Used Weber Ta 2200 for sale (102)

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Iodpfx Aeyimqwjbnjtk Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2022, condition: used, Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling price: €9,990.00 net / €11,888.10 gross Technical data Engine: Hatz Diesel Engine power max.: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors in the CR series impress with their high compaction performance and maximum efficiency. For compaction work ranging from classic road and civil engineering to paving, they are therefore the first choice. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching of forward and reverse operation via fingertip control - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free working with the height-adjustable handlebar - Protection of machine and engine by protective frame and complete engine fairing - Reduced maintenance effort due to the self-adjusting centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets in the engine console - Increased operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving, compaction of paving and compaction of sand, gravel or stone We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at . If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. Itodpjznrtiefx Abnsk We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal No: 071417 = More information = New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Iodpfx Abezni Rxsnjtk You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: blue, operation weight: 62 kg, Year of construction: 2026, Equipment: UVV, Weber SRV 590-II Rammer – NEW | 700 blows/min | 62 kg operating weight | 280 mm shoe width | Honda GXR 120 petrol engine with 2.7 kW Item number: WEB170160 Technical Data: Manufacturer: Weber MT Model: SRV 590-II Condition: NEW Operating weight: 62 kg Blows per minute: 700 min⁻¹ Ijdpfezh Dy Iox Abnetk Shoe width: 200 mm or 280 mm Engine: Honda GXR 120 petrol engine Engine output: max. 2.7 kW Fuel: Petrol Starting system: Recoil start Features & Equipment: - Proven rammer for professional compaction applications - Reliable Honda GXR 120 engine – powerful & durable - 200 mm or 280 mm shoe width – ideal for trenches & confined job sites - High impact rate for efficient compaction - Compact & robust design – optimal for construction site use - Quality by Weber MT – immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal operations & construction companies ✓ Fiber optic & network installation Location: Warehouse D 46514 Schermbeck (NRW) – Inspection & collection possible Delivery across Germany & internationally on request Pricing ex works Maassenstraße 91, D 46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further models available! SRV 620, SRV 660, etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Weber Rammer | SRV 590-II NEW | Petrol Rammer | Honda GXR 120 | 280 mm shoe width | Weber MT Compaction Technology Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! On request, we are happy to offer you a virtual machine inspection via video call.

Condition: excellent (used), WEBSITE HYDRAULIC RESCUE SET WEBER HYDRAULIK DIN 14800 H2 For sale: Professional hydraulic rescue set by WEBER HYDRAULIK, used in technical rescue operations by fire brigades, emergency services, and industry. The set includes: - Manual hydraulic pump - 2 hydraulic cylinders / spreaders - Hydraulic hoses - End fittings, adapters, extensions - Spreading and supporting elements - Original transport case - Documentation as shown in the photos Ijdpfx Aoyxtcvjbnstk Technical data: Manufacturer: WEBER HYDRAULIK Set type: Hebesatz DIN 14800 H2 Working pressure: 630 bar Lifting force: 80 kN or 150 kN Condition: Used Condition: - Fully operational - Complete set as pictured - Normal signs of use, paint abrasions - Stored in transport case Additional information: - Professional equipment - Ideal for workshops, technical service providers, emergency services, or collectors - Shipping or personal pickup available

Condition: used, mileage: 1,001 km, power: 2 kW (2.72 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 62 kg, first registration: 01/2018, Year of construction: 2018, driver cabin: other, Vehicle location: Bovenden. Honda GX R120 petrol engine! Accessory specifications provided without guarantee; subject to changes, prior sale, and errors reserved! Iodpexy Swrjfx Abnstk

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden is at your service (by phone). WEBER CR 8 Hatz Diesel Vibratory Plate / New machine / In stock & immediately available. Sales price: €10,490.00 net / €12,483.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their high compaction performance and maximum efficiency. They are the first choice for compaction tasks ranging from classic road and civil engineering to paving work. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 8 – The new top class: powerful, robust, reliable: - Infinitely variable forward and reverse travel - Hydraulic switching for throttle and hydraulic controls integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable handlebar - Protection of machine and engine by robust protection frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all service components are easily accessible - Secure and fast loading thanks to large, folding lifting eye - Safe lashing for transport with additional lashing eyes on the engine console - Enhanced operating comfort with electric start and hour counter - Areas of application: road and civil engineering, trench work, sub-base for paving, and compaction of sand, gravel, or crushed stone Iodoymv Szepfx Abnstk Technical Data Engine: Hatz Diesel Max. engine power: 10.3 kW (14.1 HP) Weight: 601 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm On request, we can also provide a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Weber MT equipment for you! Errors and prior sale excepted. = More information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Itsdsx Twcpspfx Abnsk

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg Ijdozvm Hyopfx Abnotk pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Iodpfszvcrlex Abnotk Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Width: approx. 380 mm Weight: 250 kg Drive power transmission: toothed belts Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Iedpfx Abezu Ht Rsnjtk

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units Itodpfx Abszuzctjnek - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour Iedpfx Abjzu Nl Aenetk

Condition: ready for operation (used), Year of construction: 2006, A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible. Itjdpfx Abszli Ufjnjk

Condition: ready for operation (used), Year of construction: 2013, A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible. Isdpfozli T Isx Abnstk

Condition: ready for operation (used), Year of construction: 2007, A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible. Isdpozli T Ujfx Abnotk

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Isdpszli Ulefx Abnjtk

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Iedpfx Ajyx H E Debnjtk

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Serial number: DS 85 777 Ijdpszuk Hbofx Abnjtk Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Condition: as good as new (ex-display), All parts from picture come with machine. Iedsgrafkspfx Abnetk

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Isdpfx Abozrt Enenstk Screw length: 17 x D Condition: used

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made Iedpfjy T Ip Tex Abnjtk – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Itsdpfxjzp Rgqs Abnsk

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, spindle speed (max.): 5,500 rpm, number of slots in tool magazine: 240, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Iodpfezl S Uhjx Abnetk Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Number of revolvers/magazines: 1 • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Rated voltage 3x 400 V • Frequency 50 1/s • Full load current 150 A • Rated current main drive 85 A • Connected load 80 kW 100 kVA • Operating voltage 400 V • Control voltage 24 DC • Frequency 50 Hz • Power 2.9 kW • Current 11.0 A • Refrigerant R134a • Filling quantity 3.0 kg Additional equipment • OPTIONAL: Tooling package (approx.): • Group 1: 700–750 tools (Ø up to 124.9 mm) • Group 2: 100–150 tools (Ø 125–224.9 mm) • Group 3: 50 tools (Ø 225–350 mm)Geometry readjusted (done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 50,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment Ijdpfx Aszl S T Debnstk • OPTIONAL: Tooling package • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm)Recent replacement of the X-spindle and the rotary seal on the IKZ (internal cooling through spindle)Geometry readjusted(done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50