Used Weber Srx 65 R 3 for sale (102)

Condition: new, Year of construction: 2023, Sales price: 1,990¤ net / 2,368.10¤ gross Shipping possible. The SRV 590 vibratory rammer - the strong lightweight Its low weight (62 kg) makes it easier to transport and work on the construction site. At the same time, you can rely on the robust construction of the SRV 590. Features: - Balanced running behavior and low hand-arm vibrations enable fatigue-free work. - Durable and powerful rammer system. Hfodpfx Afoiadxcoisn - Four-stroke GXR 120 petrol engine from Honda with low pollutant emissions. - Oil sensor checks the oil pressure when starting and prevents the engine from starting if there is a lack of oil. - Effective, multi-stage air filter system with cyclone pre-separator protects the engine from contamination. - Line and/or tank filters clean the fuel. - Throttle lever with locking steps for full throttle, reduced speed, idling and engine stop/fuel shut-off. - Maintenance-free tamping foot. - Easy transport with handles and rollers. - Operating hour meter as standard Technical data Operating weight: 62 kg Tamping foot width: 28 cm Impact rate: 700 rpm Engine: Honda GXR 120 (4-stroke petrol) Engine power, max.: 2.6 kW (3.6 HP) We are an official Weber sales partner with over 80 Weber-MT vibrating plates in stock. We are also a Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and one of the largest commercial vehicle dealers in Germany with 800 used vehicles. We supply the complete Weber MT range for you! Errors and prior sale reserved.

Condition: new, Diamond Weber WM 306791 A/R0 3 diamond tool , serial no. according to photo ,unused in original box, 100% functional, scope of delivery according to photos Hjdpfxei D Upkj Afiefn

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Hjdpfot Rcn Nsx Afisfn WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: new, Year of construction: 2023, WEBER CR 3-II Hd vibrating plate / new device / in stock and available immediately. Sales price: 3,890¤ net / 4,629.10¤ gross 3 year guarantee Shipping possible. The reversible soil compactors in the CR series shine with strong compaction performance and maximum efficiency. They are therefore the first choice for compaction work from classic road and civil engineering to paving. Balanced running properties, the high level of smoothness and low hand-arm vibrations ensure a high level of operating comfort. CR 3 - The all-rounder: - Stepless forward and reverse movement. Hydraulic switching - Low hand-arm vibrations - Fatigue-free working with the height-adjustable hand guide bar - Protection of machine and engine through engine protection frame and engine cover - Less maintenance effort thanks to the self-tightening centrifugal clutch - Simple service, because all maintenance elements are easy to reach - Safe and quick loading thanks to large, foldable crane eye - Areas of application: earthworks, gardening and landscaping, vibrating composite paving stones and compacting sand, gravel or crushed stone Technical data Engine: Honda petrol Max. engine power: 6.0 (8.2) kW/HP Weight: 203 kg Centrifugal force: 35 kN Frequency: 80 Hz Working width: 50 cm We are an official Weber sales partner with over 80 Weber-MT vibrating plates in stock. We are also a Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Subject to errors and prior sale. Hfodpfjiadw Usx Afisn

Condition: new, Year of construction: 2023, WEBER CR 3 Hatz diesel vibratory plate / new / in stock and immediately available. Selling price: 4.790¤ net / 5.700,10¤ gross 3 year warranty Shipping possible. The reversible soil compactors in the CR series impress with their powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from classic road construction and civil engineering to paving. Balanced running characteristics, smooth operation and low hand-arm vibrations ensure a high level of operator comfort. Advantages: - Stepless forward and reverse travel. Hydraulic changeover - Low hand-arm vibrations - Fatigue-free working with the height-adjustable hand guide bar - Machine and motor protected by motor protection frame and motor cover - Less maintenance required thanks to the self-clamping centrifugal clutch - Simple servicing, as all maintenance elements are easy to reach - Safe and fast loading thanks to large, foldable crane eye - Areas of application: Earthworks, gardening and landscaping, vibration of interlocking paving stones and compacting sand, gravel or crushed stone Technical data Engine: Hatz diesel Engine power max.: 3.5 (4.8) kW/hp Weight: 206 kg Centrifugal force: 35 kN Frequency: 80 Hz Working width: 50 cm We are an official Weber sales partner with over 80 Weber-MT vibratory plates in stock. We are also a Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT program for you! Hfedjiadw Rjpfx Afion Subject to errors and prior sale.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece Hfsdpfx Asw Dbkrofien

Condition: excellent (used), Year of construction: 2016, operating hours: 36,000 h, functionality: fully functional, Very well-maintained machining center from Burkhard und Weber, year of manufacture 2013. Location: Baden-Württemberg Hodpfx Afjxnz Rweijfn Basic data as attached; specific documents (order confirmation) only upon request. Model: MCR 1100 Working area (X/Y/Z): 1600/1250/1250 mm Optional working area (X/Y/Z): 1600/1500/1600 mm Workpiece clearance diameter x height: 1600 x 1750 mm Standard pallet size: 800 x 1000 mm Maximum pallet load (optional): 4000 kg Rapid traverse (standard axes): 30/30/30 m/min Spindle power (100% duty cycle): 52 kW Maximum torque (100% duty cycle): 1720 Nm Speed range: 20 to 5500 rpm (optional 10,000 rpm) Number of tool pockets: 128 to 800 Max. tool weight: 60–75 kg

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Hjdefp A I Ejpfx Afisfn Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: excellent (used), From 2022 with complete documentation and with Zebra ZE500 printer. Good as new. Hedpevt An Ssfx Afijfn

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Hfsdpfxjxlcfks Afion Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Hfodpfsxf Up Ujx Afien Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Hedpjxghz Hsfx Afijfn

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Hjdpoku Aw Njfx Afijfn Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 1986, machine/vehicle number: 8240, Bandanzahl : 1 max. Arbeitsbreite : 1100 mm max. Arbeitshöhe : 150 mm 1. Band : Kombiaggregat Ausführung 1. Walze : Stahlkontaktwalze Schleifschuh 1. Aggregat : starr, höhenverstellbar Schleifbandlänge 1. Aggregat : 2500 mm Schleifbandbreite 1. Aggregat : 1150 mm Antrieb Aggregat 1 : 15 kW Steuerung : Handbedienpult Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Tischanzeige : digital Hfsdpfowaukdex Afien Betriebsdruck : 7 bar Arbeitshöhe bzw. Aufgabetischhöhe : 850 mm Beschreibung : neuer Teppich Gewicht ca. : 1700 kg

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min :Electric sheet thickness adjustment :Electric tool positioning Hfjdsw Ubt Hopfx Afijn Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Hfjdpfx Ajvgnr Aofion - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Year of construction: 1993, condition: used, Cutting depth 220 mm Hodpfx Afsw Syibeiofn weight of the machine ca. 375 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm Hodpfsqpft Iox Afisfn - Working hours: 102.364

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Hjdpew U A Dmofx Afiofn Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Hodpfjw Up Rmjx Afiofn Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Hjdpsdzp S Rsfx Afisfn Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Hedpfx Aevgnttjfiefn

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Hsdogmdr Ujpfx Afiofn

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Hedpjvgnhwjfx Afisfn - Hydraulic pump.

Year of construction: 1989, condition: ready for operation (used), A conical twin-screw extruder Weber for PVC profile extrusion including cooling water basin, pull-out machine and a saw is available. Extrusion capacity: approx. 90kg/h, drive: 30kW, injection height: 100mm, temperature range: 0°C-300°C, motor power: approx. 20kW, controller: Philips Pastomatic, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Hfodowu E Agjpfx Afisn