Used Water Slot Machine for sale (67,883)

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Nwsdpfxswqlmdo Aa Deg

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping Nedpox R Sv Sefx Aa Djwg -Fine adjustment via spindles and handwheels

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Dowel drilling device ----- Technical data ----- Worktable dimensions: 550 x 285 mm, Drilling width: 190 mm, Drilling depth: 120 mm, Speed: 2,840 rpm, Motor: 1.5 kW, Weight: 220 kg Njdpfxew Nv Nxe Aa Djwg

Condition: used, Year of construction: 1954, Technical details: max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW work table:: 650x250 mm ram adjustment: 100 Manuell mm no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm table adjustment: ca. 360 vertikal mm tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t Njdpfxev Ty R Do Aa Dewg dimension machine xH: 1,2 x 0,9 x 1,8 m

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 180 mm adjustment of stroke: 100 mm no. of ram strokes: 45 / 73 / 125 Hub/min distance table/ram: 400 mm work table:: 650 x 250 mm total power requirement: 2,0 kW Nedpfeu Ng Tnjx Aa Djwg voltage: 380 V dimension machine xH: 1,3 x 1,0 x 1,9 m VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted on the crank disk by means of a threaded spindle. Inclined position of the ram guide with ram 10° Rotation of the drive disk per min. = 400 rpm. The machine does not comply with the legal safety requirements of the UVV (UVV = accident prevention regulations) . Sold as is, without test. *

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. Nwodpfju Ng T Ujx Aa Deg adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. *

Year of construction: 2020, condition: as good as new (ex-display), The TS-200K mortising machine is a device manufactured in Taiwan by EASTAR MACHINE TOOLS CORP., a leading company in the industry. The machine is characterized by its perfect level of workmanship; the body is made of cast iron, and all guides are made of high-strength steel. The machine body is machined on CNC machines, ensuring the geometry of the machine and high precision in fitting. The machine guides are protected by bellows, and the device is also equipped with a central lubrication system, which minimizes the operator's maintenance requirements. This makes the TS-200K mortising machine an exceptionally durable device that guarantees trouble-free operation for many years. The device is primarily used in tool rooms and maintenance workshops. Nedpfx Aasy Uxf Us Dowg Due to its ease of operation, the TS-200K mortising machine is ideal for both single-piece and series production. The machine has a CE certificate, and the operating manual is available in Polish. Main features: • Hardened and precisely ground beam guides ensure precise movement and high wear resistance. • 8 mortising speeds, allowing adjustment for different types of tools and mortising operations. • Central lubrication system ensuring lubrication of key machine components. • Ability to tilt the mortising head in the range of +/- 30°. Technical parameters Unit TS-200K Maximum ram stroke [mm] 200 Number of strokes per minute (50Hz) [1/min] L: 22, 26, 31, 39 H: 44, 52, 61, 78 Vertical adjusting travel of the beam [mm] 220 Beam tilting angle [°] +/- 30° Distance between the base of the beam and the surface of the work table (A) [mm] 300 Distance between the tool axis and the surface of the column (B) [mm] 355 Diameter of the work table [mm] 400 Longitudinal travel of the work table (X) [mm] 250 Transverse travel of the work table (Y) [mm] 250 Main motor power [kW] 1.5 Device weight [kg] 750 Device dimensions [mm] 1260x810x1730

Condition: excellent (used), Long-hole drilling machine HT200 - with laser - swiveling - 2 levels - outriggers on the left and right - year of manufacture: 1994 Njdpfx Aajy Tub As Dewg - swivel range 65°-0-65° - 400 volts - pneumatic clamping and feed system

Condition: used, total width: 1,600 mm, total length: 2,500 mm, total height: 1,700 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Model: Horizontal - Power [kW]: 7.5 - Max. stroke [mm]: 700 - Max. reach [mm]: 450 - Table length [mm]: 700 - Table width [mm]: 450 - X-axis travel [mm]: 800 - Y-axis travel [mm]: 1200 - Z-axis travel [mm]: 300 - Transport dimensions: 2500mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Nodpfx Aaswnicwe Djwg

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Self-breaking main motor : 4 kW / 5.5 h Nodpfx Asvfctfsa Dewg Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Nwodpfswhuu Esx Aa Deg Weight: 300 kg

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive Nsdpfx Aoy Saw Hja Dowg - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Nwsdpevzramefx Aa Dsg Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction Nedsytx T Iopfx Aa Dowg - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Maximum milling height: 120 mm Maximum milling depth: 50 mm Maximum milling width: 260 mm Spindle diameter: 40 mm Motor power: 11 kW Nodpfx Aasy Sg Ufo Dewg Spindle speed: 5,400 rpm Feed rate: 0–3.5 m/min Weight: approx. 400 kg

Condition: good (used), Year of construction: 1995, 1 used hydraulic CNC keyway broaching machine Nwsdpfxey I R N So Aa Dog Manufacturer: Leistritz Model: Polymat 50/400 Year of manufacture: 1995 CNC keyway width: 50 mm Maximum stroke: 400 mm Bore diameter: 10–350 mm Pulling force: 15.9 kN Max. workpiece outside diameter: 500 mm Table size: 550 x 675 mm Cutting speed: 20 m/min Return speed: up to 40 m/min Machine weight: approx. 1,400 kg

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) Nedjtmp T Dspfx Aa Djwg - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020616/P, total width: 70 mm, total length: 90 mm, total height: 180 mm, pressure: 8 bar, operating pressure: 8 bar, input voltage: 230 V, Equipment: cabin, For sale: METAL FINISHING water blasting machine - Type – waterblast 800 Nwodpoy Rz Abjfx Aa Djg - Model – WBL 001 - Serial No. – 020616/P - Year: 2008 The machine has seen minimal use and has been regularly maintained. It is highly practical and extremely efficient. Its key advantage is that with high water pressure—containing abrasive media—it impacts the metal surface, achieving excellent results. The main benefit of the water blasting method is that the water and abrasives circulate continuously, returning to the tank. This means there is no dust, no abrasive particles released into the environment, and the work area remains clean at all times. The machine is connected to the mains supply and ready for immediate operation.

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps Nwsdpfxjw Naccj Aa Dog with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 Nwsdpew Ny S Rjfx Aa Dog 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, overall weight: 1,310 kg, input voltage: 400 V, total length: 1,500 mm, total width: 1,000 mm, total height: 2,250 mm, NR.01 EGITAL Slotting Machine Mod. S 315 TG Used "CE" Year: 2008 CE. Excellent condition. Tool stroke: 0–315 mm Strokes per minute: 17–60 Ram height adjustment: 235 mm Nodsy H Imxjpfx Aa Dewg Head rotation: ±45° Distance tool to column: 460 mm Distance head to table: 510 mm Rotary table diameter: 450 mm Fixed positions on rotary table: 24x15° Dimensions: 1000x1500x2250 mm Weight: 1310 kg Automatic tool release Chuck included

Condition: excellent (used), functionality: fully functional, Minimax Router 600 Overhead Spindle Moulder Spindle to arm distance: 600 mm Two-speed spindle drive motor: 2.2/1.5 kW Two spindle speeds: 9000/18000 RPM Spindle tilt adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Height-adjustable work table Pneumatic spindle control with foot pedal Nsdpfx Aoy Hhv Toa Dewg

Condition: used, Year of construction: 2020, The Centauro Alfa NC is your go-to solution for comprehensive machining operations on doors and frames. Whether you're working on hinge recessing, lock slots, keep plates or 3-point locks, the Alfa NC is a versatile addition to any door and frame manufacturing process. With a solid track record of delivering reliable performance and exceptional results, this highly popular machine is trusted by industry leaders. Achieve perfect hinge placements with precise recessing operations, create exact lock slots and keep plates for secure installations, and manufacture intricate handle holes, key slots and euro grooves with ease. The Centauro Alfa NC is designed with user convenience in mind, with simple programming via the TOP12 graphic touch screen controller, allowing quick setup and easy adjustments with pre-installed macros, making it accessible for both experienced operators and newcomers to CNC machinery. Experience the difference in quality that this exceptional machine brings to your production line and join the many satisfied customers who trust the Centauro Alfa NC for their door and frame machining needs. Specification: Axis capacity – X 2800mm – Y400 mm – Z 150mm X axis positioning speed 35 m/min Y and Z axis positioning speed 6m/min Maximum work table dimensions 3000mm x 618mm Main router head 3.3kw – rpm 0 to 18,000 – ER32 collet 2 x front pneumatic retractable positioning stops 2 x front support legs for doors Elco TOP 12 colour graphic touch screen controller CE side / rear safety guards with front light beam 2020 CE C/W Optional Extras: Nwsdpfx Aaoy H Iq Ro Deg Y axis stroke 400mm in lieu of 180mm ISO 30 Quick change manual pneumatic toolchanger

Year of construction: 2022, condition: ready for operation (used), A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible. Nodpfx Asy E S Eiea Dowg

Condition: excellent (used), Year of construction: 2018, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: 441, punching force: 28 t, total height: 2,020 mm, total width: 4,118 mm, total length: 4,042 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 8,400 kg, table width: 1,250 mm, table length: 2,000 mm, input current: 35 A, input frequency: 50 Hz, power of the servo motor: 3,700 W, feed rate X-axis: 120 m/min, feed rate Y-axis: 75 m/min, space requirement width: 4,100 mm, space requirement length: 4,600 mm, space requirement height: 2,200 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,250 mm, positioning speed: 60 m/min, construction width: 4,118 mm, tool length: 30 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.025 mm, Equipment: safety light barrier, The Boschert Compact 1250 rotation machine is fully operational. Please contact us to arrange a viewing. Nsdeww U T Hspfx Aa Dowg