Double knife veneer guillotine

Josting ZFS2800

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Nlsdpfst Akcfjx Af Seg

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Nedpfx Aow I E Dpsf Selg

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Nlodpfovxvc Hox Af Seg Very good condition. Available immediately.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 Nlsdpfx Afed Tyvxs Seg - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Nlsdexpn Tnopfx Af Sjg Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: used, Savi shear, working width 700 mm Nledpfx Asq Tx R Njf Ssg

Condition: new, Year of construction: 2026, Extraction capacity approx. 5200 m3/h Motor power 3.0 kW Rotational speed 3000 rpm Rated voltage 400 V, 50 Hz Extraction port 250/200 mm Extraction speed 28 m/sec. Number of filters 28 Negative pressure 2800Pa Filter category G Nlodpfolkd Sdox Af Sog Polyester filter material Sound level 80 dB without connection / 65 dB when connected through The pipe to the machine Filtration area 13.7 m2 Dimensions (L x W x H) 2000 x 750 x 1980 mm Weight 182 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Chips and bark sorting screen, screening area 6,7 m2, el.motor 3 kW, capacity up to 150 m3/h, delivery includes metal frame. Njdpfxjwktyfs Af Sjlg

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Nedpfx Afjvvlyio Solg Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 4000 mm Width: 1180 mm Nljdjri Skwopfx Af Sjg Height: 1700 mm