Used Vertical Slotting Machine for sale (66,170)

Condition: excellent (used), Year of construction: 2017, operating hours: 2,609 h, functionality: fully functional, machine/vehicle number: JPN112245, travel distance X-axis: 200 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 305 mm, spindle speed (max.): 10,000 rpm, For sale: Brother machining center, model M140x2. Year of manufacture: 2017, purchased new in 2018. This is a 5-axis milling-turning center, where the workpiece rotates at 2000 rpm and can be turned. The machine is virtually as new, as we never produced the products it was purchased for. We only made prototypes and samples. Itjdpsyahkiofx Ah Neb All equipment is included, purchased specifically for this machine, valued at almost €15,000.

Condition: used, Year of construction: 1996, operating hours: 8,900 h, functionality: fully functional, DMG vertical machining center Model DMU 50 V Year : 1996 5 axis Length movement : 500 mm. Iodpeyahh Iofx Ah Notb Cross movement : 380 mm. Vertical movement : 380 mm. Spindle : BT 40 Spindle speed : 8000 RPM. Tools in magazine : 24 pieces Control : Deckel Maho MillPlus Spindle hours : 8900 Interface RS-232 C Short arbors

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23165, Used CNC vertical hard turning machine Manufacturer: FELSOMAT Model: FTC 180 Year of manufacture: 2011 Felsomat automation for 23165 Itjdpfxjx Tbcaj Ah Nsb

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Isdpfex A Td Eex Ah Njtb Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: excellent (used), Year of construction: 2017, Excellent Condition Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Ijdsxmhbajpfx Ah Nstb Travel X/Y/Z - 400/650/485mm Distance from spindle nose to table top - 0-485mm A axis travel (rotate along with X axis) +30 degree C Axis travel (rotate along with Z axis) 360 degree Spindle Spindle speed - Direct drive 12,000rpm Spindle taper - BT40 Spindle motor (cont./30min) - 11/15kW Spindle max. torque (cont./30min) - 70/95Nm Feedrate Linear guideway on X/Y/Z axis - Ball way 35/45/45 mm Rapid Traverse rate on X/Y/Z axis - 36,000 / 24,000 / 10,000mm/min Rapid traverse rate on A/C axis - 20/27rpm Cutting feedrate - 10,000mm/min Tool Magazine Tool Magazine - 24 pocket Max tool diameter / adjacent pocket empty - 80mm Max tool length - 300mm Max tool weight - 8kg Space requirement & weight Machine length x width 2950 x 2350mm Machine height 3140mm Machine weight 7200kg CNC Control - Fanuc 0MP Miscellaneous Pneumatic requirement - 6kg/cm power requirement - 40KVA coolant tank capacity - 400ltr

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 18.1 kW Movement X-Axis Movement 650 mm Z-Axis Movement 375 mm Itjdpfxox S Skrs Ah Njb Y-Axis Movement 50 mm This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1996, Main Drive Number of axis 3 Spindle Speed 8000 RPM Tool taper BT 40 Tools Slots in storage 20 Iedpfx Asx S Si Ueh Notb This 3-axis Leadwell V-40 was manufactured in 1996. It features a BT40 spindle, a 20-tool automatic tool changer, and a maximum spindle speed of 8,000 rpm. External coolant is provided at 2 bar. If you are looking to get high-quality milling capabilities, consider the Leadwell V-40 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Application Types Milling Itsdpfxjx S Skxo Ah Nsb

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,662 h, Control Unit Brand HEIDENHAIN Model ITNC 530 Main Drive Number of axis 5 Itodpfxsx D Drio Ah Nsb Spindle Speed 18000 RPM Movement X-Axis Movement 1500 mm Z-Axis Movement 800 mm Y-Axis Movement 1500 mm This 5-axis LGB KX45S FIVE 2 was manufactured in 2012, featuring a moving table of 1480 x 1440 mm and a high-speed spindle at 18,000 rpm. It includes a HEIDENHAIN ITNC 530 control, HSK 63A tool holder, and a 24-position tool changer. Ideal for precise, complex machining tasks. If you are looking to get high-quality milling capabilities consider the LGB KX45S FIVE 2 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2002, operating hours: 24,396 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Our 4-axis machining center DMG (DMC 64 V linear) is currently for sale. • Control system: Heidenhain iTNC 530 • The machine is in good condition, fully operational, and can be inspected under power on site. • The machine is equipped with a full-fledged 4th NC axis (rotary table by Nikken). • The machine has an additional M-function: "Compressed air cooling through the spindle." • Chip conveyor included. • We have a factory-overhauled milling spindle in stock as a spare part, which can be purchased for an additional charge if needed. Itedeyacitepfx Ah Nob • The tools and clamping devices shown in the pictures are not included in the sale. • We are extremely satisfied with the machine’s precision and reliability. • The machine is available at short notice. • Dismantling and loading of the machine can be organized by us upon request for an additional fee.

Condition: good (used), Year of construction: 2016, operating hours: 22,500 h, functionality: fully functional, machine/vehicle number: 20160606, travel distance X-axis: 2,050 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: 530, workpiece weight (max.): 5,000 kg, table width: 1,000 mm, table length: 2,000 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, PosMill 2050: currently undergoing complete overhaul. New spindle, spindle motor, rotary union, fan. €35,000 net, supporting documents available. Travel ranges: 2050 x 1150 x 700/900 mm Table size: 2200 x 1000 mm Spindle: 12,000 rpm Heidenhain glass scales on all axes Heidenhain 530 Tool changer: 60 / HSK 63 Through-spindle coolant 20 bar with belt filter system Blum laser tool measurement 3D probe Renishaw Handwheel Active control cabinet cooling Air through spindle via M function Air at spindle with M function Iedpoyabrmefx Ah Netb 100 pcs HSK 63 tool holders Long clamping plates can be purchased at extra cost

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Iedex S Rxnjpfx Ah Njtb Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: repair required (used), Hyundai SPT-V30T machining centre with automatic tool changer. Powers on but does not start, servo error. Sold for repair or for parts. If you have further questions, we will be happy to assist. Itedpfxex S I Iae Ah Nsb

Condition: defective spare-parts repository (used), CNDN CK6140 machining center, non-functional, has been disassembled, a new part has been machined but we have not reassembled it. Sold as non-working – can be reassembled or used for spare parts. Itjdpfx Asx S I Dbjh Neb If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, CNC Fanuc Itodpfx Ahox U Urwj Njb 30-tool changer, BT40 spindle, max speed 15,000 rpm travels 1000x600x600 mm chip conveyor set of tools weight 7,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways Itodpfox U Tr Aex Ah Njb *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: used, Year of construction: 2014, travel distance X-axis: 1,350 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: FANUC, controller model: 0-iMD, workpiece weight (max.): 2,300 kg, table width: 1,500 mm, table length: 600 mm, spindle motor power: 27 W, VERTICAL MACHINING CENTER "AKIRA SEIKI" MOD. V 5.5 XP Complete with standard equipment and: - Chip conveyor - Remote electronic handwheel - Tool presetting device - Random tool magazine with 28 positions Itodpfxex U S N Te Ah Nob

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details x-travel 2000 mm Iodpfxox S Edro Ah Njtb y-travel 650 mm z-travel 650 mm Control Mazatrol 640 M weight of the machine ca. 12 t Additional information Mazatrol 640 M CNC Control Travels: X-axis 2000 mm Y-axis 650 mm Z-axis 650 mm Spindle speed 6000 rpm with two gear stages Tool holder SK 50 Spindle motor power 18.5 kW Table size: 2240 x 650 mm Machine weight 12000 kg Equipment: Dual pallet changer (2PC) 4-axis Kitagawa rotary table Tool changer with 60 tool positions Zero Clamp zero-point clamping system Mayfran chip conveyor Coolant system with 70 bar pressure Internal tool cooling ILT internal extraction system with air filter

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 1100 mm y-travel 600 mm Itsdpex S Eczjfx Ah Nob z-travel 510 mm total power requirement 30 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4400 x 2250 x 2920 mm Additional information Working area: X-axis travel: 1100 mm Y-axis travel: 600 mm Z-axis travel: 510 mm Rapid traverse: 32 m/min Worktable: 1300 x 600 mm T-slots: 6, size 18, 100 mm spacing Max. table load: 1000 kg Distance from column to spindle center: 600 mm Spindle: 60 - 12000 rpm Drive power: 10/17 kW Spindle taper: ISO 40 / DIN 69871A Magazine: 32 positions Max. tool weight 8 kg Max. tool length 300 mm Max. tool diameter 76/127 mm Tool change time 2.5 sec Space requirements: Length x Width x Height 4400 x 2250 x 2920 mm Weight 8500 kg Equipment and accessories: Heidehain iTNC 530 CNC control Internal coolant system (IKZ): 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. Itodpfsx S Ebkex Ah Nsb spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: used, machine/vehicle number: 008258, X axis working area: 3500 mm Y axis working area: 920 mm Main Electrospindle power: 7 KW Number of controlled axes: 3 axes Itsdpfex A Hfcjx Ah Njb Total number of drilling spindles: 15 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Ijdpfx Ahowuclxj Njtb Total number of drilling spindles: 11

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor Itedpeuxbciefx Ah Njb machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Röders RXP600DSH - HSK63F spindle max. 30,000 rpm - 24-position tool changer - Emulsion cooling with 40 bar internal coolant supply (IKZ) Itjdpfx Aex I A Imsh Nob - Extraction system - Laser tool measurement - 3D probe - Thermal package - Prepared for automation The machine is already at our facility in Soltau. We will upload pictures shortly.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,186 h, Control Unit Brand HEIDENHAIN Ijdpfx Aex Sz Dush Notb Main Drive Number of axis 5 Tool taper SK 40 This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine. Application Types Milling