Used Unimat 23 E for sale (71,408)

Condition: used, Year of construction: 2001, spindle diameter: 40 mm, total width: 2,000 mm, total height: 1,900 mm, total length: 3,800 mm, overall weight: 3,500 kg, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, No. 04556 Four-sided planer WEINIG Unimat 23 E Used, year of construction 2001 Spindles (bottom - right - left - top - bottom) All spindles Ø 40 mm, spindle motors with mechanical brake 1. Bottom spindle (surfacing spindle): 5.5 kW, with rebating device 2. Right spindle (jointing spindle): 7.5 kW 3. Left spindle: shared drive with right spindle (7.5 kW) 4. Top spindle: 5.5 kW 5. Bottom spindle: 11 kW Spindle speed 6000 rpm Working range Workpiece width with tool diameter 140 mm: 20 - 230 mm With aluminium planing heads, a working width of 260 mm is possible Workpiece height with tool diameter 163 mm: 8 - 120 mm Infeed table with jointing fence, length 2,000 mm Control and adjustment ATS positioning control with Siemens SIMATIC OP7 operator panel Left spindle: automatic positioning forward - backward Top spindle: automatic positioning up - down Motorised height adjustment of the feed, 1.1 kW adjustment motor with brake Mechanical digital readouts on the spindle adjustments Feed Feed motor 3 kW with brake Feed speed 6 - 36 m/min, infinitely variable via handwheel Serrated feed rollers, driven by cardan shafts Short workpiece package for processing short pieces Top pressure rollers, swing-away Axial adjustment of the feed rollers relative to the left spindle Pneumatic pressure system with pressure reducing unit, 3 pressure regulators with gauges on the control desk Pressure shoes and tables Pressure shoe before top spindle, swing-away Pressure shoe after top spindle with wooden insert Table plate with wooden insert at bottom spindle 5 Anti-kickback device on the infeed table Manual Waxilit pump for removing resin from the table Central lubrication points on the front of the machine Safety and noise protection Full soundproof enclosure with viewing window and interior lighting CE marking, BG-tested (wood dust tested) Chip extraction connection diameters 140 mm and 200 mm Power supply 400 V / 50 Hz Scope of delivery 5 planing heads, mounted on the spindles Various spare parts: feed rollers, spacer rings, drive belts, table inserts, operator tools Complete technical documentation Transport dimensions approx. 3800 x 2000 x 1900 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Cjdpj Afb Eaefx Aiiori Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Cjdpfx Ajz Da R Seiisri

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Credeu Damdopfx Aiioi

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces and a long dressing table. Short-piece package Grooved bed Mobile spindle Technical data: Credjzrx Emjpfx Aiioi - Spindles: 6 - Spindle 1: Bottom / 50 mm / 5.5 kW - Spindle 2: Right / 50 mm / 11 kW - Spindle 3: Left / 50 mm / Shared motor with spindle 2 - Spindle 4: Top / 50 mm / 5.5 kW - Spindle 5: Top / 50 mm / 5.5 kW - Spindle 6: Bottom / 50 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Planing table length: 2,500 mm - Feed: 5.5 kW - Axial stroke of vertical spindles: 80 mm - Axial stroke of horizontal spindles: 45 mm

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: Credpfxjz Tqzns Aiioi - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1995, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 1,500 mm, number of spindles: 8, Equipment: cabin, Weinig Unimat 23e Moulding machine (8 spindles) Credpfxoyx Tiio Aiisi Description; Year of construction 1995 Dimensions of the infeed table: 1500 mm Number of axes: 8 Spindle Sequence: Bottom-right-left-right-top-bottom-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 6-24m/min Groove bed: No (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, total width: 2,100 mm, total height: 2,400 mm, Year of manufacture: 2002 Colour: Blue Empty weight: 3.000 kg Dimensions (LxBxH): 410 x 210 x 240 cm Price: On request - Details: - └ Description: Needs repair - Year: 2002 - CE marking present: Yes - Serial number: 96164 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: No - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - Feed table length [mm]: 945 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 14 - Tool type: Standard Credpfx Aj Ahx Tqsiioi - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Fuse [A]: 63 - Transport dimensions: 4100mm x 2100mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Second-hand Weinig Unimat 23E universal automatic planing and grooving machine for four-sided planing and profiling of timber, featuring a mobile spindle and ATS system for electronic positioning, driven rollers in the table, a long planing table and a reinforced soundproof enclosure. Sample image! Technical data: - Spindles: 5 - Spindle 1: Bottom / 40 mm / 5.5 kW Crodpfxjz Td Dio Aiisi - Spindle 2: Right / 40 mm / 7.5 kW - Spindle 3: Left / 40 mm / Shared motor with spindle 2 - Spindle 4: Top / 40 mm / 7.5 kW - Spindle 5: Bottom / 40 mm / 7.5 kW - Working width: 230 mm - Working height: 120 mm - Feed: 3 kW / 5–24 m/min - Planing table: 2 m

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. Codoz Nir Repfx Aiisri The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding. Codpfx Aozuzdqjiisri

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: - Optional: Conversion to a conventional smooth table, on request. - Spindles: 5 - Spindle 1: Bottom / 40 mm / 5.5 kW - Spindle 2: Right / 40 mm / 7.5 kW Crsdpfxozrxzhs Aiisi - Spindle 3: Left / 40 mm / Shared motor with spindle 2 - Spindle 4: Top / 40 mm / 7.5 kW - Spindle 5: Bottom / 40 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Feed: 4 kW / 5–24 m/min

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Credpfx Aexz Hh Ueiioi Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, Year of construction: 2001, functionality: fully functional, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, – German-made – Year of manufacture: 2001 – Total power: 42 kW – Driven rollers in the table TECHNICAL SPECIFICATIONS: – Planing width: 230 mm – Planing height: 170 mm – Electric height adjustment – Spindle diameter: 40 mm – 1st (bottom) spindle: 7.5 kW – 2nd (left) spindle: 11 kW – 3rd (right) spindle – 4th (top) spindle: 11 kW – 5th (bottom) spindle: 5.5 kW – Continuously variable feed speed: 6–38 m/min – Feed motor power: 4 kW – Infeed table length: 1000 mm – Electric brakes – 5 driven top steel rollers – 1 driven top rubber roller – 2 driven table rollers: one is toothed – Air cushion in the table – Pneumatic pressure system Crjdpjw H Smhefx Aiioi – Feed via cardan shafts – Outlet diameter: 5 x 140 mm – Centralized table lubrication system – Machine dimensions (L/W/H): 390 / 210 / 230 cm – Weight approx. 4000 kg

Condition: used, Year of construction: 1996, Number of spindles 9 St. Working width 230 mm Working height 120 mm Weinig Unimat 23, 8 spindles + Uni-spindle ----- Width and height controlled Includes Haberkorn workpiece return system The machine is still in operation and can be viewed at short notice! Spindle arrangement ----- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: right Spindle 5: left Spindle 6: top Spindle 7: bottom Spindle 8: top Spindle 9: universal ----- Maximum feed rate: Hour meter: 8,848 h Spindle diameter: 40 mm Motor power ratings for individual spindles Codpfx Aio Aa A Ixoiori Overall dimensions: length x width x height including control cabinet: 7.2 m x 1.7 m x 2 m Planing table length: 2.2 m Planing heads included Tool wrenches included Driven table rollers: 6 pcs. Circuit diagram and operating instructions available Length x depth of the cross conveyor: 3.6 m x 1.8 m Length of the return belt: 4 m Control cabinet permanently mounted on the machine stand ----- Price of the above machine on enquiry! ----- Technical specifications as per the manufacturer – subject to change without notice!

Condition: used, Year of construction: 2004, Four-sided planing line: WEINIG planing machine Type Unimat 23 EL Year of manufacture 2004 Working width 230 mm Cedpfxjzg D Ebs Aiieri Working height 120 mm 1st spindle, bottom: 7.5 kW 2nd spindle, right: 7.5 kW 3rd spindle, left: 7.5 kW 4th spindle, top: 7.5 kW Feed system: 4 kW Short piece package UC Matic package Improved sound insulation Automatic infeed and outfeed system for different workpiece lengths and widths -Workpiece dimensions: Length 400-3500 mm (4000 mm) Width 40-200 mm Thickness 20-100 mm Weinig Hydro fine planing machine Uniplan Year of manufacture 2004 Working width 230 mm Working height 120 mm 1st spindle, bottom: 7.5 kW 2nd spindle, top: 7.5 kW

Condition: excellent (used), Heads: -lower -right -left -right -left Spindle diameter: 50 mm 5 rollers in the table Transport dimensions: Width: 2.4 m Height: 1.8 m Length: 5 m Without a feeder. Codpszba E Ujfx Aiisri

Condition: used, Year of construction: 1993, Number of spindles 6 St. Crsdpfx Aiezz Ai Uoiji Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer customer is still working on it, machine can be visited ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm 3 units, table rollers ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: excellent (used), functionality: fully functional, working width 230mm working height 160mm Crjdsz Dn T Ispfx Aiioi 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: excellent (used), total width: 1,600 mm, total height: 1,600 mm, total length: 3,600 mm, Weinig Unimat 23C with 5 Spindles. Max width 230mm Max Thickness 160mm Lubrication system for bedplates 4kW feed motor 36m/min No 1.  5.5kw - Bottom 6000rpm Csdsz Ezirspfx Aiisri No 2. 5.5kw - Right 6000rpm No 3. 7.5kw - Left 6000rpm No 4 . 7.5kw - Top 6000rpm No 6 . 5.5kw - Bottom 6000rpm (possible to add straight jointer here if needed). 50mm precision spindles Beam 0.55kW Full documentation included. 8x top feed rollers 140mm 4x bottom feed rollers (3x powered) Possible to supply with full mechanisation if needed. Very good dust manifold included. 1 set of 50mm tooling included. (Additional 50mm tooling available if needed.)

Condition: used, Weinig Unimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, featuring the ATS system and reinforced Technical data: - Spindles: 6 - Spindle 1: Bottom / 40 mm / 7.5 kW / 8,000 rpm - Spindle 2: Right / 40 mm / 7.5 kW / 8,000 rpm - Spindle 3: Left / 40 mm / 7.5 kW / 8,000 rpm - Spindle 4: Top / 40 mm / 7.5 kW / 8,000 rpm Cjdpfxjzrx Afj Aiieri - Spindle 5: Bottom / 40 mm / 7.5 kW / 8,000 rpm - Spindle 6: Universal / 40 mm / 7.5 kW / 6,000 rpm - Working width: 230 mm - Working height: 160 mm - Powered table roller: 1 - Feed rate: 24 m/min - Feed motor: 4 kW - Dressing table length: 2,500 mm

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Csdevtpk Hopfx Aiisri head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 86573, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, rotational speed (min.): 6,000 rpm, number of spindles: 6, Spindles: 6 Csdpfxsy Rrgkj Aiisri Working width: 230 mm Working height: 160 mm Spindle 1: Bottom (4.0 kW) Spindle 2: Top (4.0 kW) Spindle 3: Right (7.5 kW) Spindle 4: Left (7.5 kW) Spindle 5: Top, 5 kW Spindle 6: Bottom, 5 kW

Condition: used, Year of construction: 1998, Four-sided planing machine Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) Crjdpfx Aiezuzfusioi - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, Four-sided planer / Moulding machine Manufacturer: Weinig Model: Profimat 23 E Year of manufacture: 1999 For four-sided planing and profiling Max. planing width: 230 mm Max. planing height: 120 mm Crodjz D Ev Tjpfx Aiiei 5 spindles Spindle diameter: 40 mm Spindle arrangement: Bottom, approx. 4 kW Right + Left, approx. 5 kW Top, approx. 4 kW Bottom, approx. 4 kW Connection: 380 V, 50 Hz

Condition: excellent (used), functionality: fully functional, spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm variable regulated feeder Codpfxey N N S Uj Aiieri electric adjustment of infeed fence electric adjustment of infeed table ATS fast locking spindle system