufacture 1996, serial number 4057. Swing over bed: 320 mm Distance between centers: 650 mm Swing over cross slide: 160 mm Spindle bore: 35 mm Ndedpfx Asx H Iddsffof Speed: 48 – 2,500 rpm Power: 4 kW Dimensions: 500 x 1240 x 1550 mm Weight: 680 kg

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Ndedex Hz Rqspfx Affef

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical specifications: Centre distance: 450 mm Nsdpfx Aex Htf Hsffodf Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: Nsdsx Eb A Uopfx Affedf For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. Ndjdpfx Afjwhzcpjfjf This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Year of construction: 2005, operating hours: 20 h, condition: ready for operation (used), Control Unit Ndedpfex D I Nfox Affjf Brand SIEMENS Main Drive Spindle speed range 1-4500 Spindle motor power 100% / 60% duty cycle: 7/9 kW Spindle bore 41 mm Tool taper Mk.5 Workpiece Workpiece drm over bed 330 mm Workpiece drm over support 160 mm Workpiece drm 160 mm Tail Stock Pinol diameter 50 mm Pinol way 130 mm Pinol tool taper Mk.3 Tools Type of tool holder Multifix Gr. B or Parat Gr. 2 This horizontal turning machine was completely retrofitted 2020. A Weiler C 30x750, it features a swing diameter over bed of 330mm and a spindle bore of 41mm. The main drive offers a power of 7/9 kW and a torque of 90Nm, with a speed range up to 4500 rpm. If you are looking to get high quality turning capabilities consider the Weiler C 30x750 machine we have for sale. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Contact us for more information. Application Types Turning

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. Ndodpogabvnsfx Affef 1.piece .faceplate Schunk 250mm price:600,-€ Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ spindle head DIN 55027 size 5 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Spindle head DIN 55027 size 5 All parts are in very good condition.

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Nodpfx Afsx Hz N Hofodf

Condition: excellent (used), Year of construction: 2013, CNC Lathe – Siemens 840 D, retrofitted by Weiler in 2013 Turning diameter: 720 mm Turning length: 2000 mm Centre height: 360 mm Spindle bore: 106 mm Speed range: 1 - 1800 rpm Tailstock quill taper: MK 6 Ndjdpfjx Hg Sgjx Affef Max. workpiece weight: 3000 kg Total power requirement: 36 kW Machine weight approx. 5400 kg Space requirements approx. 4200 x 2450 x 2000 mm Equipment: - Chip conveyor - Coolant system - 3-jaw chuck Ø 500 mm - MUTLI-FIX quick-change toolholder - Live centre - Steady rest - Machine lamp

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Ndsdpsx Av Ruefx Affof

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Weiler Praktikant GSD Precision Lead and Feed Screw Lathe with 3-Axis Heidenhain ND 780 Digital Readout, As-New Condition, Year of Manufacture: 2017 Technical Data: - Year of manufacture: 2017, Machine No. MK10 - Center height: 160 mm - Swing over bed: 320 mm - Swing over cross slide: 190 mm - Distance between centers: 650 mm - Spindle speeds: 16 steps, from 48 to 2500 rpm - Spindle bore: 43 mm - Short taper spindle nose: DIN 55027 size 5 with bayonet lock - Tailstock: Morse Taper 3 - Longitudinal feeds: from 0.02 to 0.63 mm/rev - Cross feeds: from 0.006 to 0.2 mm/rev - Thread cutting: metric, inch, module, and diametral pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 1,050 kg - Spindle brake - Dimensions: approx. 1.72 m length, 1.7 m height, 0.89 m depth Accessories and Features: - Heidenhain ND780 digital readout - New collet chuck set, NEW collets from 3 to 26 mm - Schunk 160 mm 3-jaw chuck with 1 set of reversible jaws (wedge bar system) - Multifix size A with 3 tool holders - 1 bed stop - Splash guard - Coolant system - Machine lamp - Operating manual, spare parts diagram Safety Features: - Lockable main switch - Emergency-stop push button - Electrically monitored chuck guard - Automatic disengagement of the respective handwheel when feed is engaged About the Machine: Offered is a Weiler Praktikant GSD Precision Lead and Feed Screw Lathe with a 3-axis digital readout ND780. Year of manufacture: 2017, in as-new condition with original paint finish. The machine is, of course, fully functional and is supplied with a new set of collets. Previously used in a government facility and only rarely operated. Take the opportunity to inspect this machine under power on-site and see its condition for yourself. Nsdpfx Ajx Aiycjffsdf

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 11500 kg Measurements height 2120 mm Control Unit Brand SIEMENS Model 810 D Dimensions Machine Length 5400 mm Main Drive Number of axis 2 Spindle motor power 45 kW Nsdpfxsx D Hz Te Affedf This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Nsdpfx Aeruqzcoffodf

Condition: refurbished (used), The lathe was completely overhauled in 2025: the bed and guides were reground, the machine was fully stripped of paint and powder-coated, everything was disassembled, cleaned, and rebuilt. Finally, the machine was measured and a protocol was created. Extensive accessories are included (13 pcs. Multifix, many replacement jaws, etc.). The original documentation with manual and maintenance reports is available! Ndodex D Aylspfx Affsf

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Spindle speed: 2,500 min-1 Multifix Tailstock Accessories Nodpfxow Sn Iro Affodf