Used Weeke Venture 6 for sale (74)

Condition: good (used), Year of construction: 2011, I sell the 3-axis CNC working centre HOMAG WEEKE VENTURE 106M with beam table Year 2011. Configuration: 3-axis main spindle 9 KW Ncsdpfx Ahsvld Epovop Tool magazine 9 positions HSK63 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3050 x 1260mm. 2 working fields, 2 clamping areas Automatic central system of lubrication. Software WoodWop 6.0 with full instructions. Pump BECKER 110m3/hr. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Specification: Working length X: 3130mm Working width Y: 1250mm (1550mm from rear stops) Working height: 100mm Vertical 12 Spindle Drill Block 4 Horizontal drill in X Direction 2 Horizontal Drills in Y Direction Nodpfx Ahsywu Uwsvecp Grooving Saw swivelling 90 degrees 9Kw Spindle with C-axis for aggregates 8 Position rotating tool changer at the rear 8 Position linear fixed tool changer Tool Pick Up Station Laser Pin Vacuum Pod Positioning Powertouch control system Energy Saving Mode CE Mark

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, X working area: approx. 3250 mm Y working area: approx. 1220 mm Z working area: approx. 100 mm C-axis electrospindle Vertical drilling heads: 12 Horizontal drilling heads X: 4 Ncodpfxeywit Uj Ahvop Horizontal drilling heads Y: 2 Grooving saw blade 8-position tool changer 6-bar working table Vacuum pump Software: PowerControl WoodWoop Safety mats Safety fences The machine is sold with aggregates and without tools 4 spindles, saw aggregate, tiltable angle aggregate, lock box aggregate 12 large clamping systems 6 small clamping systems 4 clamping plates 4 Multispanner clamping systems 12 small suction cups Including 4 aggregates, suction cups, and 4 Multispanner clamps for narrow components Available: December 2026

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 4300 kg Movement X-Axis Movement 3860 mm Z-Axis Movement 185 mm Y-Axis Movement 1793 mm Main Drive Number of axis 3 Ncsdpfxox D Inzs Ahvsp Spindle Speed 24000 RPM Spindle motor power 17 kW This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Ncsdpjwuz N Nefx Ahvjp Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Ncodpex Ey H Iefx Ahvsp

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, number of axes: 3, total height: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits Ncedpfx Ahjyap S Iovep • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel Ncsdelikvhspfx Ahvop X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, Year of construction: 2016, working length 20-1250 mm working width 50-800 mm working thickness 10-60 mm cnc controlled in X / Y / Z 3 spindle drilling head Nsdpfx Ahjym Rqrsvjcp machine without the gluing pump

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Ncsdpfxjwuz S Dj Ahvsp Lateral horizontal groups: yes

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-15-0310, functionality: fully functional, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, number of slots in tool magazine: 9, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Ncedsxdw Tgopfx Ahvsp Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Nodewuz Dgjpfx Ahvscp

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Nodpfx Aot Hmt Ishvscp

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Ncodpfowuclxox Ahvop Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Nsdsx A Td Ejpfx Ahvjcp Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Nedpfxsx A Th Rs Ahvscp Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Y axis working area: 850 mm Number of controlled axes: 3 axes Ncodpfxjywafuj Ahvjp Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Ncodpowuckhefx Ahvjp Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Ncjdpfx Ajw Idb Hshvop Total number of drilling spindles: 19

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) Ncedjyv Ev Aopfx Ahvjp No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: used, Year of construction: 2016, machine/vehicle number: 0-250-21-2132, functionality: fully functional, operating hours: 17,096 h, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 410 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, workpiece height (max.): 410 mm, number of axes: 4, number of slots in tool magazine: 28, controller manufacturer: POWERCONTROL, overall weight: 7,000 kg, table length: 4,300 mm, table width: 2,250 mm, year of last overhaul: 2025, Equipment: CE marking, We are offering this used Weeke BHP 210 profiline nesting machining center, year of manufacture 2016. Used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year built: 2016 4-axis nesting machine C-axis extension for Flex5 aggregate MATRIX work table: 4300 x 2250 mm Vacuum pump: 3 units, each 300m³/h with frame Working area X: 4300 mm Working area Y: 2250 mm Working area Z: 185-410 mm Customizable vacuum zones: 1–25 fields V21 Highspeed 7500, 21 vertical drilling spindles 4 horizontal drills Milling spindle: 9 kW, up to 24,000 rpm, liquid-cooled With C-axis 360° interpolation Ncjdpfx Ahoywuaasvep Air blower at milling tool, integrated in suction hood Tool changer: 2 x 14-fold, rear-mounted Part ejection unit, belt conveyor 4050 x 2250 mm PowerControl system with TFT 21.5" Full HD multitouch display WoodWop 6.0 including MDE (machine data acquisition) and production list software Climate control unit for electrical cabinet Tool length measurement PC: Windows XP, PowerControl PC85 Collection location: Westerstede If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Ncedpfx Ahoyu S I Iovep WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: vertical CNC machining center Weeke Optimat BHX 500, year 2007, designed for drilling, milling, and slotting panel materials in the furniture industry. The machine allows fast and precise processing of components and is suitable for both series and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year: 2007 Machine type: 3-axis continuous CNC machining center Ncsdpfx Ahsywgb Novjp CNC control: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 top, 48 bottom) 36 vertical tools 12 horizontal tools Slotting saw Milling cutter (top and bottom) 125 mm saw, rotatable 90° Automatic clamping workpiece transport Applications: Drilling for dowels and fittings Milling and slotting Processing of particleboard, MDF, HDF, plywood, and solid wood Advantages: Ability to process two pieces simultaneously, significantly increasing productivity Quick setup and workpiece change High precision in drilling and milling Ideal for manufacturing case furniture, kitchens, cabinets, and interior fittings Condition: Machine is regularly maintained and operational Test run possible upon inspection Delivery: June 2026

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-05-3373, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: documentation/manual, We are offering this impeccable and ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2001. Manufacturer: Weeke Model: Optimat BHC 550 Year: 2001 Condition: ready for operation Category: machining center The machine is connected and in demonstration-ready condition. We recorded a demonstration mode video a few days ago that shows the machine operating error-free. We will be happy to send you this video via WhatsApp upon request. It is equipped with woodWOP 8.0 Version 6.0.71 / 8.0.231.0 (32-bit). Scope of delivery additionally includes: - All required guards and safety fencing - Control cabinet with accessories - BECKER KVT 3.100 vacuum pump Ncjdpfeyvkygox Ahvop - Termo-Tec laser cooling unit Thermochiller 1kW, Type P601-015 - All documentation, operating manual, circuit diagrams If you have any questions or require further information, please feel free to send us a message or give us a call. All information provided without guarantee.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Complete Production Nsdex D Dq Sspfx Ahvocp