Used Vbmt Turning Plate for sale (18,259)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Ncodpfoywuihjx Ahvep Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Nodewufc Tjpfx Ahvscp Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, For sale: two fully operational Tsugami HS20M 5-axis machines. Everything is in working condition, recently serviced and technically inspected. Included: various tool holders, Ncsdpfxeyghcrj Ahvep full technical documentation. These machines were primarily used for manufacturing dental implants and were sourced from Sweden. If interested, please contact me for further details, photos, pricing, or to arrange an inspection.

Condition: good (used), functionality: fully functional, Center height 110 mm Nsdpfxeywtd Ds Ahvscp Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation

Condition: good (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale Nodsyu U Dlopfx Ahvscp - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Condition: good (used), Year of construction: 2012, operating hours: 22,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Brand: STAR Model: SR-32J Ncjdpfxeyu Uhwe Ahvsp Year: 2012 with: FANUC 32i control Backworking unit Synchronous spindle Driven tools C-axis Oil mist extraction system Fire suppression system FMB TURBO 3-36 bar feeder

Condition: excellent (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, CNC Turning, Drilling and Milling Center Klaaßen SDM15-5 Versatile machining center for comprehensive turning as well as complex drilling and milling operations. Turning diameter: 1,500 mm Center distance: 4,500 mm X-axis travel: 1,000 mm Y-axis travel: 350 mm Z-axis travel: 5,000 mm - 4-guideway bed machine Ncjdpfx Ajywqf Ejhvsp - Powerful spindle head with backlash-free C-axis - Full-featured 3-axis milling (Y-axis = 340 mm) - Direct measuring system on every CNC axis - Continuously adjustable motor milling spindle - Klaaßen motor milling spindle, 37 kW / 4,000 rpm / 330 Nm (S1) - Automatic tool changer for turning and milling tools - Steadies and tailstock fully traversable - Internal milling head - Grinding support - Comprehensive accessory package available The machine has been regularly serviced and is in excellent technical condition. Technical drawings and parts lists are available for the components and assemblies of the machine. Documentation and technical data are available for all machine units.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Ncsdjyu Rzgopfx Ahvsp -Mounting plate: with support ribs, on a solid base cabinet -Length: 2000 mm -Width: 1420 mm -Plate: with supporting ribs, plate thickness 35 mm -Base cabinet: 6 cabinet doors / shelves (see photos) -Overall dimensions: 2000/1420/H920 mm -Weight: 1080 kg

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Ncjdpfew Nwfbox Ahvep Y axis (+/-105mm), C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: used, functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 260 mm, roller diameter: 360 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 900 mm, sheet thickness (max.): 23 mm, sheet thickness steel (max.): 20 mm, overall weight: 10,000 kg, total length: 4,100 mm, total width: 1,750 mm, total height: 1,550 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4-roll plate bending machine Imcar-Italy year 1995, model 4RH12/3 , capacity 2000 x18/23 mm TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 16 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Nedeyu N Rtjpfx Ahvocp Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed -----

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Ncedpfx Aovzahxshvjp Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 25 kVA Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Nedpfx Aheyu Nr Dovscp Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: good (used), Year of construction: 2013, operating hours: 35,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type lathe Make: STAR Model: SV-32 Year: 11/2013 with: FANUC 16i TB control backside machining synchronous spindle turret driven tools C-axis Nedpfsyu Nqyex Ahvocp high-pressure pump fire extinguishing system chip conveyor bar feeder magazine FMB TURBO 3-36

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Additional tooling: • Capto C3 straight holder: 2x Ncedpfoywllyox Ahvep • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5

Condition: excellent (used), functionality: fully functional, control type: CNC control, Thank you very much for your inquiry regarding the Faccin 4-roll CNC bending machine, which has seen very little use. The machine will be sold soon due to internal restructuring. It is in excellent condition. Electronically controlled, hydraulic four-roll bending machine Manufacturer: FACCIN, Model 4 HEL/2122 Technical specifications: Number of rolls: Four Roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force on the top roll: 100 tons Rated power requirement: 9.2 kW (12.5 HP) Rated maximum rolling speed: 4–8 m/min Machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: For a yield strength of 260 N/mm²: Rolling capacity (full working width): 11 mm Bending capacity (full working width): 8 mm from a minimum pipe diameter of 1,100 mm Rolling capacity (full working width): 8 mm Bending capacity (full working width): 6 mm from a minimum pipe diameter of 286 mm Standard features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-articulated joint bearings EPS parallelism system Hardened rolls for high wear resistance Nsdpjywk Uyefx Ahvocp All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-quality hydraulic and electrical components Safety pull-cord with emergency stop and CE certification Central lubrication Cone bending device The machine will be available for sale from the end of April.

Condition: like new (used), functionality: fully functional, Very nice Schaublin 102VM from a government instrument workshop. Equipped with HEIGHT SUPPORT and both traveling and fixed steadies. Unique machine with Sony readout. Ncodpfoywk Ugjx Ahvsp

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Maximum turning diameter: 2000 mm Maximum turning length: 1400 mm Control: Okuma OSP - P300 SA Maximum workpiece weight: 10,000 kg Maximum workpiece dimensions: 2000 mm x 1400 mm Chuck diameter: 2000 mm C-axis positionable to 0.001° Ncsdpfx Ahsywg Aaevep Tool spindle traversable in X/Y/Z and indexable in B B-axis swivels up to 150° Y-axis travel: 1600 mm (+/- 800 mm) Coolant supply through tool spindle Automatic double pallet changer Tool stations: 60 pcs, HSK 100

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Njdpfsc Idn Usx Ahvecp Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Condition: good (used), Year of construction: 2017, Refurbished: 2017 Format: max 360 x 650 mm; min 80 x 100 mm Folding capacity: max 150 m/min Power requirement: 2 kW (220/380V, 50Hz) Length: 2,130 mm Width: 1,230 mm Height: 1,500 mm Net weight: 370 kg (approx.) Equipment - Flat pile feeder with Tremat suction head - Counting device 1st folding unit: - 6 buckle plates - FESTA folding roller adjustment Njdpsqrq Hvofx Ahvjcp - Downstream slitter shaft - Noise protection device 2nd folding unit: - Hook-on knife folding unit - FESTA folding roller adjustment - Delivery Accessories: - Operating instructions - Electrical circuit diagrams - Spare parts catalog - Standard tool Condition - as is, cleaned available - immediately

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: Njdpfjc Rhvtjx Ahvjcp • 4 buckle plates • Festa foldingrolleradjustment • noise prevention

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment Ncsdpfx Aed Iq S Rjhvsp • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 • upright stack delivery with pressing SBP 66

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates • Festa foldingrolleradjustment Nodjhf Aw Uopfx Ahvscp • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries • attachable belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit Njdpfx Ajdymm Hehvocp • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Ncjdpfx Aefbff Uohvep Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat Njdpfx Ahjd Iq S Uovecp 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46