Used Vbmt Turning Plate for sale (18,050)

Condition: used, machine/vehicle number: B.739, Outer Ø: 400 mm Bore: 95 mm Flange width: 100 mm Nodpeb Nzi Iefx Ahvjcp Short taper size 6 Weight approx.: 52 kg

Year of construction: 1963, condition: used, machine/vehicle number: 63731, working width: 1040 mm metal sheet thickness: 12 mm Ncjdpfeb N Ektsx Ahvep rear stop: von Hand bis 500 mm power: 380 V, 11 kW space needed: 2500 x 2150 x 1900 mm weight: 4100 kg

Condition: ready for operation (used), Plate size: 170 x 480 mm plate height: 95 mm changing pole spacing: 12,5/25 mm Nedpfod Ef S Eox Ahvscp electr. connection: direct current 110 V

Condition: excellent (used), Table surface: 1610 x 970 mm table top thickness: 90 mm on base frame, total height: 860 mm Nsdpsd Eznqjfx Ahvjcp Weight: 960 kg

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm Ncjdebx Elispfx Ahvop space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW

Condition: ready for operation (used), Plate size: 1500 x 1000 mm Nedsx S H Rmjpfx Ahvocp Plate thickness including ribbing: 108 mm Top plate thickness: 38 mm Table height above floor approx.: 1000 mm Weight: 800 kg

Condition: ready for operation (used), Plate size: 2000 x 1000 mm Plate thickness including ribbing: 250 mm Nedpfox S H I Ssx Ahvecp Top plate thickness: 30 mm Table height above floor: 870 mm Weight: 1000 kg including intermediate plate, 1700 x 650 mm

Condition: ready for operation (used), table size: 1450 x 2000 mm plate thickness: 40 mm table height over base: 800 mm weight: ca. 1200 kg Ncsdpfjtp Hg Eox Ahvjp

Condition: used, Year of construction: 1988, Plate size: 2120 x 1400 mm Ncjdpfew Hxkzox Ahvsp Plate thickness: 320 mm Actual value: 4 mµ Target value: 5 mµ Table height above floor: 900 mm Weight including base frame: 2849 kg

Condition: new, Faceplate diameter: 300 mm Bore: 80 mm Nsdpfsxazpwox Ahvscp Mounting taper, short taper according to DIN 55027: size 6 Faceplate width: 80 mm

Condition: ready for operation (used), Plate size: 2000 x 2500 mm Plate height incl. ribbing: 250 mm Weight: Nsdpfx Ahoxlg T Sjvjcp

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm Nodpfx Ajxrp Thjhvecp weight: 5200 kg

Condition: excellent (used), Plate length: 2000 mm Ncsdpfjucdcqex Ahvop Plate width: 1500 mm Plate thickness: 50 mm Plate height above floor: 770 mm Weight: approx. 1500 kg

Condition: ready for operation (used), Plate size: 1820 x 1900 mm Nsdohcr I Tspfx Ahvjcp Plate thickness: 405 mm with 20 mm offset surface: 405 x 1820 mm 2 upright granite columns Width / length / height: 350 x 600 x 1400 mm 2 holes in the broad side 230 mm and 2 holes 150 mm Total weight: 5300 kg

Condition: ready for operation (used), 2 pieces of measuring and control plates made of black granite, each with 4 holes in the broad side Support surface on the narrow side: 1400 x 350 mm Ncedpfxohc S Rge Ahvsp Support surface on the broad side (with the holes): 1400 x 600 mm 2 holes 230 mm Ø 2 holes 150 mm Ø Weight approx. 0.7 t

Condition: ready for operation (used), Plate size: 1900 x 1820 mm Plate thickness: 405 mm Ncsdpfx Ahjhc S Rnsvep with 20 mm offset surface: 1820 x 385 mm Weight approx .: 4 t

Condition: good (used), Length: 1000 mm Nsdpsf D Sp Sefx Ahvocp Width: 600 mm Plate height including ribbing: 135 mm Plate edge height: 35 mm Weight: 152 kg

Year of construction: 2000, condition: used, Della Toffola NF5 mobile kieselgur plate filter 5 m², Aisi 304 - condition: used - location: Bremen - total height: 1.890 mm - total length: 1.200 mm - total width: 2.100 mm - remarks: - Working pressure: +6 Bar; - material in contact w/ medium: Aisi 304; - filter medium: diatoms; 240 l tank with agitator for preparing the diatoms; - agitator arranged eccentrically in the upper bottom; - Agitator element: anchor agitator; - mobile frame on rollers with brake; - Weight: 510 KG Njdpfx Aot Ebizshvscp

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm remarks: - Filter medium: diatoms; Ncsdpst Eb Azefx Ahvjp - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm;

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control Ncsdex E Dncspfx Ahvop - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: good (used), Year of construction: 1975, working width: 3,700 mm, cutting angle (min.): 2 °, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 12 mm, back gauge: 1,000 mm, oil tank capacity: 500 l, overall weight: 18,400 kg, total length: 4,500 mm, Equipment: documentation/manual, finger protection, For sale: 1 used hydraulic guillotine shear Manufacturer: Darley Model: GS3660x16 Year of manufacture: 1975 Technical Data: Distance between uprights: 3860 mm Cutting angle: 2° Hold-downs: 18 pcs. Oil capacity: approx. 500 l Total power requirement: 22 kW Weight: 18,400 kg Back gauge: 1,000 mm Equipment: - electric back gauge - cutting line illumination - front finger guard - ball rollers on the support table - side gauge Ncedpfjxfkr Sjx Ahvep - support arms - movable foot switch - operating manual

Condition: used, Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, We offer a used face turning lathe PORĘBA TR-100C in good technical, fully working condition. Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Ncsdpjydpvzofx Ahvjp Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Nedpfx Aheywdm Asvecp Flexible speed control.

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm Nedpfx Ajxq Hkzohvjcp rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the Ncedex Ik Tdopfx Ahvep scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!