Used Wedge Zinc for sale (688)

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 02/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams Duodpfx Acjx H E Hps Non * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2021, next inspection (TÜV): 02/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights Dusdex H E Hcopfx Ac Njn * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: new, * IMMEDIATE AVAILABILITY * Including hydraulically lowerable loading platform / manual hydraulics / braked Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: AVAILABLE IMMEDIATELY! • Permissible total weight: 1,500 kg • Unladen weight: approx. 445 kg • Payload: approx. 1,055 kg • Internal dimensions: 302 x 172 x 10 cm (L x W x H) • Overall external dimensions: 464 x 238 x 70 cm (L x W x H) • Loading edge height: approx. 48 cm • Tyres: 165R13C steel rims • Brakes: Yes • Jockey wheel: Yes, 45 mm with clamp bracket • 100 km/h approval: at extra cost • Including vehicle documentation Standard Equipment: • Multiplex wooden floor – extremely robust • Fixed 10 mm side panels • Corner posts at all corners for e.g. tarpaulin frame • Very stable welded steel chassis • Entire frame hot-dip galvanized by immersion bath • Multiple sturdy cross members for high point load capacity • Loading platform hydraulically lowerable • Mechanical safety lock for pivot axle during travel • With rear drive-on wedge • Additional continuous longitudinal struts welded in • Front storage box • 8 lashing rings within the loading area • Rear number plate holder, can be swung away for loading • AL-KO overrun brake system and parking brake • Coupling head AL-KO • Very stable reinforced V-drawbar • Automatic reversing function • 13-pin plug • Reversing lights • Large dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Centrally positioned jockey wheel with clamp bracket • Registration documents: COC papers Optional Accessories – Feel free to inquire: • 100 km/h speed approval with shock absorbers • Anti-theft device • Spare wheel • High tarpaulin Dedpoydravofx Ac Noun • Additional lashing eyes • Reversing lights • Lashing straps • and much more Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT. - Vehicle title can be sent in advance or temporary registration (Germany) can be provided. - Export registration including customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been certified dealers and repair workshop for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to error, alteration and prior sale -

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. Dedpfjvx Hugex Ac Njun With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: new, Technical data:Rated voltage 230 VRated input 3050 WEdge height 10 - 65 mmSwiveling range 0 - 50 °Edge thickness 0.4 - 3.0 mmHeating time 30 sTemperature max. 520 degrees CelsiusFeed stepless 1 - 5.5 m/minDimension (L x W x H) 220 x 160 x 360 mmConnection compressed air 6 - 10 barInner radius min. 10 mmWeight 10.8 kg Dodpjwi Nt Esfx Ac Njun

Condition: new, Just the right thing for flexible operations. Our small lifting table Pegasus is very maneuverable, versatile and thanks to thefoot pedal easily adjustable to their ideal working stable sheet metal plate allows you to easily deposit evenup to 300kg heavy workpieces. If they need another plate, they can also put on the very simple.4 stable polyamide castors, two of them with locking brake, provide ideal handling. A safety device against sagging of thetable gives them the necessary sense of ner bench made of solid beech with dovetail zinc coating represents the strongest connection that ensures maximum stability andlongevity of the planer bench. The front collet is 520 x 70 rear collet is equipped with a special spindle that guarantees the completely precise and stable guidance of the collet. On the rear tong there are 3 holes for bench hooks and another 13 holes are drilled in the planer bench plate. The 110 mm high front side is provided with 2 bench hook holes, which together with 2 holes in the rear tong can be used forvertical clamping of workpieces. Part of the planer bench is the drawer for storageof tools. Along the rear part of the planer bench is the hatchet tray, which can be used as a shelf, for the currently unusedtools and material remains or for quick hnical data:Lifting table:Load capacity: 300 kgUseful stroke: 610 mmOverall height: 400 mmFrame: 970 x 590 mmGes. Height: 1010 mmWeight: 85 kgWorkbench:Overall length: 1,700 mmWorktop length: 1,485 mmOverall width: 790 mmWorktop width: 620 mmWorktop thickness: 50 mmWeight: 90 kg Dusdpfxsvwfi Ts Ac Nsn

Condition: used, incl. 7 chain sets pneum. air suspension used, top condition, lots of accessories Wigo brand Duodpfx Ajvvnmljc Non Stand machine Chain set 7 pieces Door support Workpiece support can be swiveled down - tilted for wedge-conical holes Suction connection D 60 mm Space requirement approx. 1100 mm x 700 mm x 2000 mm Weight approx. 350 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning Duodpfx Acoydazus Njn - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Dusdpeydanhofx Ac Njn Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: used, Universal Testing Machine PM10 Dsdpfx Acsyc U Ugj Njun Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: - Delivery and commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Dusdpfxjyc U Rbs Ac Njn Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PM3, Universal Testing Machine PM3 (2020) Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, our basic software provides the capability for control and analysis. Duodpoyc U Dbsfx Ac Nen This enables the creation of various test sequences and the generation of test reports. Furthermore, you have the option to further process the raw data in your own programs. Optional: – Delivery & Commissioning – DAkkS or factory calibration according to DIN EN ISO 7500-1 – Grips and fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl. Device features: - Guillotine shear MSB 200 - Cutting capacity as per nameplate: up to 3 mm steel; significantly higher for aluminium - Working length: just over 2 m - Manual backgauge: 750 mm - Side/angle stop - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 m - Sheet thickness for steel: 3 mm - significantly higher for aluminium and zinc - The machine has been used extremely rarely, approximately 1–2 times a month for thin sheets by a lamp manufacturer - Hardly any signs of wear – this condition is rare - The total price is less than half of the current price – the price list shown is from last year! - If you have any questions, please feel free to call briefly - We have this set twice, as well as other models like the Schechtl MAX 200 – 2.5 mm or MA 200 – 2 mm - Current net list price for both machines – see pictures - You will receive an invoice with VAT shown separately - Shipping by forwarding agent can be arranged if desired, forklift available Dsdpfxowfzzte Ac Neun Free loading, as shown in the pictures Inspection and testing possible by telephone appointment Payment in cash on collection – if there is anything else I can do for you, please give me a quick call – thank you Collection should take place within 8 days after the end of the auction. Article number

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Duodpfxeyaatpo Ac Njn Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 1997, condition: ready for operation (used), This SCHRODER-FASTI FASTI 509-40-6 was manufactured in 1997. A Hydraulic shearing machine capable of handling aluminum up to 8mm, steel up to 6mm, and stainless steel up to 3mm. Minimum stop dimension is 15mm. A solid choice for shaping various metals, the SCHRODER-FASTI FASTI 509-40-6 machine we have for sale. Contact us for further details. Additional equipment • Front-operated motorised fence • Right-angled side stop 90° with tilt stop • 2 drop cam stops in T-slot guide • Table extensions with T-slots • Operating tool Machine Benefits Technical Machine Benefits Dusdex U T Haopfx Ac Njn • Minimum stop dimension: 15 mm • Construction: all-steel welded construction • Cutting technology: / double-edged, multi-part blades with 87° wedge angle / stepless cutting length adjustment / cutting gap adjustment (can be read to 1/100 mm using a dial gauge) / cutting line display with silhouette • Drive: hydraulic with oil filling • Control system: o electric control in accordance with din en 60204-1 / operating modes: single stroke, continuous stroke, partial stroke, jogging • Projection on the side stand: 50 mm • Dimensions (approx. ) for 509-40-6: a (total length): 4540 mm /b (table width): 1885 mm /c (table depth): 1645 mm/ d (cutting length): 4300 mm/ h (height of work surface): 2329 mm /k (total machine height): 1430 mm • Side stand projection: 50 mm (standard) • Foundation fastening: composite anchor hva m16x125 with mortar cartridges (drill Ø 18 mm) / concrete strength class min. B25 required. • Cutting performance: shear angle: large angle = lower resistance, higher performance. / small angle = higher resistance, lower power // max. Sheet thickness: o dependent on material strength (see diagram in document). O recommended strip width: 12-15 × sheet thickness for low-torsion cuts Extra Information Machine still under power

Condition: good (used), Planing width 610 mm Sturdy cast iron construction Duedex U Dgdspfx Ac Non Edge jointing fence Auxiliary stop 4 kW, 380 Volt Two-knife wedge shaft Tables fold upwards Machine ready for immediate use

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, cutting length (max.): 600 mm, Automatic Wood Sawing and Splitting with the RM480-E from H&R. Djdpsu Dkufsfx Ac Neun The H&R Wood Processor RM480-E is the ideal assistant for your firewood processing operations. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to its innovative design and powerful hydraulic system, operating this wood processor is significantly simplified—ideal for professional forestry operations and ambitious DIY users alike. Unlike competing models, with the RM480 from H&R, ALL functions are hydraulically operated, allowing for faster and easier workflow. Product Features RM480-E Performance: This processor is equipped with a robust 13 HP electric motor. Alternatively, it is also available with a 15 HP petrol engine (RM 480 B). Log Length and Diameter: Logs up to 3 meters in length can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths of up to 60 cm. Hydraulic System: The machine features a hydraulically lowering saw bar. The hydraulic log clamp ensures secure fixation of the wood during splitting operations. Hydraulic height adjustment of the splitting wedge is possible. You can choose between the included 4-way or 6-way splitting cross—for flexible splitting patterns and individual adaptation to your needs. Conveyor Belt: The new 2.2 m long feed belt makes loading logs easier, while the lateral swivel discharge conveyor makes the removal of split wood effortless. Mobile Operation: The processor—including trailer—weights just 750 kg and can be easily moved by hand thanks to its practical transport frame. Simple Operation: All functions can be conveniently operated hydraulically, enabling long working hours without fatigue. At a glance: • Sawing, splitting, and conveying in a single work step • All functions hydraulically operated • Efficient and powerful motor • Splits wood up to 48 cm in diameter and 60 cm in length • Can handle logs up to 3 m in length (with accessory table even up to 6 m!) Price Electric Motor (13 HP) RM 480 E (net) €7,550.00 Petrol Engine (15 HP) RM 480 B (net) €7,385.71 Additional Options With the optional lift table or a chain conveyor, logs up to 6 meters in length can be processed effortlessly. Technical Details Weight (incl. trailer): 750 kg Shipping cost: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. split wood diameter: 48 cm Max. split wood length: approx. 60 cm Max. log length: 300 cm Motor: Electric, 13 HP Hydraulic oil: 46 Hydraulic connections and control levers are pre-installed, making the machine operational in no time. Take advantage of the powerful and well-engineered technology of the H&R RM 480 wood processor. Order today and make your firewood processing more efficient, safer, and more comfortable!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Djdpou Dnruefx Ac Nsun Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: used, maximum load weight: 37,950 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Telescoping loading area with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and extensions in the lower section * Between the 1st and 2nd axle, one pair of fixed wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) * Recess in the chamfer and projecting into the loading area for accommodating the excavator bucket arm, approx. 2,900 x 750 x 210/290 mm (L x W x H) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 2 pairs of outward folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Incl. 3-part removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t each Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF Landing Gear: * JOST mechanical landing gear with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Painting: * First-class and durable corrosion protection for the standard shot-blasted welded frame provided by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finish in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Included Accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the bulkhead * Yellow-red air couplers on the galvanized connection bar at the front * 4 chocks with brackets on the bulkhead * Mount at the rear area of the gooseneck for aluminum drive-on ramps * Galvanized folding supports under the sloped area of the loading platform * Bracket for a beacon at the rear of the trailer * Yellow reflective tape along the sides, extension, and rear, as per EU regulations * On the gooseneck and rear panel, left and right, a mount for warning signs including socket * Mud flap at the rear of the trailer * Operating manual and description on USB stick * Mount for beacon on the warning signs Duedpoyc Axyefx Ac Nen * European reflective warning panels (red-yellow) at the rear of the trailer * Speed limit stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads, including load chart * On the gooseneck: aluminum side walls and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) * One tool

Condition: used, maximum load weight: 51,800 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 07/2024, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Selection of features. Complete specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm, with rear chamfer approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Area: * Loading area with extendable design, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Recess in the loading area extending into the chamfer for holding an excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) Ramps: * Pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide * Rubber covering * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually, approx. 235 mm outwards and approx. 215 mm inwards Axles and Suspension: * BPW axles and suspension, 1st and 2nd axle fixed, 3rd and 4th axles steering * 3rd and 4th axle with electromagnetic reverse interlock, controlled by reverse gear and manual activation Dsdpfx Aoyc Ax Hsc Njun * Technical axle load: 12,000 kg * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres Brake System: * WABCO EBS-E braking system in accordance with EU regulations Trailer Colour: * RAL 3002 Carmine Red Accessories included: * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power pack to control hydraulic operations * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck: 1 pair plug-in aluminium side walls and rear wall * Mechanical landing legs with 2-speed gearbox and crank handle * Continuous hardwood floor approx. 50 mm thick over the loading area, interrupted between the axles (increases coefficient of friction) * 1 intermediate platform with recessed loading area, approx. 300 mm wide * For the intermediate platform, approx. 300 mm wide, a mechanical lock for securing it on the extension * Extendable (galvanised) side extensions, approx. 230 mm per side (excluding wooden planks) * 1 pair of permanently installed wheel recesses up to the extension, approx. 700 x 410 mm (W x D), in the loading area in front of the 1st axle * Between the 2nd and 3rd axle in the loading area: 1 pair of permanently installed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * Covers for wheel recesses, split in longitudinal direction, with wooden covering and external securing plugs * Control valves for hydraulic ramps on the right side of the vehicle * 1 pair of mechanical rear supports * Super Grip 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the sloped loading area * Includes widening planks to widen the area below the wheel recesses * 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm (L x W x H), straight version, with 2 external side doors and 1 top lid, mounted behind the front wall on the gooseneck * Removable steel-edged widening planks * Centralised lubrication system with 1 pump, BEKAMAX brand, filled with standard grease according to NLGI-2 * 1st axle with automatic lift axle function and traction aid compliant with EU Directive 1230/2012 * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection

Condition: good (used), Year of construction: 1991, Centre height: 285 mm Distance between centres: 1250 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 365 mm Dsdpfjx Upp Rox Ac Neun Spindle bore: 62 mm Bed width: 360 mm Speed range, 24 steps: 11.2 – 2240 rpm Feed rates: 60 longitudinal feeds: 0.06 – 56 mm/rev 60 cross feeds: 0.03 – 28 mm/rev Thread cutting: 60 metric thread pitches: 0.5 – 448 mm 60 inch thread pitches: 56 – 0.0625 TPI Quill stroke: 190 mm Quill diameter: 80 mm Tailstock taper: MK 5 Drive power: 15 kW Dimensions L x W x H: 3500 x 1440 x 1380 mm Weight: approx. 2,600 kg Accessories / Special Features: • 3-jaw wedge bar chuck, SCHUNK 315, with jaw safety lock • Feed and rapid traverse via cross selector switch and pushbutton • Quick-change toolholder system “Multifix” size C • Coolant system • Safety guard for chuck, electrically interlocked Including new slideway wipers Option: - 3-axis digital readout, make K+C - Further accessories such as faceplate, live center, tools, etc. on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: good (used), functionality: fully functional, Year of construction: 2010, SCHECHTL MAZ/310/CNC-MRA-VSP motorized swivel bending machine The motorized swivel bending machine MAZ 310 has a working length of 3100 mm and bends 2.50 mm steel. The MAZ is the strongest and at the same time the most flexible in the team of eccentric machines. Working Length 3100mm. Capacities Steel 2.5mm Aluminium 4.0mm Stainless Steel 1.5mm Copper 2.5mm Zinc 3.5mm Opening height 140mm Dimensions 4410mm length Dedjyczhgopfx Ac Neun 2200mm width 2150mm height 3750kgs weight

Condition: used, empty load weight: 7,400 kg, maximum load weight: 27,400 kg, overall weight: 34,800 kg, axle configuration: 3 axles, first registration: 01/1989, loading space length: 12,800 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, loading space volume: 77 m³, total length: 2,500 mm, total width: 3,750 mm, suspension: air, tire size: 14/80R 20, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, air-suspended, last axle positively steered, ABS (anti-lock braking system), roller shutter, aluminum side bumpers, supports Body: box semi-trailer with roll-up door, last axle positively steered via wedge, was used by the previous owner as a factory-internal semi-trailer (for trade fairs). The trailer is currently being rented out but can be viewed at any time! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Duodpfx Asvhhflec Non - .

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Dodpfx Acsw A Rqfj Nsun Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Djdpsx Tqkmefx Ac Nsun Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE