Used Vertical Slotting Machine for sale (66,265)

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. B axis +/- 120 degrees, C axis 370 degrees, Kdjdpfx Abozcv T Djfjn Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: Kodpfex Iikbex Abfjdn - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: good (used), Year of construction: 2007, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, overall weight: 4,700 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, Control system: Ultimax 4 Distance from spindle center to table: 150 - 760 mm Kedszcu R Uepfx Abfedn Drive power – main spindle: 7.5 kW Tool holder: SK 40 Table clamping area: 760 x 510 mm Max. table load: 700 kg Tool changer with 24 stations

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Kdsdszcu Imepfx Abfon

Condition: good (used), Year of construction: 2004, Vertical machining center, Mazak VCN-510C, manufactured in 2004. Kedpfx Abszcu D Uefsdn

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Ksdpfx Aezd Dv Ijbfsdn Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Kdodpfx Aozd Dvnebfen Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. Ksdpezcrfpefx Abfsdn The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Kedey At Iyjpfx Abfodn Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Ksdpfszd Dfisx Abfedn

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Neptun LV 1600, a 1600mm vertical glass washing and drying machine. Working direction: from right to left Maximum washable glass height: 1600mm Number of brushes: 4 (not suitable for low-e glass) Drying fan Kdjdpfx Aszd Ax Uebfon Stainless steel housing Water heating Backlighting Stop sensor The machine is in used condition as shown in the pictures and can be inspected at our premises.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,200 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 900 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 50 kVA, controller manufacturer: Fanuc α 30/3000i 7.0, workpiece length (max.): 4,000 mm, workpiece width (max.): 1,350 mm, workpiece weight (max.): 8,000 kg, total height: 4,500 mm, total length: 8,130 mm, total width: 4,150 mm, table width: 1,200 mm, table length: 3,200 mm, table load: 8,000 kg, overall weight: 17,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, mount diameter: 50 mm, tool length: 350 mm, tool diameter: 127 mm, tool weight: 20 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pinnacle DV 1432 Kdodpeyhpcvsfx Abfon cooling system integrated into the spindle.

Condition: new, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- Kdsdpfeytx T Isx Abfsn (technical data according to manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 9,999,999 h, functionality: fully functional, machine/vehicle number: 11898, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 32 kVA, controller manufacturer: Heidenhain, controller model: TNC 430, total height: 2,930 mm, total length: 2,700 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, table load: 1,500 kg, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 999,999 h, coolant supply: 3 bar, spindle motor power: 10,500 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Hermle C800V X=800 Y=600 Z=500 Kdedpfszd Aimjx Abfen Table size 1000x560 Table load 1500kg Machine is fully functional. Sold without clamping devices. 15,000 1/min, SK40. HDH TNC430, (without coolant through spindle, without chip conveyor). The machine can be inspected in production until June 24th, or by arrangement. Delivery is included within a 300km radius of Bonn, to the curb, without unloading, between June 30th and July 9th. For greater distances, the difference must be covered by the buyer. This offer is only valid for buyers from Germany. Machine location near Bonn.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Kodpjzd Aigjfx Abfodn Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, We are selling a beautiful and well-maintained machining center from Fehlmann, a Picomax 60-M HSC. Machine data: Manufacturer: FEHLMANN Machine type: PICOMAX® 60-M Machine number: 14508674 Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Operating hours: 12,799 Spindle hours: 5,303 Technical details: Travel in X-axis: 505 mm Travel in Y-axis: 355 mm Travel in Z-axis: 610 mm Spindle speed: 50 - 20,000 rpm Number of tool positions in the tool magazine: 24 Tool holder: SK30 Dimensions and weight: 2.0 m × 1.7 m × 3.0 m // 3350 kg Accessories for the machine: - Renishaw touch probe system OMP 40-2 with spindle adapter - Cold air nozzle for M-function, switchable - Direct path measurement system with compressed air supply - Thermal compensation - Compensation of spindle and thermal expansion - Ethernet interface Kdedszcqtropfx Abfjn - Laser system NT incl. blow-off nozzles for tool measurement and breakage check - 4th/5th axis FEHLMANN ATS 160 CNC automatic indexing table with double clamping in both axes and EROWA quick-change chuck ITS - Machine light - Spindle cooler - Handwheel - Coolant system with chip drawer and fine chip insert - Tools in the lower cabinet - Transport securing - Operating and programming manual (also for optional equipment) Software options: - HSC-SETUP cycle (axis optimization) - Potential equalization milling spindle - Alignment cycle for automatic alignment of the ATS - Engraving of uppercase and lowercase letters and special characters - Rotary table machining (in mm/min) - Fast 3D machining, 5-axis interpolation, spline interpolation - Extended energy-saving function and warm-up spindle + axes

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Victor Vcenter P106 – Vertical Machining Center High-performance vertical machining center Rapid traverse rates: 48 / 48 / 32 m/min Spindle speed: 12,000 rpm Spindle power: 18.5 kW (S3 duty) Tool holder: BBT-40 Tool magazine capacity: 30 tools Kdsdpoy A Eufofx Abfen Roller guideways for superior rigidity and precision Full bottom guarding with coolant flush system Screw-type chip conveyors

Condition: good (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain 530, controller model: Heidenhain ITNC 530, rotational speed (min.): 8,000 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 20 bar, number of spindles: 1, input voltage: 29 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C80, used, fully operational. The machine has always been maintained by Hedelius over the years to keep it up to standard. (New spindle, new guides, etc. – invoices and documentation available) Kdodpfxsy Rmv Hj Abfen Spindle hours: 14,000 h 3-axis machining Coolant filtration system Pendulum operation, mountable partition available Heidenhain 530 ICS 20 bar (internal cooling) Handwheel Measuring probe SK 40 Tool changer Total weight: 15 t, Transport dimensions approx. 6500x3000x3000 mm

Condition: ready for operation (used), Year of construction: 2006, DMG DMC75V linear, machining center, 5 axis Year: 2006 x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg Kjdsytd E Nopfx Abfjdn max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m Accessories/options: - including Fanuc robot - including palettizing system - 28000 rpm Kessler spindle - Through spindle coolant - Swarf conveyor - Clamping system Vice with jaws - full set of manuals

Condition: used, Year of construction: 2008, Technical details: x-travel: 850 mm y-travel: - mm z-travel: 315 mm swing diameter: 420 mm spindle speed:: 3400 U/min feed power: 11 kN tool taper: VDI 50 workpiece height max.: 160 mm workpiece diameter:: max. 340 mm tool changer with: 12 places feed power: 11 kN Total power requirement: 45 kW Weight approx.: 10 t complete plant: 5,3 x 4,19 x 3,5 m dimension machine xH: 3,8 x 1,45 x 3,5 m Kdjdpfxozcn Tpe Abfjn • Highly productive CNC vertical turning machine • Perfect for high-volume and mass production • Loading time: 4–6 seconds (depending on workpiece and clamping device) • Chip-to-chip time: 8–10 seconds (depending on process and workpiece) • Spindle nose: DIN 55 026 – Size 11 • Front spindle bearing diameter: Ø 160 mm *

Condition: used, Year of construction: 2007, Technical details: x-travel: 680 mm y-travel: - mm z-travel: 250 mm swing diameter: 340 mm spindle speed:: 3400 - 4300 U/min tool changer with: 12 places Ksdpfozcn Tcox Abfedn spindle diameter in front bearing: 120 mm rapid traverse x + z axis: 45 / 30 m/min Total power requirement: 43 kW Weight approx.: 12 t complete plant: 9,0 x 4,0 x 3,3 m dimension machine xH: 3,8 x 1,5 x 3,3 m • Highly productive CNC vertical turning machine • Perfect for high-volume and series production • Commonly used in the automotive industry • Includes various accessories and live tooling (powered tools) *

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 9,5 t Kjdpfxjzcnq Ie Abfsdn

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Kedoy Idpxepfx Abfsdn

Condition: good (used), High-precision CNC rotary dividing table, fourth axis, manufactured by Tanshing CO, model MRNC-255HB. Table diameter: 255 mm, load capacity: 250 kg horizontally and 100 kg vertically, spindle bore: 32 mm... Kdsdpfsy Av Ngsx Abfon

Condition: excellent (used), Year of construction: 2006, 5-axis mobile crossbeam numerical control work center. JOb LINX COMPACT. Numerical Control: Siemens 840D. Year 2007 "CE", Machine works in 5 axes and has 2 electro-spindles: 1 Electro-spindle at 24000 rpm. 1 Electro-spindle at 8000 rpm. Working stroke: X-X1 axis: 6200 mm Kedpewhlrzjfx Abfodn Y-axis: 3200 mm Z-axis: 1250 mm C-axis: 400 (+-200°) A-axis: 190° (-90 / + 100) Machine dismantled in accordance with the rules of the art. Machine in perfect mechanical/electronic condition. Possibility of loading on vehicles. Technical data in attachment.