Used Veneer Production for sale (16,564)

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Guodpfx Ajyxp Twogfja Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Gusdex Upgcepfx Agfoa

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Gujdjyu Sl Topfx Agfea

Condition: good (used), SIMIPIANTI COLD PRESS WITH MOVABLE UPPER PLATENS LOWER PLATEN: DIMENSIONS 1800x1215mm With rollers in the platen for panel conveying UPPER PLATEN IN 2 SECTIONS: 1800x600mm Guodpsyk Hzujfx Agfoa OPENING BETWEEN THE 2 PLATENS: 650mm

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press size: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Robust construction Ideal for veneer work and panel bonding From location Gedpfjyu Sifjx Agfjua The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Shipping available at extra cost!

Condition: not inspected (used), functionality: unexamined, A-15025-Benhil Packing Machine Type 8380 Manufacturer: Benhil Capacity: Approx. 2,400 portions/hour Power: 0.85 kW Weight: 1,500 kg Foil wrapping machine for packing butter, margarine, and cheese into aluminum foil or parchment paper. Guodpfx Ageyu H Ezjfsa The format on the machine is 250 grams, 100 x 75 x 35 mm. Capacity: up to 40 portions per minute. Machine inspection required. Condition: Used Availability: In stock Delivery: Worldwide shipping available

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3029098, total width: 1,100 mm, total length: 2,500 mm, total height: 2,000 mm, Equipment: type plate available, Manufacturer: PIM Ltd. Country: Bulgaria Machine type: Cheese formation machine Capacity: 600 kg/h Year: 2019 Serial number: 3029.098 Material: Stainless steel Application: Dairy processing / cheese production Applications Suitable for: White cheese production Feta type cheese Dairy processing plants Gujdpfx Aeyxkpgogfea Cheese forming and molding

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven Gjdpsvy Txzsfx Agfoua - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer

Condition: excellent (used), Year of construction: 2016, ELOPAK Shikoku S-PS60EC Carton Filling Machine Year: 2016 The ELOPAK Shikoku S-PS60EC is a reliable, industrial-grade carton filling machine designed for the forming, filling, and sealing of gable-top cartons for liquid food products. Manufactured by Elopak in cooperation with Shikoku Kakoki, this machine reflects the proven engineering and hygiene standards for which both companies are globally recognized. Key Capabilities: -Gable-top carton forming, filling, and sealing in a single integrated system -Suitable for liquid products such as milk, juices, water, and other chilled beverages -Designed for medium-to-high output production, typically up to ~6,000 cartons per hour (depending on configuration and carton size) -Compatible with common carton volumes, generally ranging from 250 ml to 1,000 ml -Blank-fed operation with precise carton forming prior to filling -Hygienic & Robust Design The S-PS60EC is built for food-grade production environments, featuring: Gjdpfx Agsyxgxksfjua -Stainless steel construction in product contact areas -Hygienic design suitable for dairy and beverage applications -Automated filling accuracy and consistent sealing quality -Designed for clean-in-place (CIP) integration, depending on configuration Cartoning Machine is located at former dairy in the South of Ireland. The machine is still on location and viewing can be arranged. The site is reachable by Shannon International Airport & Cork International Airport. Contact for more information.

Condition: not inspected (used), A-15015-Benhil Packing Machine Type 8380 Manufacturer: Benhil Capacity: Approx. 2,400 portions/hour Power: 0.85 kW Weight: 1,500 kg Foil wrapping machine for packing butter, margarine, and cheese into aluminum foil or parchment paper. Machine format size: 250 grams, 100 x 75 x 35 mm. Capacity: up to 40 portions per minute. Machine inspection required. Guedpfxsyuyfus Agfja Condition: Used Availability: In stock Delivery: Worldwide shipping available

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Gujdpsyuyl Isfx Agfoa Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4712, functionality: fully functional, pressing force: 120 t, number of cylinders: 6, cylinder diameter: 90 mm, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Gedpfxoyuxh Ie Agfsua Complete line with: Loading system Gluing machine Destacker High-frequency cabinet (offered separately)

Condition: good (used), Year of construction: 2008, BVT line for ciabatta, baguettes, and high-hydration bread - used Gjdpfxjyxf Dlo Agfjua - year of manufacture: 2008 - entirely stainless steel construction - computer controlled - good technical condition - machine from production - components: hopper with portioner, oiling unit, pre-forming conveyor, 2 extruders, satellite calibrator, moistening station, seed sprinkling module, rustic baguette rolling unit, conveyor belt, longitudinal cutting station, guillotine, discharge belt - collection from warehouse / shipping optional - price on request

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, HSM - T - DRIVE - CL - R4 - SV - 30/26. Year of manufacture: 2020. Equipped with ContourLine-Classic welding technology as well as V-system. The machine is in continuous operation and fully functional. Capable of welding frames and sashes, as well as frames with threshold. Minimum welding dimension: 490 mm x 497 mm. Maximum welding dimension: 2690 mm x 3100 mm. Welding process is 100% controlled by servomechanism. Programming via touchscreen. High-temperature welding. Quick-change welding foil system. Quick-change pad system. Diagonal or parallel joining process. Individually programmable welding parameters. CE-compliant safety device. Horizontal take-off unit. Godpfew U Nlwex Agfoua

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, HSM-3026-TURBO-T-DRIVE-CL-R4-SV Year of manufacture: 2022. The machine is in continuous operation and fully functional. Equipped with ContourLine-Classic and V system welding technologies. Capable of welding frames and sashes. Minimum welding dimension: 450 mm x 450 mm. Maximum welding dimension: 2900 mm x 2900 mm. Welding process is 100% servo-controlled. Programming via touch screen interface. High-temperature welding. Quick-change welding foil system. Quick-change pad system. Ability to perform both angled and parallel joining processes. Gsdpfx Agjw U Rycjfsua Individually programmable welding parameters. CE-compliant safety device. Horizontal take-off unit. Cleaning device equipped with a hinge drilling unit.

Condition: used, Year of construction: 2012, functionality: fully functional, Tetra Therm aseptic plate pasteurizer for beverages, temperature up to 125 degrees, capacity between 6,000 – 12,000 liters/hour, in good condition, deaerator included. Previously used for juice and tomato sauce. Godpfeyxdlbsx Agfjua

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. Gedpfx Aexmiirogfeua CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 050544, total width: 1,750 mm, total length: 3,350 mm, total height: 2,050 mm, empty load weight: 750 kg, input voltage: 400 V, Equipment: cooling unit, type plate available, Manufacturer: Milkplan Model: MPP-5000 Machine Type: Milk Cooling Tank Capacity: 5224 L Year of Manufacture: 2016 Refrigerant: R404A Construction: Stainless Steel Control System: Digital temperature control Certification: CE Applications Suitable for: Milk cooling Milk storage Dairy farms Milk collection centers Dairy processing plants Gsdjyxa N Ajpfx Agfjua

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 7013035, total width: 1,950 mm, total length: 4,000 mm, total height: 2,100 mm, Manufacturer: PIM Ltd., Bulgaria Gujdsyxa A Nepfx Agfea Model: MPP6000 Machine Type: Milk Cooling Tank / Milk Cooling Bath Volume: 6000 L Year of Manufacture: 2019 Serial Number: 7013.035 Material: Stainless Steel Certification: CE Applications Suitable for: Milk cooling Milk storage Dairy processing plants Milk collection centers Food processing facilities

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 700013, Manufacturer: PIM Ltd., Bulgaria Machine Type: Milk Homogenizer Serial Number: 7008.013 Capacity: 5000 L/h Year of Manufacture: 2019 Construction: Stainless Steel Application: Milk and dairy product homogenization Guodpeyxayuofx Agfea Certification: CE Marked

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Gusdpfx Aexgbwzogfea FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer Gujdpfx Aeyutxnsgfoa - will be delivered to stock 54634 Bitburg -

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit Godpfx Aeyw Tmljgfjua 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in very good condition. The PowerSquare is not only versatile, but also extremely easy to operate and produces unbeatable professional brochures. • Booklet maker for brochures up to 56 sheets / 224 pages at 80 gsm • Heavy-duty wire stitch head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment • 2 new front edge trimmer blades • 1 - 6 stitches, evenly distributed on the spine. Production of brochures without staples also possible. Gjdpfoxn Rdajx Agfeua • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and operates without defects • Fully automatic machine setup • Immediately operational / production starts from brochure 1 • Test run possible by arrangement • Automatic triggering • 230 Volt / 600 kg • Format range from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224. Euro 27,900.00 plus VAT. Shipping / delivery available. Please note our offers refer to used machines, which may show signs of previous use (minor scratches or discoloration). Collection possible, shipping possible, installation and instruction available.

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Guedpfx Ageyw H H Ssfja Water heating