Used Used Machining Centers for sale (92,355)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,150 h, functionality: fully functional, machine/vehicle number: 30017409, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece weight (max.): 600 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Simultaneous Milling Machine Hedelius RS80 S with Heidenhain I TNC 530 Operating Hours Program Run: 25,130 hours (still in operation) Spindle: 300 hours Speed Range: 30 – 8,000 rpm Power (approx.): 25 kW Torque (approx.): 244 Nm Internal Coolant Supply (IKZ): 25–70 bar Tool Holder: SK 40 DIN 69871 AD Tool Magazine: 30+190 additional stations Encapsulated Heidenhain Linear Measuring System: Direct in X/Y/Z/A/C Travel Range (XYZ): 800 / 800 / 600 mm Rapid Traverse X/Y/Z: 40 m/min NC-Swivel Rotary Table: A-axis: +95° / -95° C-axis: 360° Clamping Surface: ø800 x 630 mm Table Load (max.): 600 kg Equipment/Accessories: Chip conveyor Slant-bed coolant system SKM 1250 L Lodpswl Dy Eofx Ad Nshb High-pressure coolant pump IKZ 70 bar Rinsing pistols Hydraulic clamping/release on the table via M command, 2 units Workpiece touch probe: Infrared probe M&H Blum laser tool measurement and system for diameter and length Full enclosure work area hood with shutter 2 electrostatic air filters LTA type AC 1000 Internal cleaning system Automatic door interface for automation Setup mode: Electronic handwheel Heidenhain 410 Under power for inspection

Condition: ready for operation (used), Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible. Ljdpfx Adsycwq Re Njhb

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Ljdpfx Aeycwrbjd Nehb

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 42,000 m/min, rapid traverse Y-axis: 42,000 m/min, rapid traverse Z-axis: 42,000 m/min, controller manufacturer: FANUC, controller model: i-Series, BRAND: HYUNDAI-WIA MODEL: F-600D CATEGORY: VERTICAL MACHINING CENTERS (ROTARY PALLET SYSTEM) YEAR OF MANUFACTURE: 2018 CNC CONTROL: FANUC i-SERIES MACHINE WEIGHT: 10,000 kg MACHINE DIMENSIONS: Length: 3,904 mm, Width: 3,970 mm, Height: 3,080 mm Spindle Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (continuous/30 min): 15/18.5 kW Working Capacities X axis: 800 mm Ljdpfx Adexxl Egs Nohb Y axis: 600 mm Z axis: 600 mm Distance spindle - table surface: 200 - 800 mm Distance between column and spindle center: 690 mm Table Table dimensions: 2 x (900 x 650 mm) Number of tables: 2 Table load capacity: 2 x 500 kg Table change time: 8.5 sec Feedrates Rapid feedrate (X/Y axes): 42,000 mm/min Rapid feedrate (Z axis): 42,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 30 stations Max tool diameter (adjacent/non-adjacent): Ø 90 / Ø 150 mm Max tool length: 300 mm Max tool weight: 8 kg Accessories Chip conveyor Coolant collecting tank with pumps High-pressure coolant pump through spindle line Spindle line air conditioner Manuals, electrical schematics, and CE Declaration This model stands out among those you have provided as a Vertical Machining Center equipped with a Rotopallet system (two independent tables) and a very high rapid traverse rate of 42,000 mm/min.

Condition: excellent (used), Year of construction: 2017, Machine model: ALZMETALL GS 1200 Year of manufacture: 2017 Technical specifications: 1. Machine concept: · Gantry design for closed force flow · All dynamically stressed components made of spheroidal graphite cast iron EN-GJS 500 (GGG50) 2. Working area: · X-axis travel: 1000 mm · Y-axis travel: 1200 mm · Z-axis travel: 800 mm · Distance spindle–rotary table min./max.: 167 mm / 967 mm 3. Control system: · Contour control: Heidenhain TNC 640 with digital drive control · Control panel: rotatable and pivotable · 19" TFT color flat screen with touch pad · Hard disk, linear and circular interpolation, helical interpolation, 3D interpolation · Look-ahead function (1024 blocks) · Standard drilling and milling cycles, probing cycles · Parallel operation, file management · Programming in Heidenhain plain text and DIN/ISO · Graphical support for free contour programming · Multiple zero point tables · Interfaces: 1× V.24/RS-232-C (up to 115 kbit/s), 2× Gigabit Ethernet (1000 Base-T) 4. Lubrication: · Central grease lubrication for all axis guides and drive systems · Permanent grease lubrication for the high-frequency motor spindle · Lubrication interval control via PLC 5. Coolant and chip removal: · Only coolant with a high mineral oil content allowed · No synthetic or semi-synthetic agents · Cooling system designed for water-based agents · For emulsions: flash point > 140°C · Fire protection requirements for oil-based agents and flammable materials (e.g. magnesium) 6. Hydraulics/Pneumatics: · Hydraulics: max. 140 bar, max. 6.8 l/min · Pneumatics: 2 channels, max. 8 bar, max. 4.8 l/min 7. Accessories/Options (selected items): · Electronic handwheel HR 510 (portable) · 3D probing system with infrared transmission (M&H Inprocess, type IPR 40.01) Lhjdjyag Tvjpfx Ad Njb · Safety foot confirmation switch for setup mode · Continuous air operation without lubrication interval (max. 10 bar pressure) · Rinsing hose with spray gun incl. pump · Preparation for stationary extraction system (2 units, manufacturer Reven) · Production package C: chip conveyor with coolant tanks, band filter, pumps · Safety laminated glass window, automatic roof cover 8. Machine enclosure: · Full enclosure made of sheet steel 9. Table data: · Max. table load: 2500 kg (balanced) · Rotary diameter on C around center A-axis: Ø 1220 mm · Swivel diameter on A around center X-axis: Ø 1240 mm · Rotary table C-axis below center A-axis: max. 100 mm 10. Tool changer: · Max. tool weight per chain: 250 kg · Chip-to-chip time: approx. 7 s Reference tool Ø 2/1. DS6, in HSK T100 holder

Condition: used, Year of construction: 2000, machine/vehicle number: 10990001153, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, Travel paths: Lsdjycvvlopfx Ad Nohb X-axis: 1800 mm, Y-axis: 2000 mm, Z-axis: 1100 mm Tool holder: HSK 63 Table size: 1700 x 1400 mm max. table load: 5000 kg

Condition: used, Year of construction: 2001, operating hours: 58,458 h, machine/vehicle number: 15035704944, Hour meter: - 58,458 hours - 38,450 hours Equipment: - 1 compact filter system (Interlit, SUK 200 - 900) - 1 linear control unit (Heidenhain TNC 430) - 1 2-axis NC rotary tilt table (700 x 500 mm) - 1 vertical tool changer with 32 stations (HSK 63) Note: - Machine is sold without tool holders, etc.!!!! Defects: - Hoses of the external coolant supply need to be replaced. - Interlock switch needs adjustment. Note: Ledpeycvuhsfx Ad Nohb - Linear bearing for slide (Y-slide) - new in 2025 (approx. net €10,000) ATTENTION: - Additional item 219 = 1 hydraulic unit (for DMU 70) (in the container - outdoor area) - (starting price: €80.00) Note: The buyer is responsible for pumping out and disposing of the coolant (approx. 200 liters)!!!

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1000025340, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Biesse BH 660, bSolid, bEdge, workpiece height (max.): 60 mm, Short Description • X axis working area: 6735 mm • Y axis working area: 1650 mm • Working Table: Pod and Rail • Main Electrospindle Power: 13.2 kW • Number of Controlled Axes: 4 axes • Max Edge Height: 60 mm • Total Number of Drilling Spindles: 20 • Total Number of Tool Changer Positions: 16 Long Description • Subfamily: CNC Machining Centers for Routing, Drilling, and Edgebanding • Type of Work: Edgebanding, Drilling, Routing • Maximum Panel Passage: 60 mm • Number of Working Fields: 2 Lodpfxeycvcxo Ad Nehb • Working Table: Pod and Rail • Number of Rails: 10 • Pod Position Indicators • Vacuum Cups for Securing Workpieces • Number of Vacuum Cups: 40 • Clamps for Securing Workpieces • Vacuum Pump • Number of Pumps: 1 • Single Pump Capacity: 250 m³/h • Boring Units: 1 (Top) • Vertical Boring Spindles: 20 • Horizontal Boring Spindles in X: 4 • Horizontal Boring Spindles in Y: 4 • Router Spindles: 1 (Top) • Number of Controlled Axes: 4 • Automatic Tool Changer • Motor Power: 13.2 kW • Edgebanding Operating Units: 1 • Gluing Unit: Mounted on Main Beam • Glue Pot for Hot-Melt Adhesive • Edge Coil Magazine • Number of Magazine Positions: 4 • Grooving Unit: 2 Top Units, Fixed for Grooving in X and Y • Tool Magazine: 1, with 16 Positions • Tools Positioned on the Machining Head • Combination Head for Edge Scraping and Glue Scraping • Air Jet Panel Edge Cleaning Unit • Control System: PC Control • Machine Programming Software: Bsolid • Protective Structure for Operating Units with Safety Sensors • Waste Chip Conveyor

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 560 mm, Dugard VMC 1000 E Fanuc Oi-MD control 10K Spindle 24 tool carousel X1050 Y540 Z560 Ljdpoycu D Ijfx Ad Nohb Chip Augger Through spindle coolant Some tooling included Very nice machine working video can be sent on request

Year of construction: 2004, condition: excellent (used), TECHNICAL DATA Travel X 760 mm travel Y 510 mm travel Z 610 mm table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm distance spindle to table min./max. 150/762 mm Spindle mounting steep taper DIN 69871 ISO 40 spindle speeds 10 - 10'000 rpm Drive power (30 min/const. ED) 11 kW Torque max. 236 Nm Power constant from 500 rpm Coolant tank 190 l Ball bearing linear guide in X,Y,Z axes Eilang X / Y / Z 30 / 30 / 20 feeds programmable 3,0 - 7600 mm/min positioning accuracy +/- 0,01 mm repeatability +/- 0,005 mm milling feed rate 3,0 - 11400 mm/min table load 1000 kg Automatic tool changer (double arm) 24 stations Max. Tool diameter 80 mm Max. tool length Tool length 300 mm Max. Tool weight 7 kg Machine weight 4700 kg Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL. - Coolant system Lodel Tpmdjpfx Ad Nshb - Coolant spray gun - Chip splash guard cabin - Flushing system to support chip disposal - Machine light - set of machine shoes - rigid thread cutting - spiral conveyor in the chip room - Pocket milling with islands - Electronic handwheel - ULTIMAX 4 control - 2 VGA color screens (text + graphics) - 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station - Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,800 h, functionality: fully functional, machine/vehicle number: 11415594804, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain iTNC 530, table load: 300 kg, TECHNICAL DETAILS Travel X-Axis: 500 mm Travel Y-Axis: 450 mm Travel Z-Axis: 400 mm Clamping surface: Ø 630 x 500 mm Swivel range: -5/+110 degrees Table load: 300 kg Speed: 10,000 rpm Spindle drive: 13 kW Tool magazine capacity: 60 Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain iTNC 530 Operating hours Power-on hours: approx. 65,300 h Spindle hours: approx. 38,800 h Machine weight: 4,850 kg Ljdoycuztjpfx Ad Nehb EQUIPMENT ECO Tower 60 by Lang NC swivel rotary table C+B axis 3D probe Renishaw Chip conveyor Paper belt filter coolant tank 600 l Internal coolant supply 20 bar Electronic handwheel Documentation

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Milling cutter diameter: max. 100 mm Slitting cutter diameter: max. 100 mm Saw blade diameter: max. 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Ljdpjycul Sofx Ad Nehb Machining operations: milling, drilling, tapping, thread milling, slotting, and sawing with stationary profile bar 6-sided machining: optional from the front, possible from below Profile bar protection: machining with stationary profile bar Robust and low-wear direct drives on all axes Axes: 5-axis control for spatial machining Display: 15-inch color screen Interfaces: USB ports, network connection 2-layer machining for pendulum operation Included tools (HSK holders) Two circular saws for aluminum

Condition: like new (used), Year of construction: 2023, functionality: fully functional, feed length X-axis: 2,800 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 250 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: CNI, controller model: N-Conex, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 60 mm, total height: 2,400 mm, total length: 11,500 mm, total width: 3,700 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 9,000 W, number of spindles: 10, number of slots in tool magazine: 12, Poyraz Makina VIGOR 2128 Flat Table CNC Machining Center (Year of manufacture: 2023) Very well-maintained CNC nesting machine from first ownership, fully functional and ready for immediate use. Technical specifications: Working area: 2100 × 2800 × 250 mm HSD spindle 9 kW / 24,000 rpm (Italy) CNI N-Conex control (Linux based on Windows 7) Becker vacuum pump 250 m³/h, 8 zones 12-position rotary tool changer Lhsdpfsxwa Ersx Ad Neb Equipment: – Automatic tool measurement – Automatic lubrication (Dropsa) – Automatic labelling (barcode system) – Loading & lift system – Discharge system with conveyor belt – Pressure rollers for multi-panel processing Machine is ideal for furniture production, doors, cabinet parts, kitchens, and interior fittings. Location: Bulgaria. Inspection possible at any time.

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, 50-position tool changer, HSK 63 tool holder, Lhedpfsyctf Dex Ad Neb Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours,

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,170 mm, travel distance Z-axis: 700 mm, table width: 850 mm, table length: 1,000 mm, rotational speed (max.): 24,000 rpm, Manufacturer: MIKRON Model: HPM 1350U Year of manufacture: 2015 Control: HEIDENHAIN iTNC 530 Number of axes: 5 axes Swivel spindle and CNC rotary table Travel (X/Y/Z): 1,350 x 1,170 x 700 mm Spindle & Performance Spindle type: motor spindle (electrospindle), manufacturer: STEP-TEC Max. speed: 24,000 rpm Tool holder: HSK-A 63 Automation & Tools Pallet changer: 3-way pallet changer Pallet size: 1,000 x 850 mm Tool magazine: 238 positions (rack magazine) Equipment & Accessories Cooling: belt filter system (manufacturer BMF) with ICS (internal coolant supply) Enclosure: full protective cabin Measuring probe (manufacturer Renishaw) Tool and accessory package Storage: tool container (4 drawers, 1 door), 2 trolley carts, telescopic drawer cabinet (11 drawers) Extensive HSK-A 63 tool holders FCS Breil zero-point clamping system Lhodpfjycr Uwjx Ad Nsb 3 grid plates (grid pitch 25 mm) Set-up tools and general accessories

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 Ljdpfx Adsvtnm Hj Nshb x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Dahlih MCV-1500 – Technical Specifications Machine Type: Vertical Machining Center Manufacturer: Dahlih Lhjdsycqx Uopfx Ad Neb Model: MCV-1500 Axis Travels X-Axis: approx. 1,500 mm Y-Axis: approx. 630 mm Z-Axis: approx. 700 mm Spindle Spindle Taper: BT / ISO 50 Spindle Motor Power: approx. 15–17 kW Max. Spindle Speed: approx. 4,500 rpm Tool System Automatic Tool Changer: approx. 24 tools Table Table Load Capacity: approx. 1,300–1,500 kg (depending on configuration) Control System Typically equipped with Fanuc CNC control

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Ljdpfxovxpuij Ad Nohb Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK Lhjdpfx Adsyackdo Nsb - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2007, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Lhodpsyaci Tjfx Ad Nob 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm Ljdpfx Ajyaci Hjd Nshb rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Lsdpfx Adsyabu Ie Nehb Subject to change and errors in technical details and specifications.

Condition: excellent (used), Year of construction: 2022, 5-axis simultaneous machining center. Travel paths: X 900 mm, Y 850 mm, Z 700 mm. Max. spindle speed: 18,000 rpm Tool magazine positions: 80 Lsdoyabkpepfx Ad Nshb Control system: Heidenhain

Condition: excellent (used), Year of construction: 2013, 5-axis machining center (BAZ) Lhodpfx Aeyaba Djd Nsb Control: Heidenhain Travel paths: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Max. clamping weight (rotary table): 1200 kg Max. spindle speed: 18,000 rpm

Condition: excellent (used), Year of construction: 2007, 1.) Work area: 500x552x300 mm 2.) Max. workpiece weight: 400 kg 3.) Milling spindle: 42,000 rpm 3.) Tool changer: 42 positions 4.) Guide system: Hydrostatic on all axes Lhodoyaa Umjpfx Ad Nsb 5.) Drive: Linear motors 6.) Control: Röders RMS6 7.) Machine weight: approx. 10,000 kg 8.) Required space: 3015x2510x2750 mm