Used Vertical Slotting Machine for sale (66,162)

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Bjdjzhi R Sepfx Adrjwp

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Bsdpfx Adezhi Nzsrewp

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Bwjdoyx Na Rspfx Adrsp

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Bwsdpfxsvtcqgo Adrsp

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Bwjdpfjywpblsx Adrsp

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Bedpfx Aewztmtedrjwp

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER Bjdpfex U E Szox Adrjwp NOTE: WITH No 1 4th AXIS TABLE

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available. Bwsdpfxew I Hzpo Adrop

Condition: excellent (used), Year of construction: 2006, HAAS VF-2SS vertical machining center, 4.axis Year: 2006 Traverses X Y Z: 762 x 508x 508 Table 914 x 457mm Bwjdpfx Adszfyarorsp Table load capacity: 1360 kgs Spindle speed 0 – 12000rpm Spindle taper SK40 Tool magazine capacity 24 positions, arm type Machine weight: 3600 kgs Accessories/options: - through spindle Coolant - swarf auger - Renishaw tool setter, TS27 - dividing/indexer, 4.axis unit

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control system with ShopMill Travel ranges X/Y/Z: 1020 x 635 x 610 mm Bjdpfx Adjzfx Uuerswp Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Measuring probe

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Bsdpjzfx Unefx Adrowp Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Bedpfx Aszfx Uhedrjwp Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Bwjdpezfx T Djfx Adrop Through-spindle cooling: 12 bar Chip conveyor

Condition: excellent (used), Year of construction: 1998, Control system: Fanuc OM Bwsdpfozfx Sysx Adrop Travel ranges X/Y/Z: 450 x 300 x 400 mm Table size: 600 x 300 mm Spindle speed: 8,000 rpm Tool magazine for 16 tools, SK 30.

Condition: good (used), functionality: fully functional, Bridgeport VMC 600 22 CNC machining center with Heidenhain TNC 410 / 426 control system -Travel X-axis: 600mm -Travel Y-axis: 410mm -Travel Z-axis: 520mm -Table load capacity: 500 kg -Spindle taper: SK 40 ISO/BT -Spindle power: 8.5 kW -Speed range: 40 to 6000 RPM -Tool changer: 22 positions -Number of controlled axes: 3 Bwsdpfx Aezhg Riodrep -Year of manufacture: 2000 -Length: 2800 mm -Width: 2050 mm -Height: 2300 mm -Weight: Approx. 2500 kg

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm Bwedpfxjzfqgvs Adrop control TNC 430 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t Bedpfx Aozfqgpjdrowp dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: used, overall weight: 1,500 kg, This deck-type Maho milling machine, model: type: MH 700 C, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths – milling and drilling machines – industrial sewing machines – grinding machines – workshop and office equipment. Bedpfxozfig Ie Adrjwp You can find this and many other items on our platform.

Condition: used, Year of construction: 1985, This Chiron CNC vertical machining center, type: FZ16L CN, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment. Bwedpozfid Hjfx Adrjp You can find this and many other items on our platform.

Condition: used, Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, controller manufacturer: Siemens, Equipment: rotational speed infinitely variable, Ref. 5.3-787 1 used vertical machining center Microcut Challenger MCV2418, year of manufacture 2008 CNC control Siemens 24-position tool changer chip tray Technical data: X-axis travel: 610 mm Bjdpfx Aowwi H Isdrswp Y-axis travel: 455 mm Z-axis travel: 520 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Table clamping area: 762x363 mm Tool magazine positions: 24 Weight approx.: 3200 kg Technical data, accessories, and machine description are non-binding.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3001033048, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: FANUC, controller model: 0i-MC, workpiece weight (max.): 1,000 kg, total height: 2,715 mm, total length: 3,260 mm, total width: 3,060 mm, table width: 660 mm, table length: 1,250 mm, table load: 1,000 kg, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 24, For sale: a DAHLIH DL-MCV1020BA CNC vertical machining center from 2008, equipped with a FANUC control system. Bwedpfx Aozhbq Rjdrop The machine is currently still operational in our production environment and has not been dismantled. This means that, if interested, it can be inspected while powered on and, upon agreement, tested in working order. This robust vertical machining center is suitable for a wide range of milling, drilling, and tapping operations and represents an attractive solution for companies looking for a reliable CNC machining center with a large machining capacity. The machine is sold in its current condition. Any tools, fixtures, or other accessories visible in the photos are only included if explicitly agreed upon. Inspection and functional testing are possible in Kuurne, Belgium, by appointment only.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fully equipped Biesse Brema EKO 2.2, including a return system and auxiliary units. Bwsdpfx Aezhbpajdrjp Quick delivery.

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 s Drive power max. 18.5 kW Speed range up to 10,500 1/min EQUIPMENT/ACCESSORIES  Automatic tool changer ATC 40  Long part machining/pendulum machining (center divider missing)  Splash guard with sliding doors, electrically secured, including machine light  Coolant system with high-pressure pump and paper band filter Container capacity 500 l, N-pump 200 l/min at 1.5 bar HD pump 50 l/min at 20 bar, including dual-stage filter  Internal coolant supply through the spindle (IKZ)  Chip conveyor with discharge height 1050 mm Bjdpfx Aoxwwc Usdrowp  Flushing gun  1 NC rotary table with chuck  1 hydraulic counter bearing  1 clamping bridge  Electronic handwheel  Installation elements  Documentation

Condition: good (used), Parts on table not come. Marked with red. Bsdewxdyxspfx Adrewp

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Bjdpewk Nm Isfx Adrewp 10.000 rpm