Used Weber Srx 65 R for sale (104)

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available Pgodpow Dbkrsfx Agwsu -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, Burkhardt + Weber MCR 900 HVC 5-Axis Machining Center 5-axis swivel head (NC-controlled, 2 gears, up to 42 kW / 2,000 Nm / 8,000 rpm) Year of manufacture: 2011 Excellent condition Control system: Siemens 840D Solution Line Travel paths (X/Y/Z): 1,600 mm / 1,250 mm / 1,600 mm B-axis: 360,000 × 0.001° Pallet size: 800 × 1,000 mm (A2) Pallet load: 3,000 kg Spindle taper: SK50, face contact 125 Max. spindle speed: 8,000 rpm Tool magazine: 330 tools Max. tool length: 600 mm Rapid traverse rates (X/Y/Z): 30 m/min Feed force (X/Y/Z): 20 kN Rotary table torque: 25,000 Nm Coolant tank: 3,300 l Coolant pump 1: 530 l/min at 4 bar Coolant pump 2 (high pressure): 30 l/min at 50 bar Including options: tool holder cleaning; special enclosure. Delivery time: Machine will be dismantled in week 43, delivery week 44, 2025 Payment terms: 100% prepayment before collection Pgodpfx Aoxr Rdujgwsu Inspection: possible at any time by appointment Availability: Subject to prior sale Pictures and machine layout are attached. Nearest airports: Düsseldorf / Cologne / Dortmund. MACHINE PLAN (LAYOUT) ATTACHED HERE AS PDF. SPINDLE TECHNOLOGY EXPLANATION ATTACHED HERE AS PDF. About the tool magazine: Maximum capacity: 330 tools. 5 high-dynamic NC axes. Traverse speeds up to 200 m/min. Replaceable tool weight up to 60 kg, tilting moment up to 150 Nm. Tool lengths up to 1,200 mm. Boring bar / drill rod diameter up to 900 mm. Automatic detection of tool tilting moment and tool weight. Application-oriented pre-positioning and comprehensive tool management for maximum operator convenience. Each magazine is fully configurable according to customer specifications at the time of order and can be easily retrofitted or expanded even years later if required. Loading and unloading at a load station with 2 × 8 positions, parallel to machining. Intelligent tool management and optional 22" smart operator panel. Tool data transfer via chip, barcode, or online.

Year of construction: 1993, condition: used, Cutting depth 220 mm weight of the machine ca. 375 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Pgsdpfx Aew Syibjgwju Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 840C Main Drive Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Pjdpfx Agjxqta Nowsgu Tools Max tool length 750 mm This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole cylinder NW 600; small sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Support type: feet Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Double-jacket volume: 105.0 liters Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 9,000 mm Previous application: rapeseed oil TANK Pgedpoxqb Rvefx Agweu Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in cylinder, in top head, in top head (DN 600) Outlet: flange DN80 Note: dents in the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Heating/cooling system material: V2A 1.4301 (AISI 304) Foot material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 7 mm

Condition: used, Year of construction: 2007, Technical details: Pgsdexp Hgtspfx Agwsu x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm b-axis: 360 000 x 0,001 ° milling head speed: 1 - 10000 U/min rapid traverse: 60 m/min pallet size:: 630 x 630 total power requirement: 37 kW

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Pgsdoif Rvajpfx Agwju

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Pgjdpfx Ajxpu Tbsgwsu

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Pjdjltrg Sopfx Agwogu Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, Pgsdpfxofp A I Ee Agwju core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Notes: Support ring and vessel flange made of steel; handhole cover plated Inner diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: yes Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Support type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Pgsdpfsxqba Dex Agwsu Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: Chemicals VESSEL Max. vessel operating temperature / °C: 300 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil FEATURES Manhole / dome: handhole Outlet: flange DN50 AGITATOR Agitator placement: centered in the top head Agitator configuration: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top wall thickness: 15.8 mm

Condition: excellent (used), From 2022 with complete documentation and with Zebra ZE500 printer. Good as new. Pgsdpfx Agovt An Sjwou

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Pgjdpfx Aoxf Up Uogwou Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Psdsxlcfkjpfx Agwsgu Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Pgodpfsxghz Hjx Agwou

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Podpfxjku Aw No Agwsgu Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Pgsdpfxsxqa Nwj Agwou Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 8240, Bandanzahl : 1 max. Arbeitsbreite : 1100 mm max. Arbeitshöhe : 150 mm 1. Band : Kombiaggregat Ausführung 1. Walze : Stahlkontaktwalze Schleifschuh 1. Aggregat : starr, höhenverstellbar Schleifbandlänge 1. Aggregat : 2500 mm Pjdpfxjwaukde Agwjgu Schleifbandbreite 1. Aggregat : 1150 mm Antrieb Aggregat 1 : 15 kW Steuerung : Handbedienpult Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Tischanzeige : digital Betriebsdruck : 7 bar Arbeitshöhe bzw. Aufgabetischhöhe : 850 mm Beschreibung : neuer Teppich Gewicht ca. : 1700 kg

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Podpfx Aow Ubt Hjgwjgu Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min :Electric sheet thickness adjustment :Electric tool positioning Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Pgsdpfx Agovgnr Aowou - Hydraulic pump.

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. Podoqpft Iepfx Agwjgu - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Pgedow U A Dmopfx Agwsu Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Pgodpfx Agsw Up Rmjwju Condition: very good, like new

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Pgjdpfx Asvgnttsgwju - Hydraulic pump.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Pgedjvgnhwspfx Agwju - Hydraulic pump.