Used Unicontrol 10 for sale (29,335)

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Lasdpfsxpi Dujx Aftjd Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Lodpfx Aezawizeftead Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Year of construction: 2000, Storage location: Nattheim Lsdpfx Aevwdmweftsad

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Lajdpfjfzzhyex Aftjd Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: used, device 10 spindle diameter 40 und 50 mm engine 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) mitre saw for the production of windows, elements, and doors. Frame-by-frame, series production, or individual parts production with 2 tenon and slot spindles, including Oertli tool set - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80) mm 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW - Double part package - Re-milling package with re-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop Lasdpov Ag Tdsfx Afted - Studio window setup - Unit for edge rounding from below with crosscut saw - Rung support strip - Includes extraction pipe system - Includes Oertli tool set - Further technical data and tool drawings available on request.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Lasdpfxexmr N Ie Aftjd Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: used, Used control cabinet from a Weinig Unicontrol 10, suitable as a spare parts donor or for building a new control cabinet. Contents include, among others: - Siemens Simatic S5 - Siemens EMG 45 Lajdpfjrrk I Hox Aftsd

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 3,000 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 142 mm, controller manufacturer: SIEMENS, controller model: WS 400-20, CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis stroke: 3,000–3,500 mm (version dependent) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Tenoning/slotting spindle quantity: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle motor power 1: 11 kW • Tenoning spindle motor power 2: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Profiling spindle quantity (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (flight circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Horizontal profiling unit (top) motor power: 3 kW • Horizontal profiling unit spindle diameter: 40 mm Laedpfxjy Ixpas Aftod • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 83406, Window machining centre Weinig Unicontrol 10, year of manufacture 1998 Lsdpfxsy Sxlpo Aftsad

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm Laedpfxjx S Sk Ej Aftsd • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Ljdetq U A Ispfx Aftead

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Ljdoznclcspfx Aftead Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale: a Lenze geared motor with a worm gear. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with only normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, mixers, and other devices requiring a reliable drive with high torque. Technical specifications: Manufacturer: Lenze Motor type: DERA 071-22E Gearbox type: GSN04-1NHAR Power: 0.37 kW (50 Hz) Power supply: 3×230/400 V Frequency: 50 Hz Motor speed: 1400 rpm Output speed: 140 rpm Gear ratio: i = 10 Torque: 22 Nm Lsdoznb Ivspfx Aftsad Protection class: IP55 Insulation class: F Manufacturer: Lenze, Austria Condition: 100% functional – tested. Normal signs of use. Sold exactly as shown in the photos.

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Lajdpfxjwtq Dts Aftjd Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: excellent (used), For sale: a three-phase motor with a brake, model SEW-Eurodrive RF32DT80K4BMG/HF/TF. The unit is 100% functional, tested, and ready for operation. Before sale, the motor was thoroughly inspected and operates flawlessly. The housing shows normal signs of use and some localized paint chipping, as shown in the pictures. These do not affect the proper operation or technical parameters of the device. Technical data: Manufacturer: SEW-Eurodrive Type: RF32DT80K4BMG/HF/TF Power: 0.55 kW Supply: 3×230/400 V AC, 50 Hz Rotational speed: 1360 rpm Motor torque: 10 Nm Gearbox: RF32 Electromagnetic brake: 230 V AC Rated current: 3.05 A (230 V Δ) / 1.76 A (400 V Y) Lodpfxezna Tko Aftead Power factor (cos φ): 0.77 Protection class: IP54 Insulation class: H Operating mode: S1 Weight: 18.57 kg

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Ljdszmyybspfx Aftoad The scope of supply includes exactly what is shown in the pictures.

Condition: excellent (used), I am offering for sale a professional RF signal generator, the Agilent 83651B Synthesized Sweeper, designed for laboratory, research and development, and service applications. This device is used for testing microwave circuits, telecommunications equipment, and high-frequency measurements. Model 83651B offers a wide frequency range from 10 MHz to 50 GHz, making it ideal for laboratories involved in electronics, microwave technology, and telecommunications. The device is equipped with numerous measurement and control connectors, a GPIB interface, 10 MHz reference inputs and outputs, and the ability to interface with other measuring instruments. The equipment comes from a dismantled laboratory. It has not been tested by us and is sold as a used device. The visual condition is shown in the attached photos. Technical specifications: Ledpszl H Ddjfx Aftoad Manufacturer: Agilent Technologies Model: 83651B Type: Synthesized Sweeper / RF Signal Generator Frequency range: 10 MHz – 50 GHz Power supply: 230 V AC, 48–66 Hz Communication interface: GPIB (IEEE-488) 10 MHz reference input and output Control inputs and outputs (Trigger, Sweep, FM, AM, Pulse) Applications: laboratories, research and development, telecommunications, microwave technology, RF measurements Condition Used device. Not tested. Good visual condition, with normal signs of use visible in the photos. Sold in the exact condition as shown in the photographs.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift Lasdpezm Ek Esfx Afted - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: good (used), Perfecta SL-10 P Paper Stack Lift with Sidewall Lodpozlag Sefx Aftsad The device is in perfect technical and visual condition. Virtually unused. Equipped with an adjustable sidewall for easy stacking. Designer look. Lifting capacity: 1000 kg Plate size: 900 x 1300 mm Power supply: 380 V Weight: 650 kg The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Lifting is operated by a photocell. Quiet hydraulic unit.

Year of construction: 2010, condition: excellent (used), Complete microbrewery for sale: Brewhouse 10 HL: High-quality brewing pan (Schulz), double-walled with smooth cooking process, lauter tun and whirlpool, complete piping, hoses. Automatic mashing with electrical pannel, control for hot water heating, malt mill, small appliances. Fermentation cellar: Wort cooler, ice water container, 5 open fermentation tanks 10HL, 5 storage tanks 20 HL, 3 serving tanks 10 HL. Wort pump, hoses, temperature control. Precoat filter, yeast pan. Lasdpfef Ni Rvsx Afted Bottle cellar: Fully automatic inline filler, 8 digits, soft wheel, round bottle cleaner Lots of accessories, small parts, hoses, etc. For sale as build in. Cranes and loaders for free.

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Inlet of the loading hopper at the top: 1980x1050mm - Inlet of the loading hopper at the bottom: 980x1050mm - Outlet for shredded wood: diameter 210mm - Working width of the rotor: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife dimensions: 40x40mm - Screen: 18mm - Pressing drawer - Electric auto-reversing - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approximately 3500kg – Manufactured in France – Similar to WEIMA WL 10 – New knives installed – Auto-reversing – Pressing drawer Ljdpfx Aszh Iq Dsftead – Very good condition – Used wood chipper Net price: 72,900 PLN Net price: 17,357 EUR Net price calculated using an exchange rate of 4.2 PLN/EUR (Prices may be subject to change if the exchange rate fluctuates significantly)

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Laedpfxeyrh I Eo Aftjd Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: good (used), Year of construction: 2004, functionality: fully functional, GLASS FLAT GRINDING MACHINE Lsdpfxozgvl Ho Aftoad

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed Lsdpfx Afozc Iv Djtjad - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Lajdpfext Tgnsx Afted Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)