Used Wedge Zinc for sale (701)

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m Nsdpfjy H D Acjx Ahkeda STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: new, Year of construction: 2026, The cross splitting wedge (4-way) is an additional accessory designed for 7-ton log splitters, expanding their capabilities and improving work efficiency. It allows a log to be split into four pieces in a single operating cycle, making the preparation of firewood faster and more efficient. The cross wedge is designed for CORMAK LUP 7T and CORMAK LUP 7TS log splitters. It is made of steel, welded for durability, and protected with a powder-coated finish. Specifications: Length: 130 mm Depth: 110 mm Njdpszwlkaefx Ahksda Overall width: 150 mm Main wedge width: 85 mm Cross knife length: 60 mm Manufacturer: Cormak

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Nedpjui Ifcsfx Ahkoda

Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg Ndedpfxeb A R Tns Ahksa

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 195 mm -Interchangeable jaws -Weight: 12 kg Ndsdpfx Asb A Ihvohkea

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Bolt circle: 172 mm Ndsdpfx Aheb A Rqlekoa -Weight: 90 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -Interchangeable jaws -Cone: 69 mm Nedpob A Ranjfx Ahkjda -Thread: M 95 x 4.5 mm -Weight: 26 kg

Condition: good (used), Steel holder, clamping plate with T-slot, wedge holder Ndedpjwcxfqjfx Ahkea -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Hole size: Ø 216 mm -Recess recording: mm -Bolt circle: mm -Through hole: 50 mm Ndsdpfx Ahjdqck Hokja -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 290 mm -Recess inlet: Ø 268 mm -Bolt circle: Ø 168 mm -Mounting hole: Ø 21/31 mm -Mounting hole spacing: 148 mm Njdsb E N Txepfx Ahkjda -Through hole: Ø 70 mm -Weight: 43.5 kg

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece Nodpfx Ahjvvafyskoda

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers Ndsdpfx Ahjvvagkokoa -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 65 mm -Insertion depth: 40 mm -Dimensions: 565/154/H105 mm -Weight: 20.1 kg

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm Ndodpfodnaz Njx Ahkoa -Exchangeable jaws: -Weight: 25 kg

Condition: excellent (used), Taper shank chuck (28319) Diameter 290 mm Cylindrical shank 78 mm Nedpfx Asiuvumshkoda Taper 6 mm Weight 54 kg

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Ndsdpfozkt I Tox Ahkea

Condition: used, Sormac PO-30 Pepper Decoring, Slicing & Wedging Line Complete Sormac pepper processing line equipped with 4 × Sormac PO-30 pepper coring machines for the automatic coring and processing of bell peppers. This high-performance processing line is designed to deliver high throughput and consistent product quality for the fresh produce and food processing industries. The PO-30 coring machines accurately remove the core and seed membranes, while an integrated vacuum system efficiently extracts seeds and seed residues, ensuring a clean finished product with minimal product loss. The line is equipped with infeed and outfeed conveyors, providing a continuous and efficient product flow. It is suitable for processing red, yellow, green, and orange bell peppers, making it ideal for the production of fresh-cut vegetables, vegetable mixes, meal components, and convenience foods. Thanks to its stainless steel construction, the installation is hygienic, durable, and easy to clean, making it perfectly suited for modern food processing facilities. This used Sormac processing line is an excellent solution for companies looking to increase production capacity or automate their bell pepper processing. The combination of four PO-30 coring machines provides high processing speeds, reliable performance, and an efficient production process. The line is currently disassembled. The line consists of: Infeed conveyor with cleats – dimensions (W × L): 600 × 3,500 mm Distribution conveyor with 4 pneumatic diverter valves – dimensions (W × L): 600 × 9,250 mm 4 × Sormac PO-30 coring machines Finished product outfeed conveyor – dimensions (W × L): 600 × 10,500 mm 4 × vacuum units with waste discharge conveyor – dimensions (W × L): 400 × 9,000 mm Central electrical control cabinet Operating principle of the PO-30 coring machine Station 1: The pepper stem is cut off. Station 2: The pepper is cored, and the seeds are removed. Station 3 (optional): The top, the bottom, or both ends of the pepper are cut off simultaneously. Station 4 (optional): The pepper is segmented into 4 pieces. After machine modification, segmentation into 2, 3, 6, or 16 pieces is also possible. Technical Specifications Production capacity: Up to 11,200 peppers/hour (depending on product, quality, and operator) Product diameter: 60–115 mm Njdpfxjzkb Two Ahkeda Product length: 70–140 mm Functions: Coring, cutting, segmenting Power supply: 400 V (3 + N, 50 Hz) Power consumption: 6 kW Year of manufacture: 2020 Compressed air requirement: 6 bar (1,600 L/min) Overall dimensions (W × D × H): 15,000 × 4,000 × 3,000 mm

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Ndodjxa D Hrepfx Ahkja

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled New bearings for pressure rollers and motor Nodpfoqvz U Esx Ahkeda new tips opening width: 430 mm

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Ndodpfx Aoyman Hohkoa Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. Ndedpfx Aeq Nw Uqehkea This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP No. 109452 Diameter: 165 mm Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition Nedpfjy Ehypex Ahkjda

Year of construction: 2019, condition: used, Operational machine. Ask for additional information. Second unit as well, vintage 2021. Ndodpfx Ahsy R U H Hoksa

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Nsdpfx Aexpqz Ujhkjda Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: used, 3-jaw wedge-bar lathe chuck FORKARDT TYPE F+160 Njdef Axpropfx Ahkeda No. 1659 181 Identical to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022, size 6 1 set of chuck jaws consisting of base jaws and hardened step jaws for turning 1 set of chuck jaws consisting of base jaws and soft step jaws for turning - central adjustment Weight: 11 kg Good condition

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Nodpfx Ajxcbmhohkoda Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056