Used Wedge Zinc for sale (711)

Condition: good (used), clear span: 1,400 mm, total length: 7,510 mm, shelf height: 1,750 mm, Technical data for the pallet racking system: Rack system: Stow Model: Pal Rack NS Technical data for installation: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units á 1,400 mm Number of levels plus ground level: 02 units Scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 HK (hooks) Codpfjw I R Slox Aiiehd Design: header beam Clear opening: 1,400 mm 40x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x shimming plates, used Finish: fully galvanized For leveling rack uprights positioned on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. If transport or dispatch is required, additional costs will be incurred, which can be quoted separately depending on delivery location and scope.

Condition: good (used), clear span: 1,450 mm, total length: 7,760 mm, shelf height: 1,750 mm, Technical details for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical setup data: Number of rack rows: 01 pc. Length per rack row: approx. 7,760 mm Number of bays per rack row: 05 pcs. at 1,450 mm each Number of levels plus ground level: 02 pcs. Currently in stock: approx. 2 sets! Scope of delivery includes: 06x pallet rack frames, used Material color: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal braces, base plates Frames are pre-assembled (bolted construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange Beam type: PNBH0443/1.5 Box profile: 130 x 50 mm Connector: 4 hooks Design: box end beam Clear width: 1,450 mm 40x locking pins, used Cjdpjw I Sx Tjfx Aiiehd Material color: sendzimir galvanized For securing the beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x leveling shims, used Design: fully galvanized For leveling rack frames installed on uneven floors 01x load plate With information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any requested transportation or shipping of this item is associated with additional costs, which can be provided upon request depending on the delivery location and scope.

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of delivery: 01x CS Sigma profile, used Material color: sendzimir zinc-coated Overall length: approx. 4,450 mm Cjdpfx Ajidcg Aeiiohd CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: new, Year of construction: 2026, Offer "Comfort Model": * Equipped with a 4-axis rear stop, BendGuard, CNC-controlled wedge compensation, standard tool set, and hydraulic upper tool clamping – ensuring that tool changes are quick and easy. *The images shown are examples and may not reflect the standard scope of the offer. Please contact us for offer details and further information. About the machine: Do you want to enter the world of TRUMPF bending technology while covering a broad spectrum of possibilities? Then the TruBend 1000 is the ideal machine for you. The focus here is on the essentials: reliability, ease of operation, high precision, and, of course, the highest TRUMPF safety standards. With its robust system design, high-quality components, and an easy-to-understand programming system, the TruBend Series 1000 offers ideal conditions for your entry into the TRUMPF bending world. It is ideal for bending box-shaped parts in small and medium batch sizes. Direct and intuitive operation With the TRUMPF control system, numerical and graphical programming is quick and easy. Chedpfsiwxfiox Aiijd Precise bending Thanks to the 4-axis rear stop, you can position and bend even complex components with precision. TRUMPF quality All over the world, our fast remote service support takes care of your concerns. You can find further technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our 100-year company history, we have been involved in the design of many thousands of sheet metal products, especially in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts for software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We are also happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are at your side with both financial and entrepreneurial challenges.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed truck with loading crane, immediately available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the complete vehicle with loading crane and aluminum flatbed approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720mm x 1820mm x 400mm - Floor panel 18mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m = 815kg, at 4.40m = 575kg, at 5.60m = 400kg, at 6.80m = 300kg, at 8.05m = 220kg - Design according to CE directive (EN 12999) - Swivel range 370° (mechanical swivel range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome-plated - Pressure relief and load holding valves - Emergency stop Cedpfxoywzyge Aiiohd - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling by 30° and 180° - CE, incl. M.O.L. - Load hook and attachment brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs (by 80mm) - Mechanical arm extension, lifting capacity 1.30m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Reversing camera with Carplay, shovel holder, 90° rope, ladder carrier / transport frame for front or rear wall, additional storage boxes available. Subject to errors and prior sale. ... Climate control, automatic climate control, VAT can be shown separately, ASR, ABS, trip computer, electric windows front, electric immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, spare wheel, twin tires, cab: short cab, electric windows, work lights, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, emission sticker: 4 - Green, reversing camera

Condition: new, CNC Panel Saw Wehrmann WT-38/1040 New machine For the conventional cutting of workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil or veneer Panel dimensions + data (finished panel): Length: from 140 mm Width: min. (finished dimension) 38+38 mm Width: max. (finished dimension) 520+520 mm (asymmetrical cutting is possible) Thickness: 8 mm - 40 mm Weight: approx. max. 30 kg Workpiece shape: rectangular Basic structure: - User-friendly combination machine with adjustable zero line - All drives and adjustments are servo-controlled - The machining motors are frequency-controlled. - Stable steel welded construction - Workpiece transport is carried out by means of a transport belt and height-adjustable top pressure. Base machine: - Sound-absorbing/protective hood with safety interlock - The required connection nozzles for an external extraction system with an air velocity of min. 28 m/sec. (underpressure 2480PA) - A compressed air connection incl. maintenance unit. - Integrated control cabinet with cooling unit for operating the machine at an ambient temperature of 10 - 45 degrees Celsius - PC control Beckhoff - Safety and protection devices according to CE guidelines - CE marking Feed rate v= 5 - 40 m/min servo-controlled drive Electronic height adjustment of 5 - 45mm adjustable via Beckhoff servo axis Stop ruler made of Teflon on the right side of the machine adjustable via Beckhoff servo axis Infeed ruler on the left with pneumatically sprung unit adjustable via Beckhoff servo axes Machine equipment: Unit 1: Slitting saw, frequency-controlled Milling stand with column guide and connecting plate Motor Perske 4.4 KW 50 Hz 400 Volt 4500 RPM. Tool holder D = 35 keyway External + internal thread right / left, controllable via servo drive, operating in the same direction, not swiveling with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Saw blade max. 350 mm Cjdpfx Aszvdw Nsiiehd without tools Flow-optimized extraction hoods Unit 2: Saw motor, frequency-controlled Milling stand with column guide and connecting plate Saw motor not controllable, operating in the opposite direction Motor Perske 6 KW 50 Hz 400 Volt 5000 RPM. Tool holder D = 35 wedge shaft with external + internal thread right / left Saw blade max. D400 mm without tools with manually adjustable splitting wedge with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Flow-optimized extraction hoods Beckhoff control technology - PC-based control system with integrated PLC and electronic path control - Virtually unlimited program memory - Operation via keyboard / mouse / touch - Reporting system for operator and error messages - MDE Basic for recording machine data, production time, set-up time, downtime, fault time, quantity and adjustable recording period - Fast data exchange between control and I/O component via EtherCat - Uninterruptible power supply for panel PC - Feed lock for adjacent machines or transport - Powerful panel PC with integrated 15.6 inch display with touch screen, integrated keypad, keyboard and mouse - USB port - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 - Operating system Windows with TwinCat 3 system for real-time control

Condition: new, mileage: 90 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 4,635 kg, maximum load weight: 2,855 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 5,371 mm, loading space width: 2,310 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Fuso 9C18 with aluminum platform body, 5.5m. Loading crane behind the cab, delivery time approx. 4 months. Platform body dimensions can still be modified, loading crane with 3 x hydraulic extensions and remote control. - GSR equipment including reversing camera, lane keeping assist, etc. - Cruise control - Double passenger seat - Climatronic - Duonic (automatic) - Wheelbase: 4.75m - Optional trailer coupling 3500kg Permissible total weight: 8550kg, derated to GG 7490kg, payload approx. 2855kg (Total weight 8550kg possible without modification, then payload approx. 3915kg!) - 1x tool box - Rotating beacons, reversing camera, rear warning lights, optional Aluminum platform body: 5500 x 2380 x 500 - Bottom frame anodized with 8 mounted tie-down points per side - Floor recess 24 mm with Sieveck floor panels 24mm - 13 aluminum cross members (80 mm) anodized - 2 x aluminum auxiliary frames (130 mm, reinforced) anodized - Front wall 800mm, incl. front wall supports - Side walls 500mm, 5 hinges per side wall, removable - Side boards made of 25 mm snap lock profiles - Rear wall: height: 500 mm / foldable, 3 hinges - STANCHIONS: fixed at the front, KTL coated, middle stanchions: foldable, K20, removable at the rear Folding loading crane 8m with 3 x hydraulic extensions mounted behind the cab Loading crane Fassi F70B.1.24e 0711.400 FASSI loading crane F70B.1.24e e-dynamic Design according to CE directive (EN 12999) Base unit: F70B.1 e-dynamic Slewing range 400° All hydraulic cylinders double-acting Piston rods hard chrome-plated Single-knee lever system Electronic overload protection device with FX500 Emergency stop and optical alarm (90% and 100%) FASSI stability control FSC incl. LMB II 6 functions RCH or RCS radio remote control (linear levers) with display and XP system Pressure relief and load holding valves Control block with 5 control valves, operable from one side Separate hydraulic tank (33 l) with filter, mounted on the crane base Extendable on both sides, outrigger width 3.30m, hydraulic Outrigger support swiveling 45° and 180° Standard color RAL 3020 traffic red - all cylinders painted black Cjdpfxszv Nuas Aiiehd Load hook and fastening brackets Driving position: folded transversely to the direction of travel Dead point above the outrigger beam Observe on-board voltage: 12V 06.91 Fassi RCS radio mini - 6 linear levers 08.88 FASSI stability control FSC-M/1 » incl. LMB II 97.17 IE742 connection box 0711.01.12 special outrigger, outrigger width 4.95m » extendable incl. C.80.02.B dead point rotated by 180° (above the pendulum beam) 96.A2 1 LED work spotlight on the pivot arm » mounted 96.A7 LED for 2 support legs, not mounted » (crane) 96.03 Oil cooler type 60/12 max. 60l pump capacity 95.89 Additional charge for stainless steel screws and stainless steel hose clamps 95.85 Additional charge for Dinitrol application (cavities) 04.T0.99 Zinc primer for F65B.0, F70B.0, » F65B.1, F70B.1 1.00 Black parts with KTL coating 8888 Proportionate transport costs 08.32 Slewing valve / load holding valve Slewing cylinder, for all cranes with rack and pinion 9. Special outrigger, outrigger width 4.95m » hydraulically extendable incl. FSC-P 0711.01.18 Special outrigger, outrigger width 4.95m » hydraulically extendable incl. FSC-P OPTIONAL POSITION FSC - P has various working areas, whereby the monitoring of the outrigger width is continuously detected and the corresponding lifting capacity is released. In confined spaces, corresponding loads can also be lifted even with th

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Csdpfjzyzwnsx Aiishd Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,990 kg, empty load weight: 2,010 kg, loading space volume: 12 m³, loading space width: 2,380 mm, loading space length: 6,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Codpfxjztfqlo Aiijhd Body: Roll-off container with double-wing door, approx. 12 m³, multiple archive images available, roll-off container according to DIN 30722-1, external rollers lubricatable, floor 5 mm, walls made of 3 mm steel, spar spacing 750 mm, double-wing door with reinforcement and Dutch door latch, all-around tarpaulin and net hooks, zinc-plated ladder rungs according to UVV on the front, price per unit, with 8 lashing eyes on each side and 2 lashing eyes on the front wall. Painted in anthracite gray RAL 7016! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, Year of construction: 2026, Engine power: 14 HP Splitting force: 20 tons LONCIN engine Starting: Puller and key Operating pressure: 18 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 500 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s 6-arm splitting wedge 22" STHIL guide bar 74-link chain, 0.75 mm Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3.2 m Conveyor belt (outfeed belt): 6800 x 250 x 4 mm 13" tires Engine oil: 0.8 L (10W30/10W40) Hydraulic oil 30 - 35 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (W x L x H) 2150 x 1000 x 1200 mm Machine dimensions 6400 x 1200 x 2200 mm Gross weight 650 kg Features: Cjdpfx Ajzx Amzoiishd Splitting force of 20 tons – effective splitting of larger and harder logs. Combustion engine – independence from the electrical grid, suitable for field use. Hydraulic feed and pressure – stable material guidance and safe operation. Hydraulic cutting and splitting – one machine for two key stages of wood processing. Sturdy construction – durable and stable frame for intensive use. Ergonomy and comfort of use – convenient settings and intuitive operation facilitate everyday use. Universal use – suitable for farms, forestry work and professional woodworking.

Condition: new, Year of construction: 2026, Capacity: 7000 m³/h Motor power: 7.5 kW Voltage: 3-phase / 380 V Net/gross weight: 800 / 900 kg Dimensions (L x W x H): 2965 x 1160 x 3063 mm Material: Flowerless galvanized steel sheet, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2500 - 2800 Pa Filtration area: 45 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance Designed for use in potentially explosive environments Dust collection in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the effective collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate Chodezx A Hbjpfx Aiiod The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated metal flooring, badge_tracstrap Cjdjzy Dgrepfx Aiiohd Features: - Perforated metal flooring - TracStrap securing system - Shovel holder Net price: €7,096.64 / Gross price: €8,445.00 Article number: DPT235371700.23 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 170 x 20 cm • External dimensions (L x W x H): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 826 kg • Payload: 2,674 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, internal sides • Screen-printed plywood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket holder • 10x lashing eyelets on the side panel (1000dAN/kg), TÜV certified • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for immediate use • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist • ALKO overrun device and parking brake • Steel casting tow hitch with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting, and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover at the front, 1x sideboard extension, off-road 185/70R13C tires Equipment: - Steel sideboards - 4x lashing points - Steel cover Net price: €3,689.08 / Gross price: €4,390.00 Article number: KEB210201011.04 Technical data: • Brand: TPV Trailers • Model: KT-EB2-Offroad • Vehicle type: Covered trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 202 x 107 x 102 cm • External dimensions (LxWxH): 308 x 165 x 171 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,000 kg • Tare weight: 367 kg • Payload: 633 kg • Chassis: Low-loader (wheels next to the body) • Tires: 235/75R16 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Sideboards made of 1.5 mm steel sheet with aluminum-zinc coating • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9 mm continuous without joints, non-slip and waterproof • Eccentric locks for the rear door and cover • Galvanized V-drawbar • Aluminum diamond plate fenders, reinforced and walkable • Steel cover with KTL coating and black powder coating, 56 mm high with roof rails, splash-proof • 4 lashing eyes mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • Shock absorbers mounted • 100 km/h manufacturer approval • 2x rear supports mounted • Support wheel with clamping bracket mounted • 13-pin connector • Oversized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Chsdpjzy Dmxofx Aiied Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, Perforated sheet metal floor, Hand winch Equipment: - Perforated sheet metal floor - Tilting loading platform - Approach angle 11° Net: €5,878.15 / Gross: €6,995.00 Article number: MGK335482000.04 Technical data: • Brand: Martz • Model: GT TILTING 480 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 469 x 209 x 0 cm • External dimensions (L x W x H): 689 x 215 x 103 cm • Permissible total weight: 3,500 kg • Unladen weight: 826 kg • Payload: 2,674 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Lohr steel lashing points, ideal for secure lashing, VDI 2700 8.1 certified • In the middle between the lashing points: Aluminum tread plate floor, non-slip and waterproof • Incl. continuous ramp as a wedge at the rear • Hydraulically tilting loading platform (11° approach angle) • Very low chassis for a low approach angle • Very lightweight trailer with a stable design • 4 additional lashing eyes in the side floor • Hand winch at the front with pulley for 3 positions • Braked rubber spring axles from KNOTT • Reversing assist system • KNOTT inertia brake and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting, can be swiveled away • Integrated rear fog light • Lane-keeping lights mounted at the rear • Foldable license plate holder, can be driven over Chodpfx Aijzy Dyrsiod • Automatic support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2026, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Advantage: Quick and easy notching Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Easy to operate Cjdpfxjzzk Ewo Aiiohd With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 4 sets -Jaw width: 20 mm -Attachment: Material: Aluminum Csdpfjzlc Dmsx Aiiehd -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 350/300/H75 mm -Total weight: 9.2 kg

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm Chodezrpufjpfx Aiied material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Mobile paint booths in a container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Chjdpfjwf Dmxox Aiied Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology.

Condition: good (used), Technical data for the pallet racking system: Racking system: META Rack Technical data for installation: Number of rack rows: 01 unit Length per rack row: 20,490 mm Number of bays per rack row: 06 units Number of levels incl. ground level: 02 units The scope of delivery includes: 07x pallet rack frames, used Material finish: Sendzimir galvanized Profile dimensions: P 90 x 65 x 1.50 mm Frame type: PN-15 Including horizontal and diagonal braces, base plates The frames are pre-assembled (bolted lattice construction) Height: 4,500 mm Depth: 1,100 mm 24x pallet rack beams, used Material finish: orange Box profile: 110 x 50 mm Beam type: 110|55 Connector: 4 HK (hooks) Clear span: 3,310 mm 07x upright protectors, used Material finish: hot-dip galvanized Total height: approx. 970 mm Total width: approx. 98 mm Internal width: approx. 92 mm Total depth: approx. 40 mm Material thickness: approx. 3.00 mm Drill hole diameter: approx. 11 mm Number of drill holes: 04 units 48x locking pins, used Material finish: Sendzimir galvanized For securing the cross beams against accidental lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete Chsdpfx Asxbcuksiisd 14x leveling plates, used Version: fully galvanized For leveling rack frames installed on uneven floors 01x load sign With specifications of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Any additional transport or shipment of this item is subject to additional charges, which can be requested from us separately depending on the delivery location and scope.

Year of construction: 2026, condition: new, functionality: fully functional, Universal testing machine PM10 (10 kN) – Complete system including software For sale is a versatile universal testing machine PM10 with a maximum testing force of 10 kN. The system is characterized by its flexibility and efficient stand-alone operation. The machine is ready for use, including evaluation electronics and basic software for comprehensive data analysis. Technical data & performance features • Maximum testing force: 10 kN (including matching load cell) • Crosshead travel: 700 mm • Testing space / installation space: 400 mm • Testing speed: 1 – 500 mm/min • Return speed: 700 mm/min • Path resolution: 0.01 mm • Overall height: 1,230 mm • Weight: approx. 85 kg Highlights & operation • Flexible stand-alone operation: Quick tests can be performed directly on the machine via a numeric keypad, completely without a PC. • Powerful basic software: Machine control, recording of curves, and detailed data storage when connected to a PC. • Open data interface: Easy export of raw data for further processing in your own programs (e.g., Excel). Scope of supply • Universal testing machine PM10 • Load cell 10 kN • Integrated evaluation electronics • Basic software for control and evaluation Optional services & accessories (upon request) Chedpfx Aieyc U Ugsisd • Service: Delivery, professional installation, and commissioning on site • Certification: DAkkS or factory calibration according to DIN EN ISO 7500-1 • Extensive range of clamping devices: Pressure plates, bending and shear devices, wedge and scissor clamps, peeling and screw clamps, as well as pneumatic or hydraulic clamping devices. The machine is available immediately. Please contact us for an individual offer including the appropriate accessories for your testing requirements!

Condition: good (used), Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR600 Technical Data for Installation: Number of rack rows: 01 pc. Length per rack row: approx. 40,680 mm Number of bays per rack row: 01 pc. at 3,600 mm Number of levels plus ground level: 02 pcs. Volume Data: Pallet spaces per bay: 12 pcs. Pallet spaces per rack row: 132 pcs. Total pallet spaces: 132 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Chedpjw Davmefx Aiiod Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: n/a. Scope of Delivery Includes: 12x pallet rack uprights, used Material finish: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, base plates Uprights are pre-assembled (bolted truss design) 3,000 mm height 1,050 mm depth 44x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 HK (hooks) Clear span: approx. 3,600 mm 12x rack protectors, used Height: approx. 750 mm External width: approx. 98 mm Internal width: approx. 92 mm Material thickness: approx. 3 mm Material color: RAL 1021 yellow 88x locking pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 48x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 24x shim plates, used Finish: completely galvanized For leveling uprights on uneven floors 01x load sign With field and compartment load specifications, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipment is associated with additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: used, empty load weight: 7,400 kg, maximum load weight: 27,400 kg, overall weight: 34,800 kg, axle configuration: 3 axles, first registration: 01/1989, loading space length: 12,800 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, loading space volume: 77 m³, total length: 12,850 mm, total width: 2,500 mm, total height: 3,750 mm, suspension: air, tire size: 14/80R 20, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, air-suspended, last axle positively steered, ABS (anti-lock braking system), roller shutter, aluminum side bumpers, supports Body: box semi-trailer with roll-up door, last axle positively steered via wedge, was used by the previous owner as a factory-internal semi-trailer (for trade fairs). The trailer is currently being rented out but can be viewed at any time! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Csdpfx Aijvhhfleishd - .

Condition: new, Pallet rack grating - recessed. The pallet racking grating is an excellent shelf filler that allows us to create an additional picking level in the warehouse racks. It is ideal for stacking stored goods in bulk or in cartons. For an L-270 cm long traverse, 3 gratings are needed. The recessed shelving gratings are suitable for racks with a frame depth of G-110cm. The gratings have a high load-bearing capacity - they do not require the purchase of additional reinforcing beams. The rack gratings are universally applicable and are easy and quick to install. They are ideal for industry, workshops and warehouses. The offer concerns a 500 kg recessed rack grating NEW (MTP001516): Height: 3,0 cm. Width: 89.5 cm. Depth: 99 cm. Weight: 11 kg. Load capacity: 500 kg/m2. Mesh size: 68×50 mm. Finish: zinc-plated. Quantity per pallet: 50 pieces. Price: 24 net euros per piece. The offer concerns a racking grating with a load capacity of 1000kg recessed NEW (MTP001515): Height: 3,0 cm. Length: 89.5 cm. Depth: 99 cm. Weight: 16 kg. Load bearing capacity: 1000 kg/m2. Mesh size: 34×76 mm. Finish: Galvanised. Pallet quantity: 50 pieces. Price €33.60 net per piece. Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * Large quantities available immediately. Chedpfxou Ttc Ie Aiijd * Quick dispatch to the desired location. * Transport costs are not included in the offer. * Transport throughout Europe possible.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/1994, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 800 mm, total length: 13,650 mm, total width: 2,540 mm, total height: 3,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle can be lifted, last axle is forced-steered, lifting and lowering function, ABS (anti-lock braking system), storage box. Chedpfji Rqpqex Aiijd Last axle is forced-steered via wedge. Intended for mounting a roller crane. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Chjdpfxsu Av E He Aiijd