Used Segmented for sale (860)

Condition: excellent (used), Year of construction: 2021, Segmented sheet metal bending machine for up to 2 mm thickness, length 1370 mm. Ljdpsxlqycefx Ab Uehn

Condition: reconditioned (used), SIMEC strip polisher with 8 heads on belt, working width 2000mm, thickness 100mm. Suitable for marble and granite. Includes tilting roller loader and roller table. Capacity: 2000mm x 100mm. Very good condition, serviced. Machine dismantled and loaded onto truck. Contact by phone in French, by email in your language. Lhodpfxoxb D Npj Ab Ujn

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Lhodpjv Tyr Ijfx Ab Uon Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm castors incl. Delivery date: every week Lhedshunv Iepfx Ab Uen We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Lodpfx Absqxande Ujhn Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 32 mm Lsdeww Ec Espfx Ab Ushn -Number: 3 sets of top jaws available -Price: per set -Dimensions total: 90/95/H55 mm -Total weight: 2.1 kg/set

Condition: like new (used), functionality: fully functional, SICK C2000 C20S-045102A11 Sensor Lightning Small and compact, economical and convenient Lodpeu Rqybjfx Ab Uehn The C2000 Standard safety light curtain is used wherever hazardous points and hazardous areas need to be safeguarded reliably and economically. C2000 is designed for use in simple applications with low hazard potential - its robust design and high signal reserve are also suitable for use in harsh environmental conditions. The integrated EDM (External Device Monitoring) function enables cost savings in system design and offers the advantage of on-site display. Time-saving alignment and diagnostics are carried out using the tried-and-tested 7-segment display. In addition, sens:Control devices, accessories and service concepts round off the product range and form industry-compatible solutions as a complete package.

Condition: used, tank capacity: 10,500 l, Location: Bremen Condition: used Volume: 10,500 liters Max. overpressure: 1.5 bar Tank Max. operating temperature / °C: 20 °C Design: vertical Tank Lsdpfx Asxqcn Njb Ushn Support type: height-adjustable feet Number of feet: 3 pcs Internal diameter: 1,500 mm Cylindrical height: 5,500 mm Total height: 6,800 mm Technical data / Dimensions Bottom wall thickness: 2.5 mm Shell wall thickness: 2.5 mm Technical data / Dimensions Top wall thickness: 2.1 mm Technical documentation: drawings, TÜV documents, various papers Features Manhole / Dome: in cylinder (approx. 350 x 450 mm) Nameplate: Equipment: spray head, crane lugs Features Outlet: DN80 DIN 11851 Note: pressure marks on cylinder Remarks: 1 stainless steel sheet inside lower base (see photos); wall thickness of lowest cylinder segment: 3 mm Previous use: brewery Product-contact material: V2A 1.4301 (AISI304) Material properties Foot material: stainless steel

Condition: excellent (used), Year of construction: 1992, width 52 cm age 1992 flat pile feeder with suction head counter MCS 106 Ledpfx Abokxcv As Uohn 4 folding pockets in the parallel fold section segmented folding rollers following knife shaft 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold stream delivery delivery time: immediately from stock

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch Ljdju Ictbopfx Ab Ushn *

Condition: excellent (used), CATALOGUE NUMBER 7244 TECHNICAL DATA - max. width of the processed element 800mm - max. thickness of the processed element 160mm from above: - smooth sliding roller - pawls - pulling shaft, toothed, divided (segmented, sequential) allows simultaneous planing of several elements - 2 rows of pressure Lodporfb Nvjfx Ab Uohn - pulling shaft, toothed, divided (segmented, sequential) - pressure - planing shaft 810mm, 4 knives, 18.5kW - pressure - pulling shaft smooth, metal from below: - adjustable preliminary table with sliding roller - sliding roller - planing shaft 810mm, 4 knives, approx. 10kW - 2 pulling rollers, smooth, metal, adjustable - metal roller, sliding - electric lifting of the table top - smooth regulation of the feed speed 7-40m/min - engine approx. 2.2kW - diameter of the exhaust port 200mm, 180mm - dimensions length/width/height 1950x2100x1700mm - weight approx. 2500kg - Czech production - very good condition, - used planer Net price: PLN 34,900 Net price: EUR 8,200 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm Lhedpfx Aboq Ei Ekj Usn -Dimensions: see photo technical. drawing -Quantity: 3x set of interchangeable jaws available -Price: per set -Total dimensions: 70/60/H50 mm / 70/60/H54 mm -Total weight: 1.1 kg/set

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Lhsdpexlcp Nefx Ab Uen Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Lsdpfx Absvvkkae Uohn Storage location: Nattheim

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Lhodpfxsxpxhvo Ab Usn Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2008, condition: used, BVM Compacta 5022 film packaging line consisting of: BVM Compacta 5022 – film packaging machine SC 4530 SD – BVM high-performance shrink tunnel TB400 x 1500 – Bernardo swivel bending machine Dimensions of complete line: 9.00 x 2.00 m Technical data: BVM Compacta 5022 Side sealing machine for shrink film packaging Packaging type: Three-sided sealed packaging with half-tube film Output: Up to 120 cycles/min (depending on product and equipment) Format range: Product width + product height max. 450 mm Sealing width: 500 mm Clearance height: 220 mm Film types: Polyethylene, polyolefin, PVC Film width: max. 650 mm Special features: Servo-controlled sealing platen drive continuously heated sealing systems Quick changeover without hand wheels Touchscreen operation with job memory Shrink tunnel SC 4530 SD – BVM Type: High-performance shrink tunnel Passage width: 450 mm Passage height: 300 - 400 mm Shrink zone: from 800 - 2800 mm Tunnel length: 2385 mm Heating power: from 8.4 - 25.2 kW Connected load: approx. 19 kW Power connection: 400 VDS, 50 Hz Special features: Digital temperature control Adjustable air flow Plastic link belt with water cooling TB400 x 1500 – Bernardo swivel bending machine Type: Manual bending machine with segmented upper beam Working length: 1500 mm Lhjdpfx Aboxpv Rzo Ujn Max. sheet thickness: 1.5 mm (at 400 N/mm²) Max. opening width: 48 mm Bending angle: 0–135° Dimensions (W × D × H): 1820 × 1115 × 1150 mm Weight: approx. 385 kg Special features: Segmented upper beam for flexible bending options Foot pedal for hands-free operation when working on the workpiece

Condition: used, Year of construction: 2019, operating hours: 6,680 h, functionality: fully functional, overall weight: 19,000 kg, power: 390 kW (530.25 HP), Equipment: Basic Package AK560 Eco-Power: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Brake system incl. ABS and lighting according to EC directive - 50 mm EC towing eye with bolt-on shoe - Tyres 385/65 R22.5 - Hydraulically adjustable support leg - Splash guards (inner and side-mounted mudguards) Lsdpfx Ajw Swpfeb Ushn - Permissible total weight 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT IV emission standard - Load-dependent feed control incl. automatic reversing scraper floor - Fuel tank 450 litres - Feed roller: length 1,690 mm, diameter 510 mm, fitted with tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Standard: "Streusel" flail tip - Centrally positioned lubrication strips - Electric pump for operating cylinder functions (e.g. raising/lowering support foot and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off - 24 V electric control system - Separate control box at the rear of the machine - Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, graded on request) incl. tailgate - Scraper floor with 32 slats - Complete remote radio control - Preparation for travel drive - Acoustic start-up warning - Paint finish: RAL2011 deep orange Optional Equipment: - Hydraulic travel drive - Drawbar extension 400 mm - Fuel tank 600 l - Additional hydraulic connection 20 l/min - Flail tip C1 bear paw with tungsten carbide - Fine shredding basket - Impact plate with strike bar - Rear conveyor 4 m - Separate drive for feed roller/scraper floor "Twin Drive" - Reinforcement plates in the loading hopper

Condition: new, Year of construction: 2025, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Lodpfx Aowd Emkjb Ushn Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: used, Year of construction: 1985, Table length: 2500 mm Spindle adjustment travel: 120 mm Table width: 760 mm Design: tiltable Tilting angle forward: +45° Tilting angle backward: -5° Extendable frame support: Yes Speed selection: belt change + pole switching Spindle taper: MK 5 Column material: cast iron Control panel position: top Spindle height adjustment: handwheel and electric Spindle tilt adjustment: handwheel with dial gauge Lhsdpfew Aihpsx Ab Uen Spindle locking: manual Spindle braking: electric Spindle rotation direction: left/right Motor power: 4.7 / 5.7 kW Table opening closure: insert segment Fence jaw design: Aigner jaws Fence adjustment: manual Milling fence scale display: analog scale Cutter jaw adjustment: manual Power feed: yes, 4 rollers (Haffner) Feed adjustment: fixed speeds Dimensions: 2500 x 1500 x 1900 mm Location: Nattheim

Condition: good (used), Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Equipment: Basic package AK 315: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Braking system incl. EBS and lighting according to EC directive - Tires: 385/65 R22.5 - 50 mm EC towing eye incl. slip-on shoe - Hydraulically adjustable support leg - Splash protection (inner and side mudguards) - Permissible total weight 16,000 kg - MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emission standard - Load-dependent control of material feed incl. automatic reversing of drag floor - Hydraulically foldable green waste screen basket with tailgate - Impact plate with teeth - Fuel tank 300 liters - Infeed roller: length 1,420 mm, diameter 510 mm, with attached tooth segments - Two-row flail drum with 16 freely swinging cast steel flail holders and replaceable flail tips and 28 fixed ripping teeth - Standard: "Streusel plus" flail tip - Centrally arranged lubrication strips - Electric pump for actuation of cylinder functions (e.g. lifting/lowering support leg and opening/closing tail basket, folding/unfolding rear conveyor, releasing travel drive) when the engine is off - 24-V electrical control system - Separate control box at the rear of the machine - Drag floor with 29 slats - Chain drive for infeed roller and drag floor - Extended radio remote control with 2 foot switches - Acoustic start-up warning - Rear conveyor 6 m, 1,500 mm wide with anti-magnetic center section - Reinforcement plates (Hardox) on the feed hopper sides (loading edge) on both sides - Travel drive preparation - Fire extinguisher Lhodpfswvub Iox Ab Uon - Doppstadt telematics system - Paint finish: RAL2011 deep orange Optional equipment: - Hydraulic travel drive - Extended radio remote control with foot switch - Flail tips "Bear Claw" - Fine shredding basket - Water spraying system - Lighting package: engine compartment and rear conveyor

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Ljdewd E N Espfx Ab Uohn Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen Lsdpfx Abowmk Ewj Uohn – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: refurbished (used), Year of construction: 2002, Very good condition electric bending machine with automatic backstop and controlled beam. Straight knife on one side, segmented tools on the other. The machine has been updated, with a new Easy link controller, touch screen. Specification: Manufacturer: CIDAN Lhedpfsvyr D Njx Ab Usn Model: K15-25 Combi Year of manufacture: 2002 Working length: 2550 mm Thickness: 1.5 mm Backstop: Automatic 1550 mm Control system: Updated Easy link system Other: Reversible beam, with segmented tools. If you have any more questions, we will be happy to answer.

Condition: used, Year of construction: 2006, Folding machine with rotating upper beam (straight tool on one side, segmented tools on the other) with the newly installed Prolink control system. Specification: Manufacturer: Göteneds Model: FUTURA 25 Year of manufacture: 2006 Working length: 2 600 mm Bending thickness: 2.5 mm Lhsdsrx N U Hopfx Ab Usn Rear support: automatic 2 000 mm Control system: newly installed ProLink Other features: steel wheels on the rear support, adjustable folding speed, curvature compensation system, quick tool lock, tool height 150 mm. Weight: 4 290 kg. Delivery: two months after order If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2018, CIDAN FORMA metal bending machine in good condition. It is a universal solution that meets the needs of both serial and single production. Fast, easy to operate and comfortable for the operator. Simple programming system - PROLINK, touch screen control provides convenient programming. Fast tool change time allows you to minimize the preparation time. The FORMA model is equipped with a combined upper beam - two different types of tools can always be used. Straight tool or segmented tools. Multifold version (when the upper clamping, lower and bending beams have segmented tools). Ledpswnfkdsfx Ab Uehn Backrest Forma backrests have a solid construction, driven by a servo motor, ball drive and linear rails to ensure maximum accuracy and repeatability. The machine is connected, you can see and test it live. Specification: Manufacturer: Cidan Model: Forma Year of manufacture: 2018 Working length: 3100 mm Max. bending thickness: Steel (max. sheet thickness): 3.0 mm Stainless steel (max. sheet thickness): 1.9 mm Aluminum (max. sheet thickness): 4.5 mm Upper beam opening height: 195 mm Motor power: 7.9 kW Weight: ~4.7 t Equipment and functions: Control system: Prolink with touch screen CNC controlled back rest: U-shaped 3–3000 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 125 mm Segmented bending beam tools: 30 mm Tools 2900 mm If you have any more questions, we will be happy to answer them.