Used Shark 281 Ccs for sale (3,581)

Condition: new, saw band dimensions 2950x27x0,9 mm 2 speeds 36/72 m/min vice opening 285 mm cutting range at 90 degrees: round 250 mm cutting range at 90 degrees: square 230 mm Cutting range at 90 degrees: flat 280x200 mm Cutting range at 45 degrees: around 190 mm Cutting range at 45 degrees: square 180 mm Cutting range at 45 degrees: flat 180x180 mm Cutting range at 60 degrees: around 120 mm Cutting range at 60 degrees: square 110 mm Cutting range at 60 degrees: flat 110x110 mm Nsdpfx Adoh Dmh Hs Nocl Total power requirement 1,5/1,8 kW weight 375 kg Dimensions 1700x1000x1650 mm Equipment: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the saw bow by the by the weight of the saw head. - The lowering speed is infinitely variable. Single cuts can thus be be carried out with uniform feed

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls Ncjdpfoxz Hhzjx Ad Nsl -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: new, Model Name Ncedpfx Adegvkchj Njl Shark 281 CCS

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm Nsdpfx Ajxaa H Isd Nocl capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Nodpfxsfg E H Ij Ad Nscl Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Item number: SH281CCS motor power 1,5/1,8 kW band opening 285 mm band dimensions 2950x27x0,9 mm weight 375Kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230/ 280x200 cutting area 45° right 190 / 180x180/180x180 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description: -Saw band arch, vise unit and base made of resistant cast iron. -Precision degree marking on the cast iron structure -Electrical system (with fully identifiable electrical wiring and low voltage 24 V system) -Switching handle IP 55 for manual cycles (if present) -Rotating scraper brush for the saw band -Closing unit with vice for fast approaching -Accurate stops with adjustment for miter cuts at 0°, 45°, 60° on the left side -bi-metal saw band 2950 x 27 x 0,9 mm -Wrench, instructions for use and instructions for ordering spare parts in the user's language -SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. Nedpfx Adscgbp Io Nocl -CCS (Cut Control System) with (A switch for manual and automatic cutting - B) regulation of cutting speed - C) hydraulic brake with tank - D) end stop for stopping the belt) also available as an option for machines already in production. -Vice with quick adjustment -Hydraulic transducer for belt tension indication -Electric coolant pump for cooling and lubrication of the saw band and manageable coolant tank above the base frame -For the versions with pneumatic vice (MA), the opening and closing of the vice is done with a manual valve (available as an option with pedal control) MEP SHARK 281 SXI evo [Semi-automatic] Part number SH281SXI motor power 1,5/1,8 kW belt opening 285 mm belt dimensions 2950x27x0,9 mm weight 435 kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230 / 280x200 cutting area 45° right 190 / 180x180 / 180x180 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Semi-automatic function: Vise closes and motor starts, saw head lowers for cut, motor shuts off, saw head raises, vise opens. Some features: - New centralized control panel on articulated arm. - Latest generation hydraulic control unit, highly efficient and with low energy consumption. - Base with extractable coolant tank. The machine complies with CE regulations in all areas! For further technical data, please refer to the attached PDF document.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 203240/43, total height: 2,300 mm, total length: 3,300 mm, cutting range round steel at 45°: 320 mm, table height: 880 mm, overall weight: 1,080 kg, cutting range square steel at 45°: 300 mm, power: 1.5 kW (2.04 HP), We are offering our Shark 442 CCS band saw for sale. The machine is in working order. Pick-up only. Nodpfx Aewhkkijd Nscl We are happy to answer any questions you may have.

Condition: new, Model Name Ncedsgvkbcepfx Ad Nol Shark 282 CCS

Condition: new, Model Name Njdpfegvkglex Ad Nscl Shark 281 SXI evo

Condition: new, Model Name Nodpfx Adogvquwe Nocl Shark 332-1 CCS

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut Nsdpfx Adjxaaqts Njcl - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow Nsdpfsw U U Uwox Ad Njcl - Electro-hydraulic opening of the vise

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) Nedpfx Adjxaarkj Nscl - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets Nedpfx Adoxabpws Nscl - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: as good as new (ex-display), Year of construction: 2024, saw band length: 2,950 mm, saw band width: 27 mm, type of input current: DC, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, cutting height (max.): 285 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Ncjdpfx Adoxyywms Nel Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm Njdpfx Adefg E H Re Njcl capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg dimensions of the machine ca. m Nsdpofg E H Njfx Ad Nscl Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm Ncedpofg E H Tofx Ad Nol band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles Nsdpfxjftmxvj Ad Nocl * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, MEP SHARK 332-1 CCS metal band saw with semi-automatic lowering. MEP authorized dealer - please send us your inquiry! Motor power 1.5/1.8 kW Bench opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Ncjdpfjcgbt Rsx Ad Nsl Weight 640 kg Speed 40/80 m/min. Cutting area 0° 300 / 260x260 / 330x260 Cutting area 45° right 260 / 250x250 / 270x200 Cutting area 45° left 200 / 180x180 / 200x160 Cutting area 60° right 180 / 170x170 / 170x170 Cutting area 60° left Description of the MEP sawing machine: Functioning in CCS version: After the material has been advanced and the vices have been closed, the cutting process begins. The lowering is controlled by the saw's own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for feeding the material. Electrical control panel (marked cable connections, operational readiness indicator light, main safety switch provided with padlock, switch or speed selector, emergency stop, thermal magnet protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick-lock mechanism Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw blade. Chip removal brush Adjustable precision stops for making cuts of consistent length. The machine is designed for pallet truck transport. Bimetal saw blade for solid and profile material Tools and operating instructions Motor 1.5/1.8 kW 2 speeds 40/80 m/min. Vice opening 335 mm Saw blade 3650 x 27 x 0.9 Weight 640 kg See image for cutting data For further technical data, please refer to the attached PDF document.

Year of construction: 2018, condition: excellent (used), zwei Linienlichter mit Stromversorgung und je 10m + 3,5 m Kabel Ncedpfxeg Etq To Ad Njl 24 V,60 W , weiss, 6.500 K ,

Condition: good (used), Year of construction: 2022, functionality: fully functional, Metal Band Saw MEP - SHARK 281 CCS Year of manufacture: 2023 Max. vice opening: 285 mm Saw blade dimensions: 2950 × 27 × 0.9 mm Saw blade speed: 36 / 72 m/min (2 steps) Motor power: 1.5 / 1.8 kW (three-phase) Coolant tank capacity: 22 liters Working height: 860 mm Machine weight: approx. 370 kg Dimensions (approx.): W: 1785 mm, D: 1000 mm, H: 1650 mm 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Nsdsxvyiuspfx Ad Nocl Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measurement range: Up to approx. 120 mm Volumetric capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High-resolution, without additional color cameras Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision engineering, reverse engineering, cultural heritage, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: up to 400 kg Max. plate size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: By vertical or quick clamps Mobility: 4 swivel castors with total lock Installation aid: Roller bar for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,220 h, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,545 mm, overall weight: 5,500 kg, controller manufacturer: FANUC, controller model: PC, number of axes: 5, This 5-axis AgieCharmilles FI 640 CC was manufactured in 2008, featuring a robust design with machine dimensions of 2550 × 2700 × 2545 mm and a weight of 5500 kg. It supports a maximum workpiece weight of 3000 kg and dimensions up to 1300 × 1000 × 510 mm. Equipped with collision protection and automatic wire threading, it's ideal for precise wire EDM tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Wire tilt angle: ±30° • Feed rate: 0 – 1500 mm/min • Maximum workpiece dimensions: 1300 × 1000 × 510 mm • Maximum cutting height (in immersion): 510 mm • Standard supply voltage: 380 or 400 v Ncodpfxsyaqcbo Ad Nel • Frequency: 50 or 60 hz • Collision protection: x, y, z, u, v Extra Information Tools Standard wire guide diameter: 0.25 mm Optional wire guide diameters: 0.1, 0.15, 0.2, 0.3, 0.33 mm Automatic wire threading Automatic re-threading Max. threading height: 510 mm Min. hole diameter for threading: 0.6 mm Dimensions Machine Depth 2550 mm

Year of construction: 1998, condition: ready for operation (used), overall weight: 2,200 kg, This KASTO SSB 260 VA-CC-CNC Metal Band Saw was manufactured in 1998. A reliable choice for your cutting needs, it offers precision and durability. Consider the opportunity to buy this KASTO SSB 260 VA-CC-CNC Metal Band Saw. Contact us for more information. Additional equipment • Accessories: 18 saw bands (see photos) Machine Benefits Technical Machine Benefits • Dimensions of the entire system: length 2160 mm /width 2080 mm/ height 2030 mm / total weight approx. 2 200 kg • Total drive power approx. 6. 5 kw/ saw motor approx. 4. 0 kw/ cutting range round 260 mm /cutting area square 260 x 260 mm /smallest diameter to be sawn 10 mm /smallest cut-off length 5 mm • Minimum offcut length single cut 10 mm/ minimum offcut length in automatic mode 110 mm/ automatic material feed single max. 600 mm multiple material feed (up to 9x) 400 mm /belt speed: mm infinitely variable 15 - 125 m/min /cutting feed: infinitely variable /material feed: hydraulic • Automatic feed: with horizontal clamping /material clamping: hydraulic, infinitely variable /clamping force: horizontal vice (sp l) 150 - 800 dan /feed vice (sp ii) 150 - 800 dan Ncedpfeyaii Tsx Ad Nel • Saw blade dimensions 4115 x 41 x 1. 3 mm /saw blade guide: carbide, replaceable /saw blade tensioning: hydraulic saw blade cleaning: hydraulic with easily replaceable wire brush. Driven via flex shaft in the same ratio as the main drive driven. • Supply via coolant nozzle/ volume 100 1/ pump capacity 50 l/min. Extra Information Machine still under power

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Max. sheet thickness (S235): up to 12.0 mm Max. sheet length: 3200 mm Cutting angle: 2° Strokes per minute: 6–20 Back gauge travel: 600 mm Motor power: 15 kW Ncedpsych Imsfx Ad Nol Length: 4000 mm Width: 2100 mm Height: 2100 mm Weight: 9500 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.