Used Vertical Glass Washing Machine for sale (67,065)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine Maximum working height: 1300 mm Open top Working direction: from left to right 4 brushes (2 pairs) Rsdpfx Aey Uhmujizju Glass thickness: 4 - 12 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested As is Available immediately See video

Condition: excellent (used), Year of construction: 2013, vertical OPEN TOP glass wasching and drying machine Rsdpfx Asy S Rx Isizju working height : 1600 mm working direction : from right to left number of brushes : 4 Glass thikness : 3 - 50 mm total power : 17 Kw Machine has a set of new spare parts with a total of 6800 Eur Machine price on request .

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), - 2 pcs. of air knives, - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. The speed of movement of the conveyor is regulated by inverter Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately Rsdjy Na Rnopfx Aizsu

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Rjdpeq Ih Nysfx Aizeu Good working order Available immediately

Condition: good (used), - Type: 1300A - Serial number: 951313V - Open top - Dimension: - Total length: 4900 mm - Depth 1100 mm - Height 2300 mm - Washing machine 2100 mm - Inlet 1400 mm - Outlet 1400 mm - Washing height: 1500 mm Rjdpeq Ec D Tsfx Aizeu - 2 pairs of brushes - Connected loads: 380V, 50Hz, 11kW - Price on request

Condition: used, Year of construction: 2000, functionality: fully functional, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Freestanding glass washing machine consisting of: Infeed conveyor RTV-11/30 Infeed conveyor RTV-16/30 Infeed conveyor RTV-16/30 Washing machine VHW-30/V8 with thickness adjustment from 3-60mm glass thickness Outfeed conveyor RTVN-32/30 Inspection station RSV-27/33 Accumulation section RTVN-27/30 Accumulation section RTVN-22/30 Filter system SAF-1000 Rodpjy Uarpsfx Aizsu Maximum glass dimensions 5000x3000, minimum 350x180, glass thickness 3-60mm The machine is in good mechanical condition. The control system is functional, and spare parts can still be obtained for it.

Year of construction: 2017, condition: ready for operation (used), A vertical glass washing system is offered. Working range X/Y: unlimited/1600mm, glass thickness: 3mm-12mm, number of brushes: 4 units, feed speed: approx. 2.5m/min, washing system: separate washing and rinsing zones, material design: housing and water-carrying parts made of stainless steel, drying: integrated high-pressure blower with air filters, control: push-button control with individual component activation. Equipped with infeed and outfeed transport frames, lighting inspection station, water pump, filter unit. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 4500mm/2500mm/1100mm. Inspection possible by arrangement. Rodpfx Aioy Tn Naezeu

Year of construction: 2018, condition: ready for operation (used), A vertical glass drilling system is offered. Working range X/Y: unlimited/1300mm, drilling diameter: 3mm-100mm, glass thickness: 3mm-25mm, control: digital position display with manual drilling control. Equipped with rollers on both sides, water collection tray, pneumatic workpiece clamping, drill set. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 5000mm/2500mm/1200mm. Inspection possible by arrangement. Rsdpfx Aey Tn Hxoizju

Year of construction: 2006, condition: ready for operation (used), An automatic glass sandblasting cabin is offered. Working range X/Y: unlimited/1500mm, extraction air capacity: 1800m³/h, filter area: 17m², filter differential pressure: 1500Pa, operating principle: automatic surface blasting operation, filter system: cartridge filter unit with pneumatic cleaning, glass transport: vertical roller conveyor system, control: PLC control with digital control panel. Equipped with separate filter unit, blasting nozzle feed unit, water separator, enclosed cabin construction with rubber buffer inlet. Weight: approx. 1550kg, overall dimensions X/Y/Z: approx. 4500mm/2850mm/1650mm. Inspection possible by arrangement. Rjdpfx Aisy Tn I Aszeu

Condition: good (used), Year of construction: 2007, functionality: fully functional, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). Rjdpfx Ajy Sv Tkeizeu The brushes are still good for at least 1-2 years depending on production. The machine was used in small production only. Since it has some rusty spots we can offer it for a reasonable price. The machine is in working order and will be available from our stock in Oroshaza/ Hungary.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, actuation type: electric, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, Equipment: documentation/manual, EXPOGLASS® PRIAM is a modern vertical glass drilling machine equipped with electronic feed, automatic drill length measurement, and glass thickness measurement. The machine ensures high precision, smooth operation, and clean edges even with large hole diameters. Polish product – a solid, easy-to-use construction designed for intensive daily work in glass workshops. Technical data Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Rjdpfoh Ek H Sex Aizeu Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. Rjdpegq Dl Asfx Aizou ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested Rsdpfx Aey Nltnoizsu As is Available immediately

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition Rsdewl Dkqepfx Aizju • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions • Length 4500 mm, width 2000 mm, height 1250 mm • Inlet – 1000 mm, outlet – 1400 mm • Machine width – 2300 mm • Price upon request

Condition: excellent (used), Year of construction: 2016, Schiavo Easy 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Rjdpfx Aoyr N R Ujizou Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 160410, Open top washer for 3-12mm Washing height 1600mm Redpfxjwnw Afo Aizsu

Year of construction: 2012, condition: excellent (used), functionality: fully functional, horizontal glass wasching machine working width : 1300 mm glass thikness : 3 - 35 mm Rjdpfsyu N Urox Aizeu including motorized working height adjustment till 500 mm for maintenance min. glass size : 250 x 150 mm number of brushes : 4 number of air knives : 4 speed : 2 - 7 m /min machine sizes : L x H x H ca. 4742 x 2570 x 1320 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Horizontal glass washing machine BAVELLONI HW 2200 Year of production: 2022 Maximum glass working width: 2200 mm 3 pairs of brushes (6 pcs.) As new condition ! Rjdpfxjytgi Ds Aizou Very little used ! Available immediately

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Redpfex Hff Ssx Aizsu

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Rjdpfx Aioxcx A Tezsu

Condition: used, • Technical Data: • Washing width – 2800 mm • Support height – 900+/-30 mm • Min. glass dimensions – 360 x 300 mm • Max. glass dimensions – 4800 x 2800 mm • Glass thickness – 2-19 mm • Transport speed – 2-13 m/min Redpsw Adn Rjfx Aizju • Operator side – left • Adjustable upper frame height extendable up to – 400 mm • Number of spray units – 2 pcs • Number of washing units – 2 pcs • Number of drying units – 5 pcs • Brush roller adjustment – pneumatic • Machine width – 3760 mm • Machine length – 3480 mm • Machine height/with blower platform – 1480 mm / 3900 mm • Price on request

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Redpeyfrvysfx Aizju Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! Rjdpfx Aieqc Udijzju 8 brushes, Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Rodpfxewd N Urj Aizsu Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Rsdpfswd Raisx Aizou Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection