Used Weber Cr 6 for sale (103)

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Kdjdpfx Ahevgnr Aovoi - Hydraulic pump.

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW Kdodoymfzropfx Ahvsi weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Kdodpfx Aheua E H Ssvsi - Suitable for single wall pipes up to 220mm

Condition: used, Year of construction: 2007, functionality: limited functionality, Used Weber sheet metal deburring machine with extraction system Manufacturer: Weber Model: BLC 1P 1100 Year of manufacture: 2007 1 x grinding unit + 1 x brushing unit Including extraction system with ductwork The height adjustment of the brushing unit occasionally malfunctions or resets itself. The height control (encoder) should be inspected. The touchscreen sometimes responds poorly. Kdsdpfeyi H E Dex Ahvji For all further details, please contact us by phone.

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W Ksdpfx Asyimqwohvedi 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter Kdsdpob A Sxgjfx Ahvji -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Ksdpjgmdr Uefx Ahvsdi

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Kjdpfxjfp A I Eo Ahvsdi Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Kodpfx Ahoyciydevedi Internal diameter: 690 mm Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Kjdpfx Ahoyhcl Djvedi Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Kdedpfxsyhcc Ao Ahvoi Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), Kdsdpfoyhcabex Ahvoi consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Kedpevryhyofx Ahvodi Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: ready for operation (used), total length: 2,050 mm, total width: 850 mm, total height: 1,350 mm, overall weight: 300 kg, WEBER desulphurizer. Type - ASB 1000 Belt dimensions - Length - 205cm. Width - 40cm. Infeed - 90cm. Exit - 113cm. Roller width - 48cm. Total dimensions - Length - 205cm. Width - 85cm. Height - 135cm. Weight - 300kg. Kjdpfx Aherq Dmcjvjdi TJ.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x Kdsdjx U A Iaopfx Ahvei +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm coil hight: max. 800 mm Kdsdpsdx Ryyjfx Ahvsi

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm Kjdsid Sgmopfx Ahvjdi outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit Ksdpfx Asw Dbkrohvedi -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Six machines available in total. Further details on request. Payment by cash or advance bank transfer. Kjdpfx Ahsya H Hcevjdi Sale to commercial buyers only, no warranty or guarantee.

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Kedpfx Ajx Apckehvsdi

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder Kdjdpeq Tr Tbefx Ahvei - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: used, Year of construction: 2007, Technical details: x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm b-axis: 360 000 x 0,001 ° milling head speed: 1 - 10000 U/min spindle taper: ISO: 50 Kjdpfx Ahexp Hgtsvodi rapid traverse: 60 m/min pallet size:: 630 x 630 total power requirement: 37 kW weight of the machine ca.: 25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL *

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens Kdodpfxjt H Rrze Ahvji We will be happy to send you further information on request.

Year of construction: 1989, condition: good (used), Power trowel, concrete trowel, screed trowel Kdjdpfx Ahsb A Hdfjvsi -without a flat iron -Weight: 60 kg

Year of construction: 1999, condition: good (used), Brand: Hans Weber GmbH Model: ZE 20 Screw type: Single screw Year of manufacture: 1999 Screw diameter: 20 mm L/D ratio: 20 L/D Motor power: 3 kW Control voltage: 200 V Kdsdsx Ek Tljpfx Ahvsi Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: approx. 300 kg Other: – Including swivel mounting arm – Including extra connection box