Used Fp3 for sale (113)

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories: various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by arrangement. Kodpsxu Uvtofx Abnodr

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Dear Sir or Madam, We hereby offer a milling machine, type Deckel FP3. The machine has been thoroughly inspected in our workshop and is in very good condition. We would be happy to install safety or additional equipment for you directly. We look forward to receiving your inquiry! Delivery time: Available immediately Dimensions: 2.00 x 1.60 x 1.90 m (L x W x H) Weight: approx. 1500 kg Travel distance X-axis: 500 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 380 mm Table clamping area: 800 x 420 mm Speed range: 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500 mm/min Rapid traverse: approx. 1500 mm/min Ksdpfx Ajzldpkobnedr Additional equipment and accessories: Technical documentation, leveling feet, spanner, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine you choose - You can freely decide on the paint color of the machine you choose - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We will gladly take care of the shipping and/or installation.

Condition: used, Year of construction: 2025, machine/vehicle number: 202530090, total width: 800 mm, total height: 1,200 mm, total length: 800 mm, overall weight: 85 kg, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, Laser system for marking, housing with manual lift-up door, focus laser for determining the focus position, Z-axis (software-controlled), rotation unit (360°), mobile extraction unit (Vaupel LAB-1f, 210W, serial no.: CP24-52-1-0209, year of manufacture: 2024). The condition is evident from the attached expert report. Kdsdpfxozvm Tgo Abnor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2201-5046, Good condition with various tool holders. SK40 - S20 Heidenhain active control Kdedpfxsy Al Tns Abnsr Automatic feeds on all axes. 4th axis controlled.

Condition: good (used), functionality: fully functional, Friedrich Deckel FP3LG milling machine Original and well-maintained Deckel FP3LG. Travel range X-axis: 800 mm Travel range Y-axis: 300 + 200 mm Travel range Z-axis: 400 mm Spindle speeds from 40 to 2000 rpm. Kdodpfey Ulc Hsx Abner Various feed rates. Equipped with an automatic spindle cover.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake Kdedpfxey D Tl Ij Abnor >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout (Heidenhain) and Infinitely Variable Feed, Original Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine no. 2201-5527 >> Swivel-tilt-rotary table Kjdpey Eqkzjfx Abnjdr >> Speed range: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be displaced 200 mm on spindle carrier >> Vertical and horizontal quill, SK40, extendable >> Pull stud system: M16 >> Weight: approx. 1,500 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Offered here is a universal milling machine Deckel FP3 in very good original condition. The machine shows minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable in all three axes, and each axis features rapid traverse. A significant advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to defined positions. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site. The machine is available immediately.

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Kjdju Ezb Ejpfx Abnsdr

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Kjdpfx Abewg S Nkenjdr

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication Kdedpfexu E I Hox Abnsr About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. The machine is immediately available!!!

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : Kdedpfx Aju Dm E Hsbnor On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. For DECKEL milling machines FP1 - FP2 - FP3 - FP4 Kdjdpfshvz Iisx Abnjr Individual sales upon request.

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp + Various SK40 tool holders and collet set (S20x2) Kdsdsyb Su Uspfx Abnjr Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Kdodeuclbzjpfx Abnor

Condition: reconditioned (used), functionality: fully functional, Equipment: documentation/manual, Dear Sir or Madam, We hereby offer a Deckel FP3 milling machine. The machine is undergoing comprehensive partial refurbishment in our workshop and is therefore in excellent condition. We are happy to retrofit safety devices or additional equipment according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00x1.60x1.90 m (LxWxH) Weight: approx. 1,500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Table clamping surface: 800x420 mm Speed range: 40-2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master craft business specializing in mechanical engineering - All machines are thoroughly inspected Kdjdpeq H Eabsfx Abner - All lubricants and, if necessary, worn parts are replaced beforehand - We can perform a complete or partial overhaul of your selected machine upon request - You are free to choose the paint color for your selected machine - On request, you can order additional accessories such as tools, etc., directly - On request, we can also install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation at your location

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis Active TNC 113 - Digital display Heidenhain, point-to-point control, stepless feed Technical data: >> Year of manufacture 1980, machine no. 2302-2430 >> 3 axes, digital active display TNC 113 >> Swivel-tilt table (clamping area 1000 mm x 520 mm) Ksdozquq Njpfx Abnedr >> Speed: 25 - 2500 rpm >> Feed and rapid traverse in 3 axes >> Feed from 5 to 500 mm/min, stepless >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2 / 4 KW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be adjusted by an additional 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 2500 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant system About the machine: Offered is a Deckel FP3L universal milling machine in very good condition. The vertical head can be moved by 200 mm to enable an even larger working area. Even at maximum speeds, the milling machine runs smoothly. A central pump ensures lubrication of the various axes. The special feature of this machine type is its basic design; it is a machine with a slanted table bed. The movements are assigned to the spindle and thus to the tool. The accuracy is therefore very high, as different workpiece weights have no influence on the axis movements. Mechanically and electrically inspected. In this newer FP3L model, the feed can be adjusted steplessly in three axes; the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain point-to-point control, you can enter dimensions that the machine will automatically move to. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be delivered with CE conformity.

Condition: used, Used Deckel FP3a tool milling machine for metalworking. The machine is in used condition but remains fully functional and ready for operation. It features a sturdy construction and various functions for precise metal machining. Net price plus 23% VAT Spindle motor: 2/4 kW Spindle speed: 25–2500 Spindle SK 40 Quill travel: 100 mm Feed motor: 1.5 kW Feed speed: 5–500 mm/min Feed override: 0–120% Rapid traverse: 1500 mm/min Mechanical/manual travel: X: 490/500 mm Y: 290/300 mm Z: 390/400 mm Ksdpfx Aexluu Rsbnsdr The head can be shifted by 200 mm Machine weight: 1750 kg Maximum

Year of construction: 1975, condition: good (used), Includes FP3L milling machine head with adjustable angle table, vertical milling head, SK 40, S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by arrangement. Kdedpfjildwxjx Abnjr

Condition: reconditioned (used), Year of construction: 1988, Universal milling machine Manufacturer: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with warranty Geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with clamping thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating manual Kedpfsh Rv U Esx Abnedr - Drill grinding device with diamond disc -used, as is-

Condition: used, Motor output 3 kW Kodpfev Nq Sksx Abnodr total power requirement 3 kw Weight 1.400 kg

Condition: used, power capacity / kW volt / V Kdsdpfxjy S Eb Rj Abnsr ampere / A DECKEL MONITOR Bildschirm DIALOG FP2 / FP3

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Kdodpfexbx R Usx Abnor

Condition: like new (used), functionality: fully functional, mileage: 4,966 km, power: 200 kW (271.92 HP), first registration: 08/2026, fuel type: diesel, overall weight: 14,000 kg, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 3,150 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2025, operating hours: 295 h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, trailer coupling, Unimog U427 Uni-Touch First registration: 03.11.2025 Mileage: 4,966 km Operating hours: 295 h Tires: 365/85 R 20 - Michelin X Force ZL Net price: 178,000 EUR Gross price: 211,820 EUR Equipment: AZ1 Axle ratio i = 6.377 B30 Differential lock B5B Trailer brake, 2-line C1H Wheelbase 3150 mm C7H Protective device, side CP3 Front mounting plate DIN76060, Type B, Size 3 D6F Automatic climate control DF3 Air-suspension driver's seat, with seat heating Kdedpfxszvrtre Abner DG1 Additional steering column switch, left DG3 Armrest, right, with control lever mount, driver's seat DG5 Control lever, pluggable, on driver's seat armrest DH4 Mount, universal, for external control unit E33 Battery main switch on battery box E40 ABS trailer socket 24V, 7-pole / 5-pin E45 Front socket 24V, 7-pole E6Z Reverse warning ED2 Continuous power sockets 12V (C3), 12V and 24V center console ED6 On-board socket 24V/25A in the cab, with C3 signal EF6 Rear-view camera, tractor unit end EM6 Monitor, for camera system ES6 Universal electrical interface according to EN16330 ES8 Pre-wiring for UNI-TOUCH interface, front ES9 Pre-wiring for UNI-TOUCH interface, rear F5L Outside sun visor, transparent F6B Windshield, clear, heated FP3 Cab strength according to ECE-R-29/03 FT6 Mirror version, vehicle widened G34 EasyDrive (Hydrostatic drive) (SN) G49 Automatic Shift (EAS), two-pedal operation GM2 Hydraulic transmission oil cooler, oil/air GN1 MB full-synchronization reversing gearbox, UG130, 8 forward/6 reverse gears H55 Hydraulic connector, rear, 4-way, cell 1+2 H58 Pressure line, rear, 2nd hydraulic circuit H59 Separate return line, rear HE1 Hydraulics for tipping device HN3 Hydraulic system, 2-circuit, 2-cell, fully proportional, snowplow release J1C Combined instrument, 12.7 cm, with video function J1M Tachograph digital, 2nd generation, version 2, ADR J1S Tachograph manufacturer VDO J48 Warning light for telescopic cylinder J4V Seat belt warning, driver and passenger side J5Q Digital radio, with USB port and Bluetooth J8N Pre-wiring for Truck Data Center 8, base J9D Pre-wiring for toll collection JA1 UNI-TOUCH control system, with 10.5" touchscreen K3T AdBlue tank 25 l KC2 Tank 250 l, left, aluminum LB5 Warning light, LED, yellow, left, with tripod LE4 Work light, cab rear wall, top, LED LE6 Additional headlight, height-adjustable, A-pillar, LED, heated M0U Noise encapsulation, special package M2C Engine OM936, R6, 7.7 l, 200 kW (272 hp), 1100 Nm M4X Engine version Euro VI, E M5V High Performance Engine Brake M74 Radiator quick cleaning system Clean-Fix N08 Engine PTO including front PTO shaft P60 Platform subframe PB6 Platform, internal dimensions 2385x2075x400 Q94 Trailer coupling, pintle hitch, large, ring, bolt 38.5 R32 Flatbed rims 10.00V-20 S8A First aid kit S8B Fire extinguisher, 2 kg SC4 Warning strip red/white, retroreflective SV2 Warning triangle and warning light TS3 Weight variant 14.0 t (7.1/8.0) VB7 Unimog - series of implement carriers VH2 Registration tractor unit Germany Offer subject to change. Errors, changes and prior sale reserved. All information without guarantee. Our General Terms and Conditions apply. Location: Peter Meineke Becklinger Str. 17 29683 Bad Fallingbostel-Dorfmark Viewings and/or test drives only by prior appointment. Please coordinate by phone before arrival, as the vehicle/equipment may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: used, Year of construction: 1973, Tool milling machine DECKEL FP3, No. 1784, year of manufacture 1973, general overhaul by Huttelmaier (No. 20/6170, 25.09.1995, headstock overhauled in 2014), travels XYZ = 800 x 500 x 380 mm, spindle speeds 40 - 2,000 rpm, XYZ control HEIDENHAIN. Kodpfx Ajzlpmbebnodr

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min Kdsdpju U E T Iofx Abnor spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *